Air to Water Intercooler Special Pages Index

This is for internet marketing purposes and might not be very useful!

Privacy Policy
Shipping Policy
Secure Shopping
Safe Shopping Guarantee
Scammers and Phishing Attempts: Avoid Scammers and Phishing Attempts
Intercooler Pipe Fabrication, AN Fittings and Stainless Steel Lines, Water/Air, and Aluminum Pipes: Intercooler Pipe Fabrication, AN Fittings and Stainless Steel Lines, Water/Air, and Aluminum Pipes
Which to choose: Aluminum or Stainless Steel?: Aluminum or Stainless Steel - What
AN Fittings and Stainless Steel Lines: What size are they, really?: AN Fittings and Stainless Steel Lines: What size are they, really?
New Website for AN Fittings: AN Fittings For Sale Here!
BOV Myths and Adjustment: Read before installing your aftermarket BOV!
How shipping is calculated: Calculate Turbo Parts Shipping Cost right here.
About phone orders: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Intercooler End Tank Modification
Engine Cooling System
Why You Need to Run Ethanol / E85 Right Now: Why You Need to Run Ethanol / E85 Right Now
FAQ about our service: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
FAQ: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Page about our shipping methods.: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.

Our Forza 2 Sponsorships: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About our new website: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Career Oppertunities: Help us design the next Charge Air Cooler!
Aluminum Pipes, Stainless Steel Pipes, and Exhaust Parts: Aluminum Pipes, Stainless Steel Pipes, and Exhaust Parts - you want them? we got them.
AN Fittings and Stainless Steel Lines: AN Fittings and Stainless Steel Lines
Text from our Homepage: Air to Water Intercooler and more! WWW.FROZENBOOST.COM
Text from our Homepage: Your source for Intercooler Pipe Fabrication Parts
Our In Stock Guarantee: Silicone Parts Always In Stock!
Intercooler hoses business: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Making a Silicone Intake: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Largest shipper in Fountain CO: Trying to build your own DIY Cold Air Intake? Look no farther.
Portable garages and engine treatment: Portable garages and engine treatment
Picking up in Colorado Springs: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Our Low Price Guarantee: Shop Here for the Lowest Price on Silicone Couplers!

New business hours: Silicon parts and more at www.siliconeintakes.com.
Aluminum Intake Piping Fitment Guide: AluAluminum Intake Piping Fitment Guide
Enter the Pre-Intercooler Cooling Pipe: Enter the Pre-Intercooler Cooling Pipe
PTFE / Teflon - The Right Way To Go: PTFE / Teflon Stainless Steel Lines - The Right Way To Go
Removal Links for UK: Removal Links for UK
Stickers currently available: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Stickers Coming Soon: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Post Office Reliability: Check here for reinforced silicone couplers.
Our return policy: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About our Secure Shopping Guarantee: Our Secure Shopping Guarantee is simple and effective.
Benefits of a Silicone Intake: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Changes to some of our policies: We have the silicone boot you are looking for.
Our new shipping rates: Get your silicone couplet here.
Using our shopping cart: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About Silicone Intake Components: Silicon intake parts are very effective.
How to get a sponsorship for your car: How to get a sponsorship for your car
Shipping Updates: Check here for Turbocharger Parts - installation and upgrades
EBay, VeRO, and how it damages the consumer: EBay, VeRO, and how it damages the consumer
Benefits of Water to Air: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
FAQ about water/air intercooling: Buy your Water to Air Heat Exchanger here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.

Air to Water Intercooler Categories Index

This is for internet marketing purposes and might not be very useful!

Liquid Air Intercooler: Liquid Air Intercooler
Air/Water IC: Air/Water IC
Water to Air Heat Exchanger: Water to Air Heat Exchanger
Liquid Air Adapter: Liquid Air Adapter
Front Mount Intercooler: Front Mount Intercooler
Stainless Steel Teflon Fuel Lines: Stainless Steel Teflon Fuel Lines
Aluminum Pipes: Aluminum Pipes
High Performance Red Air Filters: High Performance Red Air Filters
T Bolt Clamp: T Bolt Clamp
Intake Pipe Reducer: Intake Pipe Reducer
30 Silicone Bends: 30 Silicone Bends
Turbocharger Part: Turbocharger Part
60 Silicone Bends: 60 Silicone Bends
Holset Turbocharger: Holset Turbocharger
135 Degree Bends: 135 Degree Bends
180 Silicone Bends: 180 Silicone Bends
Hump Hose: Hump Hose
Silicone Hose: Silicone Hose
Bending Reducer: Bending Reducer
Intake Leak Pressure Tester: Intake Leak Pressure Tester
Turbo Piping: Turbo Piping
DSM Intercooler Piping: DSM Intercooler Piping
BOV: BOV
Prosport Digital Gauges: Prosport Digital Gauges

Air to Water Intercooler Products Index

This is for internet marketing purposes and might not be very useful!

150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 16x12.5x4.5, S/S I/O (Type 52)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 20.25x15.5x12 S/S I/O (Type 54)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 17x12.25x9, S/S I/O (Type 53)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 12x12.25x4.5, S/S I/O (Type 51)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 11"x9"x3.5" - S/S I/O (Type 50)
Prosport IAT/Intake Air Temperature Digital Gauge: Prosport Dual Intercooler Air Temperature Gauge Digital Display-52mm
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Black
Carbon Fiber 45: 3.5" Carbon Fiber 45° Elbow
Carbon Fiber 45: 3" Carbon Fiber 45° Elbow
Carbon Fiber 90: 3.5" Carbon Fiber 90° Elbow
Prosport Oil Pressure Digital Gauge: Prosport Oil Pressure Gauge Digital Display-52mm
Carbon Fiber 45: 2.5" Carbon Fiber 45° Elbow
Stainless Steel Exhaust Gasket: Stainless Steel Gasket, 5-bolt
Prosport Volt Digital Gauge: Prosport Volt Gauge Digital Display-52mm
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Black
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Blue
Liquid to Air: Water to Air Intercooler - 16"x12.5"x4.5" - S/S I/O (Type 5)
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 4.0"
Long Flow Style Water to Air Intercooler: Water to Air Intercooler, 13.5"x4"x3.5", Long Flow (Type 20)
Silicone 90: 3.0" Silicone 90° Elbow, Black
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", S/S I/O (Type 12)
Turbo Coupler: 3.0" Silicone Hump Hose, Black
T Band Clamp: T-Bolt Clamp for 3.0" Silicone Parts
Air to Water Heat Exchanger: Water to Air Intercooler Radiator - 26x7x3.5 (Type 101)
Silicone 90: 2.5" Silicone 90° Elbow, Black
Hose Clamp: T-Bolt Clamp for 2.5" Silicone Parts
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 3.0"
Air to Water Radiator: Water to Air Intercooler Radiator - 26x7x2 (Type 118)
Water to Air Ice Box Reservoir: Water to Air Ice Box Reservoir
Silicone Turbo Hoses: 3.0" Silicone Straight Coupler, Black
Tube Reducer: Silicone Reducer, 3.5" to 3.0" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.5"
Air to Water Radiator: Water to Air Intercooler Radiator - 24x12x1 (Type 100)
Long Flow Style Water to Air Intercooler: Water to Air Intercooler - 14.5"x5"x4.5", Long Flow (Type 19)
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 3.0"
Water to Air Intercoolers: Water to Air Intercooler, 20.25"x15.5"x12", S/S I/O (Type 27)
Silicone 90: 4.0" Silicone 90° Elbow, Black
Pipe Reducer: Silicone Reducer, 4.5" to 4.0" - Black
Small Liquid/Air Intercooler: Water to Air Intercooler - 11"x9"x3.5" - S/S I/O (Type 9)
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2.5"
T Bolt Hose Clamp: T-Bolt Clamp for 4.0" Silicone Parts
V Band Exhaust Clamp: 3.0" V-Band Clamp
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Black
T Bolt Clamp: T-Bolt Clamp for 2.0" Silicone Parts
Silicone Turbo Hoses: 2.5" Silicone Straight Coupler, Black
Tube Reducer: Silicone Reducer, 3.0" to 2.5" - Black
Pipe Reducer: Silicone Reducer, 5.0" to 4.0" - Black
Water To Air: Water to Air Intercooler - 12"x12.25"x4.5" - S/S I/O (Type 3)
Pipe Reducer: Silicone Reducer, 2.75" to 1.75" - Black
Black Bend: 2.0" Silicone 90° Elbow, Black
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Black
Water to Air Intercoolers: Water to Air Intercooler, 12.25"x12.25"x4.5", Bend I/O (Type 14)
Water to Air Intercoolers: Water to Air Intercooler, 16.25"x12.25"x4.5", Bend I/O (Type 15)
Exhaust Clamp: T-Bolt Clamp for 3.5" Silicone Parts
Tube Reducer: Silicone Reducer, 3.0" to 2.75" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 3.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 3.0"
Silicone 45: 4.0" Silicone 45° Elbow, Black
Air to Water Radiator: Water to Air Intercooler Radiator - 12x12x2 (Type 117)
Aluminum Pipe: 2' Straight Aluminum Pipe, 3.0"
Silicone Turbo Hoses: 4.0" Silicone Straight Coupler, Black
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Black
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", Through I/O (Type 22)
Long Flow Style Water to Air Intercooler: Water to Air Intercooler, 15"x 6.5"x 6", Long Flow (Type 26)
T Bolt: T-Bolt Clamp for 2.25" Silicone Parts
Water to Air Intercoolers: Water to Air Intercooler, 16.5"x12.25"x4.5", Thru I/O (Type 17)
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.5"
Pipe Reducer: Silicone Reducer, 4.0" to 3.75" - Black
Band Clamp: T-Bolt Clamp for 2.75" Silicone Parts
Remote Radiator Filler Cap: Remote Radiator Inline Filler Cap - 3/4"
Aftermarket Boost Vacuum Hose: 6mm Black Silicone Boost/Vacuum Hose Per Ft.
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 3.0"
High Temperature Water Hose: 3/4"(19mm) ID water hose, black (per foot)
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Black
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Black
Silicone 45: 3.0" Silicone 45° Elbow, Black
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.5"
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 4.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 3.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.5"
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Black
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 3"
Water to Air Intercoolers: Water to Air Intercooler, 150 PSI 17"x12.25"x9", Through I/O (Type 55)
High Flow Cat: AllFlow Test Pipe, Mild Steel - 3"
Silicone 45: 2.5" Silicone 45° Elbow, Black
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Black
Intercooler Fans: 7" Radiator Fan with Mounting Kit
Pipe Reducer: Silicone Reducer, 4.0" to 2.5" - Black
Silicone Boost Vacuum Hose: 4mm Black Silicone Boost/Vacuum Hose Per Ft.
Front Mount Intercooler: Intercooler - 31"x11.75"x3" - 2.5" Inlet/Outlet (Type 1)
Aluminum Pipe: 2' Straight Aluminum Pipe, 4.0"
Aluminum Pipe: 2' Straight Aluminum Pipe, 3.5"
Turbo Coupler: 3.5" Silicone Hump Hose, Black
Silicone Hose: 3.0" Silicone 1' Straight Hose, Black
Reducer Elbow: Silicone Reducer, 45° bend - 2.25" to 2.0" - Black
Tube Reducer: Silicone Reducer, 3.5" to 2.75" - Black
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 114)
Heat Exchanger: Intercooler - 31"x11.75"x4" - 3" Inlet/Outlet (Type 2)
Mandrel SS: 2' Straight Stainless Steel Pipe, 3.0"
02 Sensor Bung: Stainless Steel O2 Sensor Weld Bung, Lip Style, M18x1.5
Reducer Elbow: Silicone Reducer, 45° bend - 3.5" to 3.0" - Black
Silicone Elbow: 2.25" Silicone 90° Elbow, Black
Silicone Hose: 3.0" Silicone 2' Straight Hose, Black
Silicone 135: 3.0" Silicone 135° Elbow, Black
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 4.0" - Black
Silicone 45: 3.5" Silicone 45° Elbow, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 3.0"
Silicone Hose: 2.5" Silicone 2' Straight Hose, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.5"
Electric Radiator Fan: 10" Radiator Fan with Mounting Kit
V Bolt Clamp: 2.5" V-Band Clamp
Silicone 90: 3.5" Silicone 90° Elbow, Black
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 4.0" - Black
: Silicone Port System
V Band Clamps: 2.5" Stainless Steel V-Band Clamp Rings (Set of 2)
Silicone Hose: 4.0" Silicone 2' Straight Hose, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 3.5"
Stainless Steel Brake Lines: PTFE Braided Stainless Steel Lines, -6 AN, per ft.
V Band Clamps: 3.0" Stainless Steel V-Band Clamp Rings (Set of 2)
Silicone Turbo Hoses: 2.0" Silicone Straight Coupler, Black
Tube Reducer: Silicone Reducer, 2.5" to 2.0" - Black
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Black
T Bolt Hose Clamp: T-Bolt Clamp for 1.5" Silicone Parts
Radiator Cooling Fan: 12" Radiator Fan with Mounting Kit
Turbo Coupler: 2.5" Silicone Hump Hose, Black
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Black
Turbo Intercooler: Intercooler - 31"x11.75"x3" - 3" Inlet/Outlet (Type 0)
Mandrel SS: 2' Mandrel Bent Stainless Steel 45° Bend, 3.0"
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 3.0"
V Band Clamps: 3.0" Mild Steel V-Band Clamp Rings (Set of 2)
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 3.0" - Black
Mandrel SS: 2' Mandrel Bent Stainless Steel 180° Bend, 3.0"
Tube Reducer: Silicone Reducer, 3.0" to 2.25" - Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 90°Short
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.25" - Blue
Pipe Reducer: Silicone Reducer, 4.0" to 2.5" - Blue
Black Elbow: 2.0" Silicone 45° Elbow, Black
Silicone 90: 1.5" Silicone 90° Elbow, Black
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 115)
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 3.5"
Silicone Elbow: 2.5" Silicone 90° Elbow, Blue
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.5"
Water to Air Intercoolers: Water to Air Intercooler, 16"x12.25"x4.5", O/S I/O (Type 18)
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 3.0"
Tube Reducer: Silicone Reducer, 2.75" to 2.5" - Black
Compact Liquid/Air Intercooler: Water to Air Intercooler - 11"x9"x3.5" - O/S I/O (Type 8)
Intercooler Pipe Fabrication: Stainless Steel Joiner, 2.0"
Water to Air Intercoolers: Water to Air Intercooler - 11"x9.25"x3.5" - Bend I/O (Type 13)
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.75"
SS Style BOV Flange: Universal BOV with 1" Inlet and Outlet - Silver (Type 10)
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.25" - Black
Compressor Tbolt: T-Bolt Clamp for 1.75" Silicone Parts
DIY Intercooler Piping: Stainless Steel Joiner, 2.5"
Top to Bottom Intercooler: Intercooler - 19.75x12x3.5, 2.5" I/O, Top to Bottom (Type 11)
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.0" - Black
02 Sensor Bung Notched Cut: Stainless Steel O2 Sensor Weld Bung, Notched Style, M18x1.5
Silicone Boost Vacuum Hose: 10mm Black Silicone Boost/Vacuum Hose Per Ft.
Automotive Pump Mounting Bracket: Pump Mounting Bracket
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2.5"
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x10" (Type 25)
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x8" (Type 24)
Pressure Tester: Intake Pressure Tester, CAP ONLY
: Stainless Steel Line 90° Adaptor, -4 AN Black
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x6" (Type 23)
WPT717 Bosch Pump Harness: Bosch Cobra Water Pump Wiring Harness
T3 Turbo Blanket: T3 Turbo Blanket
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 4.0"
Aluminum Pipe: 1' Straight Aluminum Pipe, 3.0"
Silicone 135: 2.5" Silicone 135° Elbow, Black
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 90° Bend, 2.5"
Turbo Piping: Stainless Steel Joiner, 4.0"
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Black
T4 Turbo Blanket: T4 Turbo Blanket
Mandrel SS: 2' Mandrel Bent Stainless Steel 90° Bend, 3.0"
Mandrel Thick SS: 2' Extra Thick Stainless Steel 90° Bend, 2.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.0"
Silicone Bend: 2.25" Silicone 45° Elbow, Black
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", O/S I/O (Type 21)
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.25"
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.0" - Black
Silicone 90: 1.0" Silicone 90° Elbow, Black
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 2.25" - Black
Pipe Reducer: Silicone Reducer, 1.625" to 1.375" - Black
T4 Turbo Flange: Stainless Steel Flange, T4 Turbo
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 180° Bend, 2.5"
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Black
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Black
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.75" - Black
Silicone 30: 2.0" Silicone 30° Elbow, Black
Bending Reducer: Silicone Reducer, 45° bend - 3.5" to 2.5" - Black
Stainless Steel UJ Bend: Mandrel Bent Stainless Steel 45/180 Bend, 1.5"
Liquid/Air: Water to Air Intercooler - 12"x12.25"x4.5" - O/S I/O (Type 4)
Silicone 60: 2.5" Silicone 60° Elbow, Black
Stainless Steel Piping: Mandrel Bent Stainless Steel 45/180 Bend, 2.5"
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Black
Water to Air Intercoolers: Water to Air Intercooler, 12.5"x12.25"x4.5", Thru I/O (Type 10)
Silicone 30: 2.25" Silicone 30° Elbow, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 90°Long
Stainless Steel : 2' Mandrel Bent Stainless Steel 180° Bend, 2.25"
90 Degree Black Hoses: 2.75" Silicone 90° Elbow, Black
T6 Turbo Divided Flange: Stainless Steel Divided Flange, T6 Turbo
Silicone 60: 4.0" Silicone 60° Elbow, Black
Silicone 60: 2.25" Silicone 60° Elbow, Black
Washable air filter media.: Air Filter with Splash Guard - Carbon Fiber, 3" inlet
Mandrel SS: 1' Mandrel Bent Stainless Steel 45° Bend, 3.0"
Silicone 45: 4.0" Silicone 45° Elbow, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 90°Short
Hump Hose Coupler: 3.5" Silicone Hump Hose, Blue
Silicone 135: 2.25" Silicone 135° Elbow, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 90°Long
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 2.0"
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.25"
Reducer Elbow: Silicone Reducer, 45° bend - 2.75" to 2.5" - Black
Heat Exchanger: Intercooler - 29"x6"x2.5" - 2.5" Inlet/Outlet (Type 7)
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 3.5" - Black
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 45° Bend, 2.5"
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 3.0"
Silicone 45: 1.5" Silicone 45° Elbow, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.75"
Stainless Steel Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.75"
Mandrel SS Thick: 2' Extra Thick Stainless Steel 45° Bend, 2.5"
T6 Turbo Flange: Stainless Steel Flange, T6 Turbo
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 45°Long
T-pipe: BOV T-Pipe with Greddy Type S Style Flange - 3.0"
Turbo Piping: Stainless Steel Joiner, 3.5"
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 112)
Water to Air Intercoolers: Water to Air Intercooler - 11"x9.5"x3.5" - Thru I/O (Type 16)
Pipe Reducer: Silicone Reducer, 3.75" to 3.0" - Black
Stainless Steel Piping: Mandrel Bent Aluminum 45/180 Bend, 2.5"
Mandrel SS Thick: 1' Extra Thick Stainless Steel 45° Bend, 2.5"
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Silver
Silicone Hose: 2.0" Silicone 2' Straight Hose, Blue
Silicone 45: 4.5" Silicone 45° Elbow, Black
Stainless Steel Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.75"
Silicone 60: 2.0" Silicone 60° Elbow, Black
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 180° Bend, 2.0"
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -12 AN Black, per ft.
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.0"
Silicone 90: 1.25" Silicone 90° Elbow, Black
Silicone 30: 2.75" Silicone 30° Elbow, Black
Silicone 45: 1.75" Silicone 45° Elbow, Black
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.0" - Black
Hose Coupler: 2.25" Silicone Hump Hose, Black
Reinforced Silicone Heater Hose: 0.875" Reinforced Silicone Heater Hose, Black (per foot)
Titanium Exhaust Heat Wrap: 2" X 50' Titanium Exhaust/Header Wrap
Pipe Reducer: Silicone Reducer, 4.5" to 3.5" - Black
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.5"
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.5"
Tube Reducer: Silicone Reducer, 2.75" to 2.0" - Black
Silicone 90: 4.0" Silicone 90° Elbow, Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 90°Short
T3 T3/T4 Turbo Divided Flange: Stainless Steel Divided Flange, T3 T3/T4 Turbo
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Blue
Titanium Turbo Blanket for T3: T3 Turbo Blanket - Titanium
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.75"
TurboXS Style BOV Flange: Universal Classic Style BOV - Silver (Type 11)
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T3, T3/T4 Merge Collector with Flange
Pipe Reducer: Silicone Reducer, 2.0" to 1.5" - Black
Engine Bay Heat Reducer: 2" X 100' Fiberglass Exhaust/Header Wrap, Black
Silicone 180: 2.75" Silicone 180° Elbow, Black
Silicone 45: 3.5" Silicone 45° Elbow, Red
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.75"
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 3.5"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 90°Short
: Compact Oil Drain Flange(Mitsubishi Style), -10AN
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Silver (Type 6)
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 3.0"
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 90°Long
HKS Style BOV Flange: Universal BOV with HKS Style Flange - Silver (Type 3)
Pipe Reducer: Silicone Reducer, 3.25" to 2.5" - Black
T3 T3/T4 Turbo Flange: Stainless Steel Flange, T3 T3/T4 Turbo
Silicone 30: 2.75" Silicone 30° Elbow, Blue
Silicone 180: 2.5" Silicone 180° Elbow, Blue
Tube Reducer: Silicone Reducer, 2.75" to 2.25" - Black
02 Sensor Plug Bolt: O2 Sensor Plug, M18x1.5
Silicone BOV T: Silicone T Pipe with 1" BOV Port - 2.5" Inlet/Outlet, black
Stainless Steel UJ Bend: Mandrel Bent Aluminum 45/180 Bend, 1.5"
Mandrel Bent Thick Stainless Steel Tubing: 2' Straight Extra Thick Stainless Steel Pipe, 2.25"
Aluminum One-Way Check Valve -6AN: Aluminum One-Way Check Valve, -6AN Silver
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 1' Straight
Bending Reducer: Silicone Reducer, 90° bend - 3.25" to 2.5" - Black
Turbo Coupler: 1.5" Silicone Hump Hose, Black
T-pipe: BOV T-Pipe with 2.0" V-Band Flange - 3.0"
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.0"
Silicone 30: 1.5" Silicone 30° Elbow, Black
Pipe Reducer: Silicone Reducer, 2.5" to 2.25" - Blue
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.5"
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.75"
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 3.5"
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Gold/Blue
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.0"
Silicone Boost/Vac Hose: 8mm Red Silicone Boost/Vacuum Hose Per Ft.
HKS Style BOV Flange: Universal BOV with NEW HKS Style Flange - Silver (Type 15)
Aluminum One-Way Check Valve 12mm Barbed : Aluminum One-Way Check Valve, 12mm Barbed Silver
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 45° Bend, 2.75"
Turbo Coupler: 2.0" Silicone Hump Hose, Blue
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 45° Bend, 2.0"
Stainless Steel Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.75"
Mandrel Bent SS: 1' Straight Stainless Steel Pipe, 2.5"
Tube Reducer: Silicone Reducer, 3.5" to 2.25" - Black
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 45° Bend, 2.25"
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Blue (Type 5)
Silicone 30: 4.5" Silicone 30° Elbow, Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 90°Long
Turbo Piping: Stainless Steel Joiner, 3.25"
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 3.5"
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 180° Bend, 2.25"
Red Hump Hose: 2.0" Silicone Hump Hose, Red
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Red
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Silver
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS T25/T28 Merge Collector
Worm Gear Clamps: Stainless Steel 3.75" Worm Gear Clamp (78-101mm)
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 3.5" - Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 90°Long
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 1.5"
Turbo Coupler: 4.5" Silicone Hump Hose, Black
Bending Reducer: Silicone Reducer, 45° bend - 3.25" to 2.5" - Black
3.5" Motorized exhaust bypass valve: AllFlow Electrically Controlled Exhaust Bypass Valve, 3.5"
Red Elbow: 2.0" Silicone 45° Elbow, Red
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 1' Straight
Heat Exchanger for Oil: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 105)
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 111)
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 90° Bend, 2.0"
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.625"
Water to air fittings: Brass 1/2" NPT Male to 1" Barbed 90 Elbow
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 45°Long
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Black
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 113)
2.0" Motorized exhaust cutout valve: AllFlow Electrically Controlled Exhaust Bypass Valve, 2.0"
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 90° Bend, 2.25"
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.625"
2.5" Electric exhaust cutout with Motor: AllFlow Electrically Controlled Exhaust Bypass Valve, 2.5"
3.0" Electric exhaust cutout / bypass valve: AllFlow Electrically Controlled Exhaust Bypass Valve, 3.0"
Silicone 135: 2.75" Silicone 135° Elbow, Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, Tee
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.0"
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 180° Bend, 2.0"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 180°Long
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 180° Bend, 1.5"
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Red
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.5" - Black
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.0" - Blue
Blitz Style BOV Flange: Universal BOV with Blitz Style Flange - Silver (Type 8)
Stainless Steel 45/180 bend: Mandrel Bent Stainless Steel 45/180 Bend, 1.625"
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.0"
Downpipe Gasket 3.0" GT series/T3 Turbo: Stainless Steel Gasket GT series/T3 Turbo Discharge, 3.0"
Pipe Reducer: Silicone Reducer, 2.0" to 1.25" - Black
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 3.5"
Stainless Steel 45/180 bend: Mandrel Bent Aluminum 45/180 Bend, 1.625"
Pipe Reducer: Silicone Reducer, 1.25" to 1.125" - Black
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 45° Bend, 2.0"
Silicone 30: 4.5" Silicone 30° Elbow, Blue
Reinforced Silicone Heater Hose: 0.875" Reinforced Silicone Heater Hose, Blue (per foot)
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 4.0" - Blue
Silicone 45: 4.5" Silicone 45° Elbow, Blue
Silicone 60: 1.25" Silicone 60° Elbow, Blue
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 45° Bend, 2.25"
Bending Reducer: Silicone Reducer, 45° bend - 3.25" to 2.5" - Blue
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 180° Bend, 1.5"
: AN Straight Union, -12 AN Silver
Turbo Coupler: 1.0" Silicone Hump Hose, Blue
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 135° Bend, 2.5"
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Blue
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 45° Bend, 2.0"
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 135° Bend, 2.0"
Pipe Reducer: Silicone Reducer, 3.5" to 2.25" - Blue
Pipe Reducer: Silicone Reducer, 2.75" to 2.0" - Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS to 1" NPS Reducer
Methanol Fuel Line: AN Female to Female Union, -10 AN Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 180°Long
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Silver
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Silver
: AN Nut, -4 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Blue
Carbon Fiber Hose: 3" Carbon Fiber 2' Straight Hose
4' Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 4' Long
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Black
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Silver
Carbon Fiber Hose: 2.5" Carbon Fiber 2' Straight Hose
V Band Clamp: 2.25" V-Band Clamp
Carbon Fiber Hose: 3.5" Carbon Fiber 2' Straight Hose
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Black
V Band Clamps: 2.25" Mild Steel V-Band Clamp Rings (Set of 2)
Prosport Water Temperature Digital Gauge: Prosport Water Temperature Gauge Digital Display-52mm
: AN to NPT Adaptor, -12 AN to 3/8" NPT Black
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Black
Exhaust Manifold Heat Wrap: 6" X 100' Fiberglass Exhaust/Header Wrap, Black
How to prevent header rust: 6" X 100' Fiberglass Exhaust/Header Wrap, Blue
Fiberglass Header Wrap: 6" X 100' Fiberglass Exhaust/Header Wrap, Tan
Carbon Fiber 90: 3" Carbon Fiber 90° Elbow
Prosport Wideband Air Fuel Ratio Digital Gauge: Prosport Wideband Air/Fuel Ratio w/Sensor Digital Display-52mm
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.0" - Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.5" - Black
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.0" - Black
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Black
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.5" to 2x 2.5" - Blue
Prosport IAT/Intake Air Temperature Digital Gauge: Prosport Intake Temperature Gauge Digital Display-52mm
Carbon Fiber 90: 2.5" Carbon Fiber 90° Elbow
Prosport Exhaust Gas Temperature Digital Gauge: Prosport Exhaust Gas Temperature Gauge Digital display-52mm
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Blue
Prosport Boost Digital Gauge: Prosport Boost Gauge Digital Display-52mm
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Blue
Header Wrap: 2" X 50' Double Thick Exhaust/Header Wrap, Black
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.5" to 2x 2.5" - Black
Prosport Digital Clock : Prosport Performance Series Digital Clock-52mm
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.5" - Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 2.5" to 2x 2.0" - Blue
: AN to NPT Adaptor, -10 AN to 3/8" NPT Black
Silicone Y Pipe Reducer: Silicone Y Reducer - 2.5" to 2x 2.0" - Black
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Black
Prosport Oil Temperature Digital Gauge: Prosport Oil Temperature Gauge Digital Display-52mm
Prosport Air Fuel Ratio Digital Gauge: Prosport Air/Fuel Ratio & Voltage Gauge Digital Display-52mm
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Blue
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Blue
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -4AN
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -6AN
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -8AN
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -10AN
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -12AN
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Black
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Blue
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Black
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Black
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Black
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Silver
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Blue
: AN to NPT Adaptor, -12 AN to 3/8" NPT Blue
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Black
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Black
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Black
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Silver
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Black
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Blue
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Black
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Black
: AN to Barbed Fitting Adaptor, -12 AN to 1" Black
: AN to Barbed Fitting Adaptor, -12 AN to 1" Blue
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Black
: AN to Barbed Fitting Adaptor, -12 AN to 1" Silver
: NPT to NPT Adapter, 1/2" NPT to 3/8" NPT Black
: NPT to NPT Adapter, 1/2" NPT to 3/8" NPT Blue
: AN to NPT Adaptor, -10 AN to 3/8" NPT Blue
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 2' Long, Blue (S&D)
Tube Reducer: Silicone Reducer, 3.5" to 2.5" - Black
: Stainless Steel Line Straight Adaptor, -4 AN Black
Turbo Coupler: 4.0" Silicone Hump Hose, Black
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 3.0"
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Black
Stainless Steel Brake Lines: PTFE Braided Stainless Steel Lines, -6 AN Black, per ft.
Silicone 60: 1.75" Silicone 60° Elbow, Black
Silicone 30: 3.0" Silicone 30° Elbow, Black
Tube Reducer: Silicone Reducer, 2.5" to 2.25" - Black
Silicone 30: 2.5" Silicone 30° Elbow, Black
Liquid to air fittings: Brass 1/2" NPT Male to 3/4" Barbed 90 Elbow
Worm Gear Clamps: Stainless Steel 0.375" Worm Gear Clamp (6-13mm)
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Black
90 degree blue hoses: 3.0" Silicone 90° Elbow, Blue
Silicone 60: 3.0" Silicone 60° Elbow, Black
Turbo Piping: Stainless Steel Joiner, 3.0"
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.75"
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Black
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.25" - Black
Reducer Elbow: Silicone Reducer, 45° bend - 4.0" to 3.5" - Black
Pipe Reducer: Silicone Reducer, 3.75" to 3.5" - Black
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2.25"
Silicone 90: 2.0" Silicone 90° Elbow, Blue
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Black
Mandrel SS: 1' Mandrel Bent Stainless Steel 90° Bend, 3.0"
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -10 AN, per ft.
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 4.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.25"
Reducer Elbow: Silicone Reducer, 90° bend - 2.25" to 2.0" - Black
Aluminum Pipe: 1' Straight Aluminum Pipe, 4.0"
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 45°Long
Silicone Boost/Vac Hose: 8mm Black Silicone Boost/Vacuum Hose Per Ft.
Mandrel SS Thick: 2' Extra Thick Stainless Steel 180° Bend, 2.5"
AN -8 Stainless Steel Hoses: PTFE Braided Stainless Steel Lines, -8 AN Black, per ft.
Intercooler Pump: Water to Air Intercooler Radiator Pump, Rule 401FC
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 4.0"
T Band Clamp: T-Bolt Clamp for 3.75" Silicone Parts
Silicone Hose: 2.0" Silicone 2' Straight Hose, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.0"
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 3.5"
Water to air fittings: Brass 1/2" NPT Male to 3/4" Barbed Straight
Silicone 30: 3.5" Silicone 30° Elbow, Black
Silicone 30: 4.0" Silicone 30° Elbow, Black
Band Clamp: T-Bolt Clamp for 3.25" Silicone Parts
Silicone Hose: 2.25" Silicone 2' Straight Hose, Black
Custom Aluminum V-Band Intake Flange: 3.5" Aluminum V-Band Clamp Rings (Set of 2)
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Black
Silicone Couplers: 5.0" Silicone Straight Coupler, Black
Silicone 90: 1.75" Silicone 90° Elbow, Black
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 2.5" - Black
AN -8 Stainless Steel Hoses: PTFE Braided Stainless Steel Lines, -8 AN, per ft.
Aluminum Pipe: 1' Straight Aluminum Pipe, 3.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.0"
Silicone 60: 3.0" Silicone 60° Elbow, Blue
Blue Couplers: 2.75" Silicone 2' Straight Hose, Blue
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 1.5"
Silicone Turbo Hoses: 1.5" Silicone Straight Coupler, Black
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Black
Pipe Reducer: Silicone Reducer, 1.625" to 1.5" - Black
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -10 AN Black, per ft.
Tube Reducer: Silicone Reducer, 3.0" to 2.0" - Black
Pipe Reducer: Silicone Reducer, 3.5" to 3.25" - Black
Silicone Hose: 3.5" Silicone 2' Straight Hose, Black
V Band Clamps: 4.0" V-Band Clamp
Pipe Reducer: Silicone Reducer, 5.0" to 4.5" - Black
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Black
Silicone Tubing: 3.0" Silicone 2' Straight Hose, Blue
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.75"
Silicone 180: 2.5" Silicone 180° Elbow, Black
Silicone Boost Vacuum Hose: 4mm Blue Silicone Boost/Vacuum Hose Per Ft.
V Band Clamps: 3.5" V-Band Clamp
Silicone Boost Vacuum Hose: 10mm Blue Silicone Boost/Vacuum Hose Per Ft.
T Bolt Hose Clamp: T-Bolt Clamp for 4.5" Silicone Parts
Custom Aluminum V-Band Intake Flange: 4.0" Aluminum V-Band Clamp Rings (Set of 2)
V Band Clamps: 2.5" Mild Steel V-Band Clamp Rings (Set of 2)
Smooth bore PTFE hose: PTFE Braided Stainless Steel Lines, -4 AN, per ft.
Silicone Hose: 2.5" Silicone 1' Straight Hose, Black
Pipe Reducer: Silicone Reducer, 3.0" to 2.5" - Blue
Pipe Reducer: Silicone Reducer, 2.0" to 1.75" - Black
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.25"
Black Hump Hose Couplers: 2.75" Silicone Hump Hose, Black
Mandrel Bent SS: 2' Straight Stainless Steel Pipe, 2.5"
Black Hump Hose: 2.0" Silicone Hump Hose, Black
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 108)
45 Degree Black Hoses: 2.75" Silicone 45° Elbow, Black
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 116)
Silicone Coupler: 3.0" Silicone Straight Coupler, Blue
Aluminum Pipe: 2' Straight Aluminum Pipe, 1.5"
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Black Silicone Hose: 2.75" Silicone 2' Straight Hose, Black
Pipe Reducer: Silicone Reducer, 3.25" to 3.0" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.75"
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 1.75" - Black
Silicone 90: 1.75" Silicone 90° Elbow, Blue
Reducer Elbow: Silicone Reducer, 90° bend - 2.25" to 2.0" - Blue
Silicone Hose: 2.5" Silicone 2' Straight Hose, Blue
Custom Aluminum V-Band Intake Flange: 3.0" Aluminum V-Band Clamp Rings (Set of 2)
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Black
T Bolt Hose Clamp: T-Bolt Clamp for 5.0" Silicone Parts
V Band Clamps: 4.0" Mild Steel V-Band Clamp Rings (Set of 2)
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.75"
Aftermarket Boost Vacuum Hose: 6mm Blue Silicone Boost/Vacuum Hose Per Ft.
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.0"
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.0"
Silicone Hose: 1.75" Silicone 2' Straight Hose, Black
Silicone Couplers: 4.0" Silicone Straight Coupler, Blue
Aluminum One-Way Check Valve 10mm Barbed : Aluminum One-Way Check Valve, 10mm Barbed Silver
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.5"
Stainless Steel Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.75"
Custom Aluminum V-Band Intake Flange: 2.5" Aluminum V-Band Clamp Rings (Set of 2)
Mandrel SS Thick: 1' Extra Thick Stainless Steel 90° Bend, 2.5"
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 1.5"
T4 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T4 Turbo
V Band Clamp: 2.0" V-Band Clamp
Mandrel SS Thick: 2' Straight Extra Thick Stainless Steel Pipe, 2.5"
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Silver
Turbo Piping: Stainless Steel Joiner, 2.75"
Reinforced Silicone Heater Hose: 0.625" Reinforced Silicone Heater Hose, Black (per foot)
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.25"
Silicone 60: 1.75" Silicone 60° Elbow, Blue
Silicone Hose: 2.0" Silicone 1' Straight Hose, Black
V Band Clamps: 4.0" Stainless Steel V-Band Clamp Rings (Set of 2)
K N Air Filter Alternative: Dual-Cone Air Filter - chrome, 3.5" inlet
2.5" air filter: Dual-Cone Air Filter - black, 2.5" inlet
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.25"
Silicone 60: 3.5" Silicone 60° Elbow, Black
Slim Electric Fan: 14" Radiator Fan with Mounting Kit
4.0" Black Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Black
Tube Reducer: Silicone Reducer, 2.25" to 2.0" - Black
Silicone Turbo Hoses: 2.25" Silicone Straight Coupler, Black
Silicone 180: 3.0" Silicone 180° Elbow, Black
Silicone 45: 3.0" Silicone 45° Elbow, Red
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Blue
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 1.5"
: T3/T4 Turbo Oil Drain Flange, -10AN
Silicone 45: 1.25" Silicone 45° Elbow, Black
Smooth bore PTFE hose: PTFE Braided Stainless Steel Lines, -4 AN Black, per ft.
Reinforced Silicone Heater Hose: 0.75" Reinforced Silicone Heater Hose, Black (per foot)
Silicone Hose: 4.0" Silicone 2' Straight Hose, Blue
Silicone Elbow: 2.25" Silicone 90° Elbow, Blue
T4 Turbo Divided Flange: Stainless Steel Divided Flange, T4 Turbo
Pipe Reducer: Silicone Reducer, 2.5" to 2.0" - Blue
Bending Reducer: Silicone Reducer, 90° bend - 3.5" to 2.5" - Black
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 3.0"
Pipe Reducer: Silicone Reducer, 1.75" to 1.5" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 1.5"
Silicone Tubing: 3.0" Silicone 1' Straight Hose, Blue
Silicone Hose: 2.5" Silicone 1' Straight Hose, Blue
V Band Clamps: 3.5" Stainless Steel V-Band Clamp Rings (Set of 2)
Hump Hose Coupler: 2.25" Silicone Hump Hose, Blue
Silicone Hose: 1.5" Silicone 2' Straight Hose, Black
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Silver
Silicone Hose: 1.5" Silicone 2' Straight Hose, Blue
Universal Air Filter: Dual-Cone Air Filter - black, 3" inlet
Mandrel Bent Stainless Steel Tubing: 2' Straight Stainless Steel Pipe, 2.75"
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 3.5" - Blue
Pipe Reducer: Silicone Reducer, 1.75" to 1.625" - Black
Silicone 45: 3.0" Silicone 45° Elbow, Blue
Silicone 90: 2.5" Silicone 90° Elbow, Red
Aluminized Thermal Wrap: 2" X 33' Aluminized Thermal Wrap for Intake Pipes
Silicone Hose: 1.0" Silicone 2' Straight Hose, Black
: Stainless Steel Line 45° Adaptor, -4 AN Black
Pipe Reducer: Silicone Reducer, 1.5" to 1.25" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 3.0"
Silicone 90: 1.625" Silicone 90° Elbow, Black
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Blue
Silicone 90: 3.0" Silicone 90° Elbow, Red
T-pipe: BOV T-Pipe with HKS SSQV Style Flange - 2.5"
Silicone Bend: 2.5" Silicone 45° Elbow, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 1' Straight
Coolant System and Head Gasket Pressure Test Valve: Coolant System and Head Gasket Pressure Test Valve
Silicone 30: 3.0" Silicone 30° Elbow, Blue
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 3' Long
Silicone 90: 4.5" Silicone 90° Elbow, Black
Silicone Turbo Hoses: 2.75" Silicone Straight Coupler, Black
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2"
T-pipe: BOV T-Pipe with Greddy Type S Style Flange - 2.5"
Worm Gear Clamps: Stainless Steel 1.25" Worm Gear Clamp (18-32mm)
Silicone Tubing: 3.5" Silicone 2' Straight Hose, Blue
Water to air adapters: Brass 3/4" NPT Male to 3/4" Barbed Straight
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 45°Long
Remote Radiator Filler Cap: Remote Radiator Inline Filler Cap - 1.5"
Aluminum Pipe: 1' Straight Aluminum Pipe, 1.5"
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 2' Long
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Black
Silicone 90: 1.25" Silicone 90° Elbow, Blue
Hump Hose Coupler: 3.0" Silicone Hump Hose, Blue
: Stainless Steel Line Straight Adaptor, -4 AN Silver
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.25"
Titanium Turbo Blanket for T4: T4 Turbo Blanket - Titanium
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 109)
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 4" Long
Pipe Reducer: Silicone Reducer, 2.0" to 1.75" - Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Black
Stainless Steel Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.75"
Pipe Reducer: Silicone Reducer, 2.0" to 1.5" - Blue
Silicone Boost Vacuum Hose: 4mm Red Silicone Boost/Vacuum Hose Per Ft.
Custom Intercooler Piping: Stainless Steel Joiner, 2.25"
Silicone Hose: 1.0" Silicone 2' Straight Hose, Blue
Custom Aluminum V-Band Intake Flange: 2.0" Aluminum V-Band Clamp Rings (Set of 2)
Water to Air Intercooler: Water to Air Intercooler DIY Kit 1200 HP
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Blue
Turbo Coupler: 1.75" Silicone Hump Hose, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.0"
High Temperature Water Hose: 1"(25mm) ID water hose, black (per foot)
90 degree blue hoses: 2.75" Silicone 90° Elbow, Blue
V Band Clamps: 2.0" Stainless Steel V-Band Clamp Rings (Set of 2)
90 degree blue hoses: 3.5" Silicone 90° Elbow, Blue
Aftermarket Boost Vacuum Hose: 6mm Red Silicone Boost/Vacuum Hose Per Ft.
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Silver
Silicone Turbo Hoses: 3.0" Silicone Straight Coupler, Red
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Red
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Black
Auto Air Filter: Dual-Cone Air Filter - chrome, 3" inlet
Pipe Reducer: Silicone Reducer, 1.625" to 1.25" - Black
Ultimate Drag Racing Water to Air Intercooler: Water to Air Ultimate Drag Kit
Silicone Boost Vacuum Hose: 10mm Red Silicone Boost/Vacuum Hose Per Ft.
Stainless Steel Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.75"
Mandrel SS: 1' Straight Stainless Steel Pipe, 3.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 1.5"
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Reinforced Silicone Heater Hose: 0.5" Reinforced Silicone Heater Hose, Black (per foot)
Aluminum One-Way Check Valve 8mm Barbed : Aluminum One-Way Check Valve, 8mm Barbed Silver
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 3.0"
Hose Coupler: 2.5" Silicone Hump Hose, Blue
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.0" - Black
Silicone 60: 2.75" Silicone 60° Elbow, Blue
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 4" Long
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Blue
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 2.5"
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Black
Silicone 30: 2.5" Silicone 30° Elbow, Blue
Fuel Pump Mounting Bracket: 2.5" Aluminum Water/Fuel Pump Mounting Bracket, Black
Mandrel SS: 2' Mandrel Bent Stainless Steel 135° Bend, 3.0"
Silicone Boost/Vac Hose: 8mm Blue Silicone Boost/Vacuum Hose Per Ft.
Pipe Reducer: Silicone Reducer, 4.0" to 3.25" - Black
Silicone 135: 2.0" Silicone 135° Elbow, Black
Pipe Reducer: Silicone Reducer, 1.5" to 1.375" - Black
Reducer Elbow: Silicone Reducer, 45° bend - 3.5" to 3.0" - Blue
Gasket for V-Band Assembly: Gasket for 3.0" Aluminum V-Band Assembly
V Band Clamps: 2.0" Mild Steel V-Band Clamp Rings (Set of 2)
Air Filter Material: Dual-Cone Air Filter - black, 3.5" inlet
Pipe Reducer: Silicone Reducer, 2.75" to 2.5" - Blue
Silicone 30: 4.0" Silicone 30° Elbow, Blue
Pipe Reducer: Silicone Reducer, 3.0" to 2.5" - Red
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Silver
Silicone Hose: 2.0" Silicone 1' Straight Hose, Blue
V Band Clamps: 3.5" Mild Steel V-Band Clamp Rings (Set of 2)
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Red/Blue
Exhaust wrap to minimize fatigue: 2" X 50' Fiberglass Exhaust/Header Wrap, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.25"
Reinforced Silicone Heater Hose: 0.75" Reinforced Silicone Heater Hose, Blue (per foot)
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Black
Pipe Reducer: Silicone Reducer, 3.25" to 2.25" - Black
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Black
02 Sensor Bung 45 Degree Cut Angled: Stainless Steel O2 Sensor Weld Bung, 45° cut, M18x1.5
Turbo Coupler: 2.5" Silicone Hump Hose, Red
45 degree blue hoses: 2.75" Silicone 45° Elbow, Blue
Pipe Reducer: Silicone Reducer, 4.5" to 4.0" - Blue
Silicone BOV T: Silicone T Pipe with 1.25" BOV Port - 2.5" Inlet/Outlet, black
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.25"
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 90° Bend, 2.75"
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Black
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.5" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.5"
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Silver
Valve Stem: Tire Valve Stem - Clamp Down Type
Silicone Hose: 4.5" Silicone 2' Straight Hose, Black
Pipe Reducer: Silicone Reducer, 3.0" to 2.0" - Blue
Silicone Hose: 1.25" Silicone 2' Straight Hose, Black
Silicone 30: 3.25" Silicone 30° Elbow, Black
Mandrel Bent Thick SS: 2' Straight Extra Thick Stainless Steel Pipe, 2.0"
Silicone Coupler: 2.0" Silicone Straight Coupler, Blue
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Red/Blue
Pipe Reducer: Silicone Reducer, 3.5" to 3.0" - Blue
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Black
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Blue
Mandrel SS Thick: 1' Extra Thick Stainless Steel 180° Bend, 2.5"
Silicone Turbo Hoses: 1.0" Silicone Straight Coupler, Black
Water to air fittings: 6AN brass ring
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 90°Long
Pipe Reducer: Silicone Reducer, 2.25" to 1.75" - Black
Silicone Hose: 1.625" Silicone 2' Straight Hose, Black
T-pipe: BOV HKS SSQV Style Flange with 1.25" Outlet
Silicone Turbo Hoses: 1.75" Silicone Straight Coupler, Black
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, Tee
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.5"
Stainless Steel Pipe: 2' Straight Stainless Steel Pipe, 1.5"
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 8" Long
: T3/T4 Turbo Oil Feed Flange, -4AN
Pipe Reducer: Silicone Reducer, 2.5" to 1.5" - Black
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.25"
Pipe Reducer: Silicone Reducer, 1.875" to 1.75" - Black
Silicone 180: 3.0" Silicone 180° Elbow, Blue
Mandrel SS: 1' Mandrel Bent Stainless Steel 180° Bend, 3.0"
Pipe Reducer: Silicone Reducer, 3.5" to 3.0" - Red
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Silver
Silicone 45: 1.0" Silicone 45° Elbow, Black
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Gold/Blue
Greddy Type RS Style BOV Flange: Universal BOV with Greddy Type RS Style Flange - Silver (Type 7)
Silicone Hose: 2.5" Silicone 2' Straight Hose, Red
Silicone Turbo Hoses: 3.25" Silicone Straight Coupler, Black
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2"
Silicone 45: 3.5" Silicone 45° Elbow, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2.0" NPS, 45°Long
T-pipe: BOV T-Pipe with 2.0" V-Band Flange - 2.5"
Silicone Coupler: 2.5" Silicone Straight Coupler, Blue
4.0" Silver Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Silver
Custom Aluminum V-Band Intake Flange: 2.75" Aluminum V-Band Clamp Rings (Set of 2)
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Gold/Blue
Stainless Steel : 2' Straight Stainless Steel Pipe, 2.25"
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Red/Blue
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Silver
Worm Gear Clamps: Stainless Steel 3.5" Worm Gear Clamp (72-95mm)
Pipe Reducer: Silicone Reducer, 3.25" to 3.0" - Blue
: Stainless Steel Line 90° Adaptor, -4 AN Silver
Water to Air Intercooler: Water to Air Intercooler DIY Kit 350 HP
Worm Gear Clamps: Stainless Steel 3" Worm Gear Clamp (54-82mm)
Methanol Fuel Line: AN Straight Union, -6 AN Black
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 4.0"
Stainless Steel Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.75"
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Blue
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Black
Water to Air Intercooler: Water to Air Intercooler DIY Kit 600 HP
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -10 AN Lines (5 Pack)
Stainless Steel Zip Ties: Stainless Steel Zip Tie/Cable Tie, 8"
Worm Gear Clamps: Stainless Steel 3.25" Worm Gear Clamp (65-89mm)
Turbo Coupler: 4.0" Silicone Hump Hose, Blue
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.5"
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.5"
Pipe Reducer: Silicone Reducer, 3.0" to 2.75" - Blue
Reinforced Silicone Heater Hose: 0.625" Reinforced Silicone Heater Hose, Blue (per foot)
How to prevent header rust: 1" X 50' Fiberglass Exhaust/Header Wrap, Black
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 45° Bend, 2.5"
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Red
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -6 AN Lines (5 Pack)
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Black
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Blue
Silicone 30: 1.75" Silicone 30° Elbow, Black
Silicone 135: 2.0" Silicone 135° Elbow, Blue
Silicone Turbo Hoses: 1.25" Silicone Straight Coupler, Black
3.0" GT series/T3 Turbo Flange: Stainless Steel Flange, 3.0" GT series/T3 Turbo Discharge
Silicone Turbo Hoses: 1.625" Silicone Straight Coupler, Black
Silicone Couplers: 4.5" Silicone Straight Coupler, Black
Water to air fittings: 8AN brass ring
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.5"
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Blue
Silicone Hose: 4.5" Silicone 2' Straight Hose, Blue
Silicone 45: 3.25" Silicone 45° Elbow, Black
Silicone 60: 2.0" Silicone 60° Elbow, Blue
Tube Reducer: Silicone Reducer, 2.75" to 2.5" - Red
Stainless Steel Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.75"
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Black
Silicone Hose: 1.75" Silicone 2' Straight Hose, Blue
Air Filter Media: Foam Style Air Filter - blue, 3" inlet
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Silver
Silicone 45: 2.5" Silicone 45° Elbow, Red
Carbon Air Filter: Air Filter with Splash Guard - Carbon Fiber, 2.5" inlet
Silicone Bend: 2.25" Silicone 45° Elbow, Blue
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 3.0"
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Black
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 8" Long
Pipe Reducer: Silicone Reducer, 2.0" to 1.625" - Black
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Blue
Pipe Reducer: Silicone Reducer, 2.25" to 1.5" - Black
Water to air fittings: 10AN brass ring
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Black
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 3.0" - Blue
Silicone 30: 1.25" Silicone 30° Elbow, Black
Stainless Steel Locking Ties: Stainless Steel Zip Tie/Cable Tie, 12"
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.0"
Water to air fittings: 4AN brass ring
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.625"
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 10" Long
Silicone 60: 1.5" Silicone 60° Elbow, Black
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Black
Reinforced Silicone Heater Hose: 1.0" Reinforced Silicone Heater Hose, Black (per foot)
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.75"
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.75"
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -8 AN Lines (5 Pack)
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 135° Bend, 2.25"
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Silver
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 4.0"
Pipe Reducer: Silicone Reducer, 1.75" to 1.0" - Black
Turbo Coupler: 3.0" Silicone Hump Hose, Red
Engine Coolant Adaptor: AN Tee, -6 AN Black
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 10" Long
3.0" Turbo Intake Aluminum Velocity Stack : 3.0" Aluminum Velocity Stack, Silver
Silicone 45: 2.0" Silicone 45° Elbow, Blue
Methanol Fuel Line: AN Female to Female Union, -6 AN Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 1' Straight
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 3.0"
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Blue
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 2.25" - Blue
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Blue
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Blue
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 4.0" - Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 3.5"
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Black
Stainless Steel Tube: 2' Straight Stainless Steel Pipe, 2.0"
Aftermarket Brake Lines: AN Plug, -6 AN Silver
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 4.0"
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Black
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 4.0"
Silicone Coupler: 2.75" Silicone Straight Coupler, Blue
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.5"
Pipe Reducer: Silicone Reducer, 1.5" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 3.25" to 2.75" - Black
Silicone Coupler: 2.25" Silicone Straight Coupler, Blue
AN Lines Pressure Tester: AN to NPT Female Adaptor, -6 AN to 1/8''-27 NPTF Silver
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.75" - Blue
Pipe Reducer: Silicone Reducer, 3.5" to 2.5" - Blue
Pipe Reducer: Silicone Reducer, 1.875" to 1.5" - Black
Fuel Pump Mounting Bracket: 2.0" Aluminum Water/Fuel Pump Mounting Bracket, Black
Silicone Turbo Hoses: 2.5" Silicone Straight Coupler, Red
Aluminum One-Way Check Valve 6mm Barbed : Aluminum One-Way Check Valve, 6mm Barbed Silver
Stainless Steel : 2' Mandrel Bent Stainless Steel 90° Bend, 2.25"
Reinforced Silicone Heater Hose: 1.0" Reinforced Silicone Heater Hose, Blue (per foot)
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 90° Bend, 2.0"
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -12 AN, per ft.
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 45° Bend, 1.5"
Silicone 60: 3.25" Silicone 60° Elbow, Black
V Band Clamps: 4.5" V-Band Clamp
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2.25"
Silicone 30: 3.5" Silicone 30° Elbow, Blue
Stainless Steel Pipe: 1' Straight Stainless Steel Pipe, 1.5"
Red Bend: 2.0" Silicone 90° Elbow, Red
Methanol Fuel Line: AN Straight Union, -10 AN Black
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Gold/Blue
Worm Gear Clamps: Stainless Steel 0.75" Worm Gear Clamp (13-23mm)
T-pipe: BOV T-Pipe with 1" BOV T - 2.5"
Pipe Reducer: Silicone Reducer, 1.75" to 1.25" - Black
Stainless Steel Pipe Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.5"
Air Filter Media: Foam Style Air Filter - blue, 2.5" inlet
Custom Aluminum V-Band Intake Flange: 1.5" Aluminum V-Band Clamp Rings (Set of 2)
Radiator Fan Transmission Oil Cooler Mounting Kit: Radiator Fan Mounting Kit
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 45° Bend, 1.5"
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Gold/Blue
X Crossover Exhaust Pipe: Stainless Steel Exhaust X Pipe, 2.5"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 2.5" V-Band Merge Collector with Flange
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Black
Worm Gear Clamps: Stainless Steel 5.5" Worm Gear Clamp (130-152mm)
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 90° Bend, 2.5"
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Red/Blue
Methanol Fuel Line: AN Straight Union, -8 AN Black
: Stainless Steel Line 90° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Silver
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 90° Bend, 2.0"
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.5"
Worm Gear Clamps: Stainless Steel 1.5" Worm Gear Clamp (21-44mm)
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.75"
Silicone 180: 2.0" Silicone 180° Elbow, Blue
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.25"
Worm Gear Clamps: Stainless Steel 2.25" Worm Gear Clamp (40-63mm)
Reducer Elbow: Silicone Reducer, 45° bend - 2.75" to 2.5" - Blue
Turbo Coupler: 3.25" Silicone Hump Hose, Black
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 90° Bend, 2.75"
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Red
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 2.5" - Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 4.0"
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Gold/Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 3.5"
Silicone T Pipe: Silicone T Pipe with 1.25" BOV Port - 2.5" Inlet/Outlet, blue
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS to 1.5" NPS Reducer
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Blue
Worm Gear Clamps: Stainless Steel 2.5" Worm Gear Clamp (46-70mm)
Worm Gear Clamps: Stainless Steel 2.75" Worm Gear Clamp (50-76mm)
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 45° Bend, 2.0"
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 103)
Silicone 30: 1.5" Silicone 30° Elbow, Blue
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Black
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Silver
Mandrel SS Thick: 1' Straight Extra Thick Stainless Steel Pipe, 2.5"
Pipe Reducer: Silicone Reducer, 2.25" to 2.0" - Blue
3.0" Turbo Intake Aluminum Velocity Stack : 3.0" Aluminum Velocity Stack, Black
Gasket for V-Band Assembly: Gasket for 4.0" Aluminum V-Band Assembly
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Black
Mandrel SS Thick: 1' Extra Thick Stainless Steel 135° Bend, 2.5"
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Red
Tube Reducer: Silicone Reducer, 2.5" to 2.0" - Red
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Silver
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.75"
Pipe Reducer: Silicone Reducer, 3.75" to 3.0" - Blue
Silicone 90: 1.0" Silicone 90° Elbow, Blue
Mandrel Bent Thick Stainless Steel Tubing: 1' Straight Extra Thick Stainless Steel Pipe, 2.25"
Silicone 30: 2.25" Silicone 30° Elbow, Blue
Pipe Reducer: Silicone Reducer, 3.75" to 3.5" - Blue
90 degree blue hoses: 3.25" Silicone 90° Elbow, Blue
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 4" Long
Silicone Connector: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Blue
Silicone Couplet: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Black
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.75"
Silicone Sleeve: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Red
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Red/Blue
Silicone 90: 3.5" Silicone 90° Elbow, Red
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.5"
Silicone 60: 4.5" Silicone 60° Elbow, Black
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Black
Water to air fittings: Brass 1/8" NPT Male to 6mm Barbed Straight
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS to 1.25" NPS Reducer
Worm Gear Clamps: Stainless Steel 4" Worm Gear Clamp (84-108mm)
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Red/Blue
45 Degree Red Hoses: 2.75" Silicone 45° Elbow, Red
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 3.0"
: Stainless Steel Line 45° Adaptor, -4 AN Silver
Silicone Boot: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Red
Pipe Reducer: Silicone Reducer, 2.0" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.375" - Black
Silicone Sleeve: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Black
Silicone Couplet: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 1' Straight
3.5" Silver Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.25"
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 1.75" - Blue
Silicone Couplers: 4.5" Silicone Straight Coupler, Blue
Worm Gear Clamps: Stainless Steel 2" Worm Gear Clamp (33-57mm)
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 2.5" - Black
Stainless Steel Tube Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.625"
Braided Stainless Steel Hose: AN Plug, -8 AN Silver
Reducer Elbow: Silicone Reducer, 45° bend - 4.0" to 3.5" - Blue
Gasket for V-Band Assembly: Gasket for 3.5" Aluminum V-Band Assembly
Water to air fittings: Brass 1/2" NPT Male to 1" Barbed Straight
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.0" - Blue
Silicone Boots: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Blue
Silicone Joint: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 1.5"
K & N Air Filter Alternative: Dual-Cone Air Filter - blue, 2.5" inlet
Silicone Connector: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Red
Pipe Reducer: Silicone Reducer, 2.75" to 1.75" - Blue
IAT Installation: Stainless Steel Joiner with Water Injection/Probe Taps, 2.5"
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.0"
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 180° Bend, 2.0"
Air Filter Media: Foam Style Air Filter - green, 3" inlet
Aftermarket Brake Lines: AN Plug, -6 AN Black
Pipe Reducer: Silicone Reducer, 3.5" to 2.75" - Blue
Replacement Air Filter: Dual-Cone Air Filter - chrome, 2.5" inlet
Pipe Reducer: Silicone Reducer, 3.75" to 3.25" - Black
3.5" air filter: Air Filter with Splash Guard - Carbon Fiber, 3.5" inlet
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.0" - Blue
Turbo Coupler: 1.25" Silicone Hump Hose, Black
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -4 AN Lines (5 Pack)
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Black
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Gold/Blue
Worm Gear Clamps: Stainless Steel 1" Worm Gear Clamp (14-27mm)
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Gold/Blue
Silicone 30: 1.0" Silicone 30° Elbow, Black
: AN Straight Union, -6 AN Silver
AN Lines Pressure Tester: AN to NPT Female Adaptor, -8 AN to 1/8''-27 NPTF Silver
Braided Stainless Steel Hose: AN Plug, -8 AN Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.0"
How to prevent header rust: 6" X 50' Fiberglass Exhaust/Header Wrap, Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.75"
Worm Gear Clamps: Stainless Steel 4.25" Worm Gear Clamp (91-114mm)
Silicone 60: 1.25" Silicone 60° Elbow, Black
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Black
Exhaust Manifold Heat Wrap: 6" X 50' Fiberglass Exhaust/Header Wrap, Black
Fiberglass Header Wrap: 6" X 50' Fiberglass Exhaust/Header Wrap, Tan
Stainless Steel Tube Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.625"
Stainless Steel Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.75"
Silicone Turbo Hoses: 2.75" Silicone Straight Coupler, Red
Silicone 180: 2.5" Silicone 180° Elbow, Red
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 1' Straight
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.5"
Silicone 90: 1.5" Silicone 90° Elbow, Blue
T4 Stainless Steel Turbo Divided Inlet Gasket: Stainless Steel Gasket, T4 Turbo (Divided)
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.25"
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Red/Blue
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Gold/Blue
Methanol Fuel Line: AN Female to Female Union, -8 AN Black
Pipe Reducer: Silicone Reducer, 1.75" to 1.5" - Blue
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 10" Long
3.5" Black Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.5"
Silicone 180: 2.0" Silicone 180° Elbow, Black
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 180° Bend, 2.5"
Silicone 90: 3.25" Silicone 90° Elbow, Black
Silicone 135: 2.75" Silicone 135° Elbow, Blue
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Red
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Black
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Blue
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Black
Silicone 180: 2.25" Silicone 180° Elbow, Black
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Red
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 90° Bend, 2.25"
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Silver
T3 T3/T4 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T3 T3/T4 Turbo
Methanol Fuel Line: AN Straight Union, -4 AN Black
Forge Style BOV Flange: Universal BOV with Easy Installation - Silver (Type 9)
Water Injection Tap: Stainless Steel Joiner with Water Injection/Probe Taps, 3.0"
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 3.0"
Pipe Reducer: Silicone Reducer, 3.0" to 2.25" - Blue
Air Filter Media: Foam Style Air Filter - green, 2.5" inlet
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T3, T3/T4 Merge Collector
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 2.5" V-Band Merge Collector
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 3.0" V-Band Merge Collector
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Red
Methanol Fuel Line: AN Female to Female Union, -10 AN Black
Silicone 135: 3.0" Silicone 135° Elbow, Blue
Silicone Turbo Hoses: 2.0" Silicone Straight Coupler, Red
: AN Female to Female Union, -4 AN Black
Worm Gear Clamps: Stainless Steel 1.75" Worm Gear Clamp (27-51mm)
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 1.5"
Silicone Turbo Hoses: 1.5" Silicone Straight Coupler, Blue
Pipe Reducer: Silicone Reducer, 3.25" to 2.5" - Blue
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 90° Bend, 1.5"
Clutch Fluid Line: AN Plug, -10 AN Black
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Silver
: AN Tee, -4 AN Black
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Black
Water to air fittings: Brass 1/8" NPT Male to 4mm Barbed Straight
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 1' Straight
Water to air fittings: Brass 1/2" NPT Male to 5/8" Barbed Straight
Silicone Hose: 3.0" Silicone 2' Straight Hose, Red
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.5"
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 3.5"
Silicone 60: 4.0" Silicone 60° Elbow, Blue
Turbo Coupler: 3.5" Silicone Hump Hose, Red
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.0"
Worm Gear Clamps: Stainless Steel 0.5" Worm Gear Clamp (6-16mm)
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Silver
Silicone Hose: 3.25" Silicone 2' Straight Hose, Black
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Silver
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.25"
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 3.5"
Water to Air Pump 0392022002: Water to Air Intercooler Pump and Harness, Bosch Cobra
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.25"
: Stainless Steel Line 180° Adaptor, -4 AN Silver
: AN Tee, -4 AN Silver
Mandrel SS: 1' Mandrel Bent Stainless Steel 135° Bend, 3.0"
Red Silicone Hose: 2.75" Silicone 2' Straight Hose, Red
1/2" NPT Full Port Brass Ball Valve: Brass 1/2" NPT Female to 1/2" NPT Male Full Port Ball Valve
: AN 45° Union, -10 AN Black
Stainless Steel Pipe Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.5"
Custom Aluminum V-Band Intake Flange: 2.25" Aluminum V-Band Clamp Rings (Set of 2)
Silicone Turbo Hoses: 1.75" Silicone Straight Coupler, Blue
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Black
Silicone Hose: 3.5" Silicone 2' Straight Hose, Red
Pipe Reducer: Silicone Reducer, 1.875" to 1.625" - Black
Water to air fittings: 12AN brass ring
Stainless Steel : 1' Straight Stainless Steel Pipe, 2.25"
Pipe Reducer: Silicone Reducer, 2.25" to 1.5" - Blue
T28 T28 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T25/T28 Turbo
Silicone Tubing: 3.25" Silicone 2' Straight Hose, Blue
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Silver
Pipe Reducer: Silicone Reducer, 2.5" to 1.5" - Blue
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Red
Pipe Reducer: Silicone Reducer, 2.5" to 2.25" - Red
Water to air installation kit: Water to Air Intercooler Installation Kit (1200HP)
Liquid to air installation kit: Water to Air Intercooler Installation Kit (350/600HP)
Blue hump hose: 2.75" Silicone Hump Hose, Blue
: Stainless Steel Line Straight Adaptor, -4 AN Red/Blue
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 180° Bend, 2.0"
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Black
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Blue
Electric exhaust cutout bypass motor: AllFlow Electrically Controlled Exhaust Bypass Valve Control Motor
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Red
Silicone Hose: 2.0" Silicone 2' Straight Hose, Red
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 1.5"
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.25" - Blue
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 180° Bend, 2.25"
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Red/Blue
Stainless Steel Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.75"
Header Wrap: 2" X 50' Fiberglass Exhaust/Header Wrap, Blue
Pipe Reducer: Silicone Reducer, 4.0" to 3.25" - Blue
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Red/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Black
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.625"
Silicone 45: 1.0" Silicone 45° Elbow, Blue
: NPT Plug, 1/2" NPT Silver
Pipe Reducer: Silicone Reducer, 4.0" to 3.75" - Blue
Exhaust Heat Wrap: 2" X 50' Fiberglass Exhaust/Header Wrap, Tan
Exhaust Heat Wrap: 1" X 50' Double Thick Exhaust/Header Wrap, White
Air Filter Media: Foam Style Air Filter - red, 2.5" inlet
: Stainless Steel Line 180° Adaptor, -4 AN Black
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Black
Stainless Steel : 1' Mandrel Bent Stainless Steel 90° Bend, 2.25"
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Red
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Black
Engine Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 102)
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Blue
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Silver
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -12 AN Lines (5 Pack)
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Blue
Silicone 45: 1.5" Silicone 45° Elbow, Blue
: AN Plug, -4 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Red/Blue
Stainless Steel Tube: 1' Straight Stainless Steel Pipe, 2.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.5"
Air Filter Media: Foam Style Air Filter - blue, 3.5" inlet
Heat Exchanger for Oil: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 110)
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.625"
Intercooler Piping: 2.25" Silicone 2' Straight Hose, Blue
Silicone Hose: 2.25" Silicone 2' Straight Hose, Red
: AN to NPT Adaptor, -10 AN to 3/8" NPT Silver
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 90° Bend, 1.5"
Silicone Elbow: 2.25" Silicone 90° Elbow, Red
Silicone 60: 2.5" Silicone 60° Elbow, Blue
Silicone Bend: 2.25" Silicone 45° Elbow, Red
Water to Air Coolers: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 104)
Silicone 180: 2.75" Silicone 180° Elbow, Blue
Silicone 60: 2.75" Silicone 60° Elbow, Black
Silicone Hose: 1.25" Silicone 2' Straight Hose, Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Black
Pipe Reducer: Silicone Reducer, 1.375" to 1.25" - Black
Pipe Reducer: Silicone Reducer, 1.5" to 1.125" - Black
HKS Style BOV Flange: Universal BOV with HKS Style Flange - Silver (Type 14)
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Black
: AN Straight Union, -8 AN Silver
: Stainless Steel Line 90° Adaptor, -4 AN Gold/Blue
Water to air fittings: Brass 1" NPT Male to 1-1/4" Barbed Straight
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Black
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Silver
T25/T28 Turbo Flange: Stainless Steel Flange, T25/T28 Turbo
Water to air fittings: Brass 1" NPT Male to 1" Barbed Straight
Silicone Couplers: 3.75" Silicone Straight Coupler, Black
Upgraded Brake Fluid Line: AN Tee, -10 AN Black
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 1' Long
Silicone 180: 3.0" Silicone 180° Elbow, Red
Aluminum One-Way Check Valve -4AN: Aluminum One-Way Check Valve, -4AN Silver
Water to air fittings: Brass 3/4" NPT Male to 1" Barbed Straight
Water to air fittings: Brass 3/4" NPT Male to 1" Barbed 90 Elbow
Mandrel Bent Stainless Steel Tubing: 1' Straight Stainless Steel Pipe, 2.75"
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Red (Type 4)
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 45°Long
Gasket for V-Band Assembly: Gasket for 2.5" Aluminum V-Band Assembly
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Silver
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Blue
Pipe Reducer: Silicone Reducer, 4.5" to 3.5" - Blue
AN Lines Pressure Tester: AN to NPT Female Adaptor, -10 AN to 1/8''-27 NPTF Silver
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.25"
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 90°Long
Water to air fittings: Brass 1/2" NPT Male to 1/2" Barbed Straight
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Red/Blue
Commercial Garden Hose: Industrial 3/4" garden hose kit (Per 10 Ft.)
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Silver
Turbo Coupler: 1.75" Silicone Hump Hose, Blue
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.75"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS T25/T28 Merge Collector with Flange
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Black
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 107)
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 106)
T-bolt clamp shop kit: Stainless Steel T-Bolt Clamp Shop Kit
Red Hump Hose: 2.25" Silicone Hump Hose, Red
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 90°Short
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Gold/Blue
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe Reducer, 3.0" to 2.5"
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 4.0"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T4 Merge Collector with Flange
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 3.0" V-Band Merge Collector with Flange
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 90°Short
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Black
Silicone 135: 2.5" Silicone 135° Elbow, Red
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 1.5"
Worm Gear Clamps: Stainless Steel 5" Worm Gear Clamp (118-140mm)
Header Wrap: 2" X 50' Double Thick Exhaust/Header Wrap, White
Clutch Fluid Line: AN Plug, -10 AN Silver
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.125"
Intake Pressure Tester: Intake Pressure Tester, 2.5" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.5" - Black
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Blue
Intake Pressure Tester: Intake Pressure Tester, 1.5" - Black
Intake Pressure Tester: Intake Pressure Tester, 1.5" - Blue
Intake Pressure Tester: Intake Pressure Tester, 1.75" - Black
Intake Pressure Tester: Intake Pressure Tester, 2.0" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.0" - Black
Intake Pressure Tester: Intake Pressure Tester, 1.75" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.25" - Black
Intake Pressure Tester: Intake Pressure Tester, 2.25" - Blue
: AN Plug, -4 AN Black
T3 T3/T4 Stainless Steel Turbo Divided Inlet Gasket: Stainless Steel Gasket, T3 T3/T4 Turbo (Divided)
Downpipe Gasket 2.5" GT series/T3 Turbo: Stainless Steel Gasket GT series/T3 Turbo Discharge, 2.5"
Intake Pressure Tester: Intake Pressure Tester, 2.75" - Black
Intake Pressure Tester: Intake Pressure Tester, 2.75" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.0" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.0" - Black
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.875"
Intake Pressure Tester: Intake Pressure Tester, 3.25" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.25" - Black
Methanol Fuel Line: AN Female to Female Union, -12 AN Black
Intake Pressure Tester: Intake Pressure Tester, 3.5" - Black
Intake Pressure Tester: Intake Pressure Tester, 3.5" - Blue
Air Filter Media: Foam Style Air Filter - red, 3.5" inlet
Intake Pressure Tester: Intake Pressure Tester, 4.0" - Blue
Intake Pressure Tester: Intake Pressure Tester, 4.0" - Black
Exhaust Heat Wrap: 1" X 50' Fiberglass Exhaust/Header Wrap, Blue
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Black
Silicone 135: 2.5" Silicone 135° Elbow, Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.25"
Reinforced Silicone Heater Hose: 0.5" Reinforced Silicone Heater Hose, Blue (per foot)
Air Filter Media: Foam Style Air Filter - red, 3" inlet
Worm Gear Clamps: Stainless Steel Worm Gear Clamp Shop Kit
Car Air Filter: Dual-Cone Air Filter - blue, 3" inlet
K and N Air Filter Alternative: Dual-Cone Air Filter - blue, 3.5" inlet
Silicone 180: 2.25" Silicone 180° Elbow, Blue
Upgraded Brake Fluid Line: AN Tee, -10 AN Silver
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Silver
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Blue
Water Injection: Stainless Steel Joiner with Water Injection/Probe Taps, 2.0"
: AN 45° Union, -6 AN Blue
Methanol Fuel Line: AN Straight Union, -12 AN Black
X Crossover Exhaust Pipe: Stainless Steel Exhaust X Pipe, 3.0"
: AN to NPT Adaptor, -12 AN to 3/8" NPT Silver
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T4 Merge Collector
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Black
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Red
Silicone 135: 3.0" Silicone 135° Elbow, Red
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Blue
2.5" GT series/T3 Turbo Flange: Stainless Steel Flange, 2.5" GT series/T3 Turbo Discharge
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.75"
WRX Style BOV Flange: Universal BOV with WRX Style Flange - Silver (Type 12)
TurboXS Style BOV Flange: Universal Beehive Style BOV - Silver (Type 13)
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 4.0"
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Red/Blue
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.875" - Black
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 90° Bend, 2.0"
4.0" Blue Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Blue
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Red/Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS to 1.5" NPS Reducer
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Red
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 135° Bend, 2.0"
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.25"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.5"
Silicone 60: 4.5" Silicone 60° Elbow, Blue
Pipe Reducer: Silicone Reducer, 2.75" to 2.25" - Blue
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Black
Methanol Fuel Line: AN Female to Female Union, -6 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Black
: AN Nut, -6 AN Black
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Red
EVO 8 T-Bolt Clamps: SaytheB EVO 10 T-Bolt Clamp Kit
Braided Stainless Steel Hose: AN Plug, -8 AN Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Silver
AN Lines Pressure Tester: AN to NPT Female Adaptor, -4 AN to 1/8''-27 NPTF Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Gold/Blue
Silicone 60: 1.0" Silicone 60° Elbow, Black
Silicone T Pipe: Silicone T Pipe with 1" BOV Port - 2.5" Inlet/Outlet, blue
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Red
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.5" - Blue
Reducer Elbow: Silicone Reducer, 45° bend - 2.25" to 2.0" - Blue
Silicone 90: 4.5" Silicone 90° Elbow, Blue
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 8" Long
Water to air fittings: Brass 1/4" NPT Male to 4mm Barbed Straight
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Red
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 3.5" - Blue
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.25"
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Blue
Liquid to air adapters: Brass 3/4" Barbed to 3/4" Barbed Straight
EVO 8 T-Bolt Clamps: Cajun Power EVO 7, 8, 9 T-Bolt Clamp Kit
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Red/Blue
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.5"
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 135° Bend, 2.0"
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.625"
Silicone 30: 3.25" Silicone 30° Elbow, Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Gold/Blue
Silicone Turbo Hoses: 2.25" Silicone Straight Coupler, Red
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Silver
: AN Bulkhead Adaptor, -6 AN Black
Silicone 45: 1.75" Silicone 45° Elbow, Blue
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.5" - Blue
Silicone 60: 3.5" Silicone 60° Elbow, Blue
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.0" - Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Silver
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 180° Bend, 2.75"
Silicone 60: 2.25" Silicone 60° Elbow, Blue
Silicone 30: 1.0" Silicone 30° Elbow, Blue
Silicnoe 60: 1.0" Silicone 60° Elbow, Blue
Bending Reducer: Silicone Reducer, 45° bend - 3.5" to 2.5" - Blue
Silicone 45: 1.625" Silicone 45° Elbow, Black
: AN Female to Female Union, -4 AN Blue
Silicone 30: 1.25" Silicone 30° Elbow, Blue
Silicone 45: 1.25" Silicone 45° Elbow, Blue
Silicone 135: 2.25" Silicone 135° Elbow, Blue
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.375"
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Blue
Silicone 60: 1.5" Silicone 60° Elbow, Blue
Silicone 30: 1.625" Silicone 30° Elbow, Blue
Silicone 60: 1.625" Silicone 60° Elbow, Blue
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Silver
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Blue
Silicone 30: 1.75" Silicone 30° Elbow, Blue
Mandrel SS Thick: 2' Extra Thick Stainless Steel 135° Bend, 2.5"
Silicone 60: 3.25" Silicone 60° Elbow, Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Blue
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 3.5"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 3.0"
Silicone 45: 3.25" Silicone 45° Elbow, Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Blue
Silicone 30: 2.0" Silicone 30° Elbow, Blue
90 Degree Red Hoses: 2.75" Silicone 90° Elbow, Red
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 135° Bend, 2.75"
: NPT Plug, 1/8" NPT Silver
Stainless Steel : 2' Mandrel Bent Stainless Steel 45° Bend, 2.25"
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Silver
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.0"
Bending Reducer: Silicone Reducer, 90° bend - 3.5" to 2.5" - Blue
Silicone 30: 1.625" Silicone 30° Elbow, Black
Silicone 60: 1.625" Silicone 60° Elbow, Black
Bending Reducer: Silicone Reducer, 90° bend - 3.25" to 2.5" - Blue
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 135° Bend, 1.5"
: AN Nut, -6 AN Blue
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 45°Long
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Black
: AN 45° Union, -6 AN Black
Engine Antifreeze Adaptor: AN Tee, -8 AN Blue
Hump Hose Coupler: 3.25" Silicone Hump Hose, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, Tee
: AN Nut, -10 AN Blue
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2.5" NPS to 1.5" NPS Reducer
: NPT Plug, 3/8" NPT Black
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 135° Bend, 2.0"
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Silver
: Stainless Steel Line Straight Adaptor, -4 AN Gold/Blue
Turbo Coupler: 1.5" Silicone Hump Hose, Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Silver
Worm Gear Clamps: Stainless Steel 4.5" Worm Gear Clamp (95-120mm)
: AN Bulkhead Adaptor, -10 AN Blue
Turbo Coupler: 1.625" Silicone Hump Hose, Black
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 45° Bend, 2.75"
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Silver
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 2.5" - Blue
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe, 2.5"
Fiberglass Header Wrap: 2" X 100' Fiberglass Exhaust/Header Wrap, Blue
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 180°Long
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, Tee
Stainless Steel : 2' Mandrel Bent Stainless Steel 135° Bend, 2.25"
: NPT Plug, 1/2" NPT Black
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Red/Blue
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe, 3.0"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2.5" NPS to 1.5" NPS Reducer
: AN Plug, -4 AN Blue
Turbo Coupler: 1.0" Silicone Hump Hose, Black
Turbo Coupler: 1.25" Silicone Hump Hose, Blue
: AN 90° Union,-4 AN to -4 AN Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, Tee
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Silver
Silicone Turbo Hoses: 3.25" Silicone Straight Coupler, Blue
Turbo Coupler: 4.5" Silicone Hump Hose, Blue
Methanol Fuel Line: AN Female to Female Union, -6 AN Blue
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe Reducer, 2.5" to 2.25"
Header Wrap: 2" X 100' Fiberglass Exhaust/Header Wrap, Tan
Tube Reducer: Silicone Reducer, 3.0" to 2.75" - Red
Mandrel Bent Thick SS: 1' Straight Extra Thick Stainless Steel Pipe, 2.0"
Red Hump Hose Couplers: 2.75" Silicone Hump Hose, Red
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, Tee
Pipe Reducer: Silicone Reducer, 3.25" to 2.25" - Blue
Exhaust Manifold Heat Wrap: 1" X 50' Fiberglass Exhaust/Header Wrap, Tan
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Blue
Air Filter Media: Foam Style Air Filter - green, 3.5" inlet
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.625"
Stainless Steel : 1' Mandrel Bent Stainless Steel 180° Bend, 2.25"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, Tee
Pipe Reducer: Silicone Reducer, 3.5" to 3.25" - Blue
: AN Nut, -6 AN Silver
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Black
Stainless Steel : 1' Mandrel Bent Stainless Steel 45° Bend, 2.25"
Methanol Fuel Line: AN Straight Union, -12 AN Blue
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.5"
: NPT Plug, 1/4" NPT Silver
Methanol Fuel Line: AN Female to Female Union, -8 AN Silver
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 135° Bend, 2.25"
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Blue
Gasket for V-Band Assembly: Gasket for 2.25" Aluminum V-Band Assembly
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Silver
Water to air fittings: Brass 1/8" NPT Male to 3/8" Barbed Straight
: AN Tee, -4 AN Blue
Water to air fittings: Brass 3/8" NPT Male to 3/8" Barbed Straight
Water to air fittings: Brass 3/8" NPT Male to 8mm Barbed Straight
Pipe Reducer: Silicone Reducer, 3.25" to 2.75" - Blue
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, Tee
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.625"
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Silver
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 135° Bend, 2.5"
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 135° Bend, 2.75"
Stainless Steel : 1' Mandrel Bent Stainless Steel 135° Bend, 2.25"
: AN Straight Union, -4 AN Silver
: AN Bulkhead Adaptor, -10 AN Black
Pipe Reducer: Silicone Reducer, 3.75" to 2.75" - Black
Pipe Reducer: Silicone Reducer, 3.75" to 2.75" - Blue
Pipe Reducer: Silicone Reducer, 1.75" to 1.375" - Black
Pipe Reducer: Silicone Reducer, 1.625" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 3.75" to 3.25" - Blue
Pipe Reducer: Silicone Reducer, 1.625" to 1.0" - Black
3.5" Blue Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 180°Long
Pipe Reducer: Silicone Reducer, 2.0" to 1.125" - Black
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Black
3.0" Blue Turbo Intake Aluminum Velocity Stack: 3.0" Aluminum Velocity Stack, Blue
Pipe Reducer: Silicone Reducer, 2.25" to 1.75" - Blue
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 135° Bend, 1.5"
Tube Reducer: Silicone Reducer, 2.25" to 2.0" - Red
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.25"
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 180° Bend, 2.75"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 180°Long
Methanol Fuel Line: AN Straight Union, -6 AN Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Black
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Red/Blue
Coolant System and Head Gasket Pressure Test Valve: Standard 1-1/4" tire valve for 0.453" rim hole (TR413)
Methanol Fuel Line: AN Female to Female Union, -12 AN Blue
Gasket for V-Band Assembly: Gasket for 2.75" Aluminum V-Band Assembly
: AN Female to Female Union, -4 AN Silver
Pipe Reducer: Silicone Reducer, 1.375" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 1.25" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 1.125" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 1.75" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 1.375" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.375" - Black
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Gold/Blue
Pipe Reducer: Silicone Reducer, 1.875" to 1.25" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.125" - Black
Gasket for V-Band Assembly: Gasket for 2.0" Aluminum V-Band Assembly
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Silver
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Red/Blue
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Gold/Blue
: AN Bulkhead Adaptor, -6 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Silver
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Silver
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Red/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Red/Blue
Silicone Couplers: 3.75" Silicone Straight Coupler, Blue
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Blue
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Silver
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Red/Blue
: AN Nut, -4 AN Black
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 4.5"
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Gold/Blue
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Red/Blue
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Red/Blue
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.75"
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Red/Blue
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Silver
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Gold/Blue
: AN Bulkhead Adaptor, -8 AN Black
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Red/Blue
: Stainless Steel Line 45° Adaptor, -4 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Red/Blue
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Silver
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 180°Long
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS to 1.25" NPS Reducer
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 180°Long
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Black
AN Lines Pressure Tester: AN to NPT Female Adaptor, -12 AN to 1/8''-27 NPTF Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Gold/Blue
Engine Antifreeze Adaptor: AN Tee, -8 AN Black
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.625"
: AN Nut, -10 AN Black
Water to air fittings: Brass 1/4" NPT Male to 6mm Barbed Straight
Water to air fittings: Brass 3/8" NPT Male to 4mm Barbed Straight
Water to air fittings: Brass 3/8" NPT Male to 10mm Barbed Straight
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Gold/Blue
: Stainless Steel Line 45° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Gold/Blue
Methanol Fuel Line: AN Straight Union, -4 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Black
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Blue
Upgraded Brake Fluid Line: AN Tee, -10 AN Blue
Engine Coolant Adaptor: AN Tee, -6 AN Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Silver
Engine Antifreeze Adaptor: AN Tee, -8 AN Silver
Air to water adapters: Brass 3/4" NPS Female to 3/4" Barbed Straight Swivel
: AN Plug, -12 AN Silver
: AN Plug, -12 AN Black
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Silver
Air to water fittings: Brass 3/4" NPS Male to 3/4" Barbed Straight
: Stainless Steel Line 180° Adaptor, -4 AN Gold/Blue
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Blue
: Stainless Steel Line 180° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Gold/Blue
Water Pump Mounting Bracket: 2.0" Pump Mounting Kit
Bosch 044 Fuel Pump Mounting Bracket: 2.25" Pump Mounting Kit
Engine Coolant Adaptor: AN Tee, -6 AN Silver
Fuel Pump Mounting Bracket: 2.5" Pump Mounting Kit
Oil Pump Mounting Bracket: 2.75" Pump Mounting Kit
Methanol Fuel Line: AN Straight Union, -8 AN Blue
Automotive Pump Mounting Bracket: 3.0" Pump Mounting Kit
Water Pump Mounting Bracket: 3.25" Pump Mounting Kit
: AN Tee, -12 AN Silver
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS to 1" NPS Reducer
Fuel Pump Mounting Bracket: 3.5" Pump Mounting Kit
Oil Pump Mounting Bracket: 3.75" Pump Mounting Kit
: AN Tee, -12 AN Blue
: AN Tee, -12 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Blue
Automotive Pump Mounting Bracket: 4.0" Pump Mounting Kit
Water Pump Mounting Bracket: 4.25" Pump Mounting Kit
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 90°Long
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Silver
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Blue
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Silver
Fuel Pump Mounting Bracket: 4.75" Pump Mounting Kit
Oil Pump Mounting Bracket: 5.25" Pump Mounting Kit
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 1' Straight
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Silver
: AN Straight Union, -10 AN Silver
Methanol Fuel Line: AN Straight Union, -10 AN Blue
: AN Bulkhead Adaptor, -6 AN Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS to 1.25" NPS Reducer
Methanol Fuel Line: AN Female to Female Union, -8 AN Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 90°Short
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Silver
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 45°Long
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Blue
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS to 1.25" NPS Reducer
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Blue
: AN 45° Union, -12 AN Blue
Silicone Turbo Hoses: 1.0" Silicone Straight Coupler, Blue
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Blue
Silicone Turbo Hoses: 1.25" Silicone Straight Coupler, Blue
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Silver
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 90°Short
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Silver
: AN 90° Union,-12 AN to -12 AN Silver
: AN 90° Union,-12 AN to -12 AN Black
: AN 45° Union, -12 AN Silver
: AN 90° Union,-12 AN to -12 AN Blue
: AN 45° Union, -12 AN Black
: AN Female to Female Union, -12 AN Silver
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Silver
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Silver
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Blue
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Silver
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Silver
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Black
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Gold/Blue
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Silver
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Silver
: AN Bulkhead Adaptor, -8 AN Silver
: AN Bulkhead Adaptor, -8 AN Blue
: NPT Plug, 1/8" NPT Black
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Blue
Water to air fittings: Brass 1/8" NPT Male to 8mm Barbed Straight
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Silver
: AN Nut, -4 AN Silver
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Blue
: NPT Plug, 1/4" NPT Blue
: AN Nut, -8 AN Blue
: NPT Plug, 1/4" NPT Black
: AN Nut, -8 AN Black
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Silver
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Silver
Methanol Fuel Line: AN Female to Female Union, -10 AN Silver
Water to air fittings: Brass 1/4" NPT Male to 8mm Barbed Straight
: NPT Plug, 3/8" NPT Silver
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 4.0"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.75"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 3.5"
Water to air fittings: Brass 3/8" NPT Male to 6mm Barbed Straight
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 5.0"
: AN 45° Union, -10 AN Silver
Aftermarket Brake Lines: AN Plug, -6 AN Blue
: NPT Plug, 1/8" NPT Blue
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Blue
: AN Nut, -12 AN Blue
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Silver
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Silver
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Black
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Silver
1/8"-27 NPT Male to 5/16"-32 NPT Female Adaptor: Brass 1/8"-27 NPT Male to 5/16"-32 NPT Female Adaptor
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Blue
: AN 45° Union, -6 AN Silver
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 180°Long
: AN Nut, -8 AN Silver
: AN Bulkhead Adaptor, -4 AN Silver
: AN Nut, -10 AN Silver
Clutch Fluid Line: AN Plug, -10 AN Blue
: NPT Plug, 3/8" NPT Blue
Water to air fittings: Brass 1/4" NPT Male to 3/8" Barbed Straight
: AN 90° Union,-4 AN to -4 AN Blue
: AN 45° Union, -4 AN Black
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Silver
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Silver
: AN 45° Union, -10 AN Blue
Liquid Air Adapter: Water I/O 90° 5/8" Adapter for Water to Air Intercoolers
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Silver
: AN Nut, -12 AN Silver
: AN Bulkhead Adaptor, -10 AN Silver
: AN Nut, -12 AN Black
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Blue
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Silver
: AN Plug, -12 AN Blue
: NPT Plug, 1/2" NPT Blue
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Silver
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Blue
Aluminum One-Way Check Valve -3AN: Aluminum One-Way Check Valve, -3AN Silver
: AN Bulkhead Adaptor, -4 AN Blue
: AN Bulkhead Adaptor, -4 AN Black
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Silver
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Silver
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Silver
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Black
: AN 90° Union,-4 AN to -4 AN Silver
: AN 45° Union, -4 AN Blue
: AN 45° Union, -4 AN Silver
: AN Bulkhead Adaptor, -12 AN Blue
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Silver
: AN 45° Union, -8 AN Silver
: AN 45° Union, -8 AN Blue
: AN 45° Union, -8 AN Black
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Blue
: AN Bulkhead Adaptor, -12 AN Silver
: NPT Plug, 3/4" NPT Blue
: AN Bulkhead Adaptor, -12 AN Black
: NPT Plug, 3/4" NPT Silver
: NPT Plug, 3/4" NPT Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Silver
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Blue
Worm Gear Clamps: Stainless Steel 6.5" Worm Gear Clamp (155-178mm)
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Black
Coolant System and Head Gasket Pressure Test Valve: Chrome 1-1/4" tire valve for 0.453" rim hole (TR413-C)
Gasket for V-Band Assembly: Gasket for 1.5" Aluminum V-Band Assembly
Worm Gear Clamps: Stainless Steel 4.75" Worm Gear Clamp (103-127mm)
Coolant System and Head Gasket Pressure Test Valve: Standard 1-1/2" tire valve for 0.453" rim hole (TR414)
Worm Gear Clamps: Stainless Steel 6" Worm Gear Clamp (143-165mm)
Coolant System and Head Gasket Pressure Test Valve: Chrome 1-1/2" tire valve for 0.453" rim hole (TR414-C)