Air to Water Intercooler Special Pages Index

This is for internet marketing purposes and might not be very useful!

Contact Us Through Facebook: Nope: Get your Auto Parts with few civil rights violations.

Privacy Policy
Shipping Policy
Secure Shopping
Safe Shopping Guarantee
Scammers and Phishing Attempts: Avoid Scammers and Phishing Attempts
Intercooler Pipe Fabrication, AN Fittings and Stainless Steel Lines, Water/Air, and Aluminum Pipes: Intercooler Pipe Fabrication, AN Fittings and Stainless Steel Lines, Water/Air, and Aluminum Pipes
Which to choose: Aluminum or Stainless Steel?: Aluminum or Stainless Steel - What
AN Fittings and Stainless Steel Lines: What size are they, really?: AN Fittings and Stainless Steel Lines: What size are they, really?
New Website for AN Fittings: AN Fittings For Sale Here!
BOV Myths and Adjustment: Read before installing your aftermarket BOV!
How shipping is calculated: Calculate Turbo Parts Shipping Cost right here.
About phone orders: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Intercooler End Tank Modification
Engine Cooling System
Why You Need to Run Ethanol / E85 Right Now: Why You Need to Run Ethanol / E85 Right Now
FAQ about our service: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
FAQ: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Page about our shipping methods.: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.

Our Forza 2 Sponsorships: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About our new website: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Career Oppertunities: Help us design the next Charge Air Cooler!
Aluminum Pipes, Stainless Steel Pipes, and Exhaust Parts: Aluminum Pipes, Stainless Steel Pipes, and Exhaust Parts - you want them? we got them.
AN Fittings and Stainless Steel Lines: AN Fittings and Stainless Steel Lines
Text from our Homepage: Air to Water Intercooler and more! WWW.FROZENBOOST.COM
Text from our Homepage: Your source for Intercooler Pipe Fabrication Parts
Our In Stock Guarantee: Silicone Parts Always In Stock!
Intercooler hoses business: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Making a Silicone Intake: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Largest shipper in Fountain CO: Trying to build your own DIY Cold Air Intake? Look no farther.
Portable garages and engine treatment: Portable garages and engine treatment
Picking up in Colorado Springs: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Our Low Price Guarantee: Shop Here for the Lowest Price on Silicone Couplers!

New business hours: Silicon parts and more at www.siliconeintakes.com.
Aluminum Intake Piping Fitment Guide: AluAluminum Intake Piping Fitment Guide
Enter the Pre-Intercooler Cooling Pipe: Enter the Pre-Intercooler Cooling Pipe
PTFE / Teflon - The Right Way To Go: PTFE / Teflon Stainless Steel Lines - The Right Way To Go
Removal Links for UK: Removal Links for UK
Stickers currently available: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Stickers Coming Soon: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Post Office Reliability: Check here for reinforced silicone couplers.
Our return policy: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About our Secure Shopping Guarantee: Our Secure Shopping Guarantee is simple and effective.
Benefits of a Silicone Intake: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Changes to some of our policies: We have the silicone boot you are looking for.
Our new shipping rates: Get your silicone couplet here.
Using our shopping cart: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About Silicone Intake Components: Silicon intake parts are very effective.
How to get a sponsorship for your car: How to get a sponsorship for your car
Shipping Updates: Check here for Turbocharger Parts - installation and upgrades
EBay, VeRO, and how it damages the consumer: EBay, VeRO, and how it damages the consumer
Benefits of Water to Air: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
FAQ about water/air intercooling: Buy your Water to Air Heat Exchanger here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.

Air to Water Intercooler Categories Index

This is for internet marketing purposes and might not be very useful!

Liquid Air Intercooler: Liquid Air Intercooler
Air/Water IC: Air/Water IC
Water to Air Heat Exchanger: Water to Air Heat Exchanger
Liquid Air Adapter: Liquid Air Adapter
Front Mount Intercooler: Front Mount Intercooler
Stainless Steel Teflon Fuel Lines: Stainless Steel Teflon Fuel Lines
Aluminum Pipes: Aluminum Pipes
High Performance Red Air Filters: High Performance Red Air Filters
T Bolt Clamp: T Bolt Clamp
Intake Pipe Reducer: Intake Pipe Reducer
30 Silicone Bends: 30 Silicone Bends
Turbocharger Part: Turbocharger Part
60 Silicone Bends: 60 Silicone Bends
Holset Turbocharger: Holset Turbocharger
135 Degree Bends: 135 Degree Bends
180 Silicone Bends: 180 Silicone Bends
Hump Hose: Hump Hose
Silicone Hose: Silicone Hose
Bending Reducer: Bending Reducer
Intake Leak Pressure Tester: Intake Leak Pressure Tester
Turbo Piping: Turbo Piping
DSM Intercooler Piping: DSM Intercooler Piping
BOV: BOV
Prosport Digital Gauges: Prosport Digital Gauges

Air to Water Intercooler Products Index

This is for internet marketing purposes and might not be very useful!

150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 17x12.25x9, S/S I/O (Type 53)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 20.25x15.5x12 S/S I/O (Type 54)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 16x12.5x4.5, S/S I/O (Type 52)
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Black
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 12x12.25x4.5, S/S I/O (Type 51)
Carbon Fiber Hose: 2.5" Carbon Fiber 2' Straight Hose
Carbon Fiber 90: 3" Carbon Fiber 90° Elbow
Carbon Fiber 45: 2.5" Carbon Fiber 45° Elbow
Carbon Fiber Hose: 3" Carbon Fiber 2' Straight Hose
Prosport IAT/Intake Air Temperature Digital Gauge: Prosport Dual Intercooler Air Temperature Gauge Digital Display-52mm
Prosport Oil Pressure Digital Gauge: Prosport Oil Pressure Gauge Digital Display-52mm
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 11"x9"x3.5" - S/S I/O (Type 50)
Carbon Fiber 45: 3" Carbon Fiber 45° Elbow
Carbon Fiber 90: 3.5" Carbon Fiber 90° Elbow
Carbon Fiber 45: 3.5" Carbon Fiber 45° Elbow
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Black
Prosport Boost Digital Gauge: Prosport Boost Gauge Digital Display-52mm
Prosport IAT/Intake Air Temperature Digital Gauge: Prosport Intake Temperature Gauge Digital Display-52mm
Stainless Steel Exhaust Gasket: Stainless Steel Gasket, 5-bolt
Prosport Volt Digital Gauge: Prosport Volt Gauge Digital Display-52mm
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Blue
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.0" - Black
Silicone 90: 3.0" Silicone 90° Elbow, Black
Long Flow Style Water to Air Intercooler: Water to Air Intercooler, 13.5"x4"x3.5", Long Flow (Type 20)
V Band Exhaust Clamp: 3.0" V-Band Clamp
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 4.0" - Black
Silicone 90: 2.5" Silicone 90° Elbow, Black
Silicone 45: 3.0" Silicone 45° Elbow, Black
Silicone 180: 2.75" Silicone 180° Elbow, Black
Silicone 45: 2.5" Silicone 45° Elbow, Black
Air to Water Heat Exchanger: Water to Air Intercooler Radiator - 26x7x3.5 (Type 101)
Hose Clamp: T-Bolt Clamp for 2.5" Silicone Parts
Silicone 45: 4.0" Silicone 45° Elbow, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 3.0"
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", S/S I/O (Type 12)
Silicone 135: 3.0" Silicone 135° Elbow, Black
T Band Clamp: T-Bolt Clamp for 3.0" Silicone Parts
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 3.0"
Black Bend: 2.0" Silicone 90° Elbow, Black
Air to Water Radiator: Water to Air Intercooler Radiator - 26x7x2 (Type 118)
Liquid to Air: Water to Air Intercooler - 16"x12.5"x4.5" - S/S I/O (Type 5)
Tube Reducer: Silicone Reducer, 3.5" to 3.0" - Black
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Black
Pipe Reducer: Silicone Reducer, 4.5" to 4.0" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 3.0"
Silicone Turbo Hoses: 3.0" Silicone Straight Coupler, Black
Silicone Turbo Hoses: 2.5" Silicone Straight Coupler, Black
Water to Air Intercoolers: Water to Air Intercooler, 12.25"x12.25"x4.5", Bend I/O (Type 14)
Pipe Reducer: Silicone Reducer, 4.0" to 3.75" - Black
Long Flow Style Water to Air Intercooler: Water to Air Intercooler, 15"x 6.5"x 6", Long Flow (Type 26)
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 4.0"
T Bolt Hose Clamp: T-Bolt Clamp for 4.0" Silicone Parts
Aluminum Pipe: 2' Straight Aluminum Pipe, 4.0"
Mandrel SS: 2' Mandrel Bent Stainless Steel 180° Bend, 3.0"
Water to Air Ice Box Reservoir: Water to Air Ice Box Reservoir
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Black
Aluminum Pipe: 2' Straight Aluminum Pipe, 3.0"
Long Flow Style Water to Air Intercooler: Water to Air Intercooler - 14.5"x5"x4.5", Long Flow (Type 19)
Silicone Hose: 3.0" Silicone 1' Straight Hose, Black
Silicone 90: 4.0" Silicone 90° Elbow, Black
Silicone Turbo Hoses: 4.0" Silicone Straight Coupler, Black
Silicone Hose: 3.0" Silicone 2' Straight Hose, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 4.0"
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 3.0"
Air to Water Radiator: Water to Air Intercooler Radiator - 24x12x1 (Type 100)
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Black
Small Liquid/Air Intercooler: Water to Air Intercooler - 11"x9"x3.5" - S/S I/O (Type 9)
Pipe Reducer: Silicone Reducer, 5.0" to 4.0" - Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.75" - Black
Tube Reducer: Silicone Reducer, 3.0" to 2.75" - Black
Water To Air: Water to Air Intercooler - 12"x12.25"x4.5" - S/S I/O (Type 3)
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 3.5"
T Bolt Clamp: T-Bolt Clamp for 2.0" Silicone Parts
Silicone Boost Vacuum Hose: 4mm Black Silicone Boost/Vacuum Hose Per Ft.
Silicone Hose: 2.5" Silicone 2' Straight Hose, Black
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Black
Aluminum Pipe: 2' Straight Aluminum Pipe, 3.5"
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Black
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2.5"
45 Degree Black Hoses: 2.75" Silicone 45° Elbow, Black
Tube Reducer: Silicone Reducer, 2.5" to 2.0" - Black
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.5"
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", Through I/O (Type 22)
Band Clamp: T-Bolt Clamp for 2.75" Silicone Parts
Exhaust Clamp: T-Bolt Clamp for 3.5" Silicone Parts
Mandrel SS: 2' Straight Stainless Steel Pipe, 3.0"
Water to Air Intercoolers: Water to Air Intercooler, 16.25"x12.25"x4.5", Bend I/O (Type 15)
Silicone 45: 3.5" Silicone 45° Elbow, Black
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 3.0"
High Temperature Water Hose: 3/4"(19mm) ID water hose, black (per foot)
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 3.5"
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Black
Aftermarket Boost Vacuum Hose: 6mm Black Silicone Boost/Vacuum Hose Per Ft.
Tube Reducer: Silicone Reducer, 3.0" to 2.5" - Black
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 180° Bend, 2.5"
Reducer Elbow: Silicone Reducer, 45° bend - 3.5" to 3.0" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.5"
Remote Radiator Filler Cap: Remote Radiator Inline Filler Cap - 3/4"
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 4.0" - Blue
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.5"
Silicone 30: 2.5" Silicone 30° Elbow, Black
Water to Air Intercoolers: Water to Air Intercooler, 20.25"x15.5"x12", S/S I/O (Type 27)
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Black
Reducer Elbow: Silicone Reducer, 90° bend - 2.25" to 2.0" - Black
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 180° Bend, 2.0"
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 90° Bend, 2.5"
V Band Clamps: 3.0" Stainless Steel V-Band Clamp Rings (Set of 2)
T Bolt: T-Bolt Clamp for 2.25" Silicone Parts
Top to Bottom Intercooler: Intercooler - 19.75x12x3.5, 2.5" I/O, Top to Bottom (Type 11)
V Bolt Clamp: 2.5" V-Band Clamp
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Black
Turbo Coupler: 3.0" Silicone Hump Hose, Black
Black Elbow: 2.0" Silicone 45° Elbow, Black
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 3"
Intercooler Fans: 7" Radiator Fan with Mounting Kit
T3 Turbo Blanket: T3 Turbo Blanket
02 Sensor Bung Notched Cut: Stainless Steel O2 Sensor Weld Bung, Notched Style, M18x1.5
Water to Air Intercoolers: Water to Air Intercooler - 11"x9.25"x3.5" - Bend I/O (Type 13)
Air to Water Radiator: Water to Air Intercooler Radiator - 12x12x2 (Type 117)
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 4.0"
Turbo Coupler: 2.5" Silicone Hump Hose, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.75"
High Flow Cat: AllFlow Test Pipe, Mild Steel - 3"
Silicone 30: 4.5" Silicone 30° Elbow, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 90°Short
Silicone Elbow: 2.25" Silicone 90° Elbow, Black
Pipe Reducer: Silicone Reducer, 4.5" to 3.5" - Black
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 4.0" - Black
Silicone Hose: 4.0" Silicone 2' Straight Hose, Black
Mandrel SS: 2' Mandrel Bent Stainless Steel 90° Bend, 3.0"
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x10" (Type 25)
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 114)
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.5"
T6 Turbo Flange: Stainless Steel Flange, T6 Turbo
Silicone 90: 1.5" Silicone 90° Elbow, Black
Automotive Pump Mounting Bracket: Pump Mounting Bracket
Heat Exchanger: Intercooler - 31"x11.75"x4" - 3" Inlet/Outlet (Type 2)
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 3.5"
Silicone Hose: 2.0" Silicone 2' Straight Hose, Black
Compressor Tbolt: T-Bolt Clamp for 1.75" Silicone Parts
DIY Intercooler Piping: Stainless Steel Joiner, 2.5"
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 115)
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Black
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 3.0"
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 111)
Water to Air Intercoolers: Water to Air Intercooler - 11"x9.5"x3.5" - Thru I/O (Type 16)
Silicone Boost Vacuum Hose: 10mm Black Silicone Boost/Vacuum Hose Per Ft.
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.0"
WPT717 Bosch Pump Harness: Bosch Cobra Water Pump Wiring Harness
90 degree blue hoses: 3.0" Silicone 90° Elbow, Blue
Compact Liquid/Air Intercooler: Water to Air Intercooler - 11"x9"x3.5" - O/S I/O (Type 8)
Front Mount Intercooler: Intercooler - 31"x11.75"x3" - 2.5" Inlet/Outlet (Type 1)
Pressure Tester: Intake Pressure Tester, CAP ONLY
90 Degree Black Hoses: 2.75" Silicone 90° Elbow, Black
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 180° Bend, 2.0"
T Bolt Hose Clamp: T-Bolt Clamp for 1.5" Silicone Parts
: Silicone Port System
Silicone Boost/Vac Hose: 8mm Black Silicone Boost/Vacuum Hose Per Ft.
Aluminum Pipe: 1' Straight Aluminum Pipe, 3.0"
Silicone 45: 1.75" Silicone 45° Elbow, Black
T Bolt Hose Clamp: T-Bolt Clamp for 4.5" Silicone Parts
Silicone Turbo Hoses: 2.0" Silicone Straight Coupler, Black
Liquid/Air: Water to Air Intercooler - 12"x12.25"x4.5" - O/S I/O (Type 4)
Silicone 30: 2.0" Silicone 30° Elbow, Black
Tube Reducer: Silicone Reducer, 3.0" to 2.0" - Black
T Bolt Hose Clamp: T-Bolt Clamp for 5.0" Silicone Parts
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 3.0"
Electric Radiator Fan: 10" Radiator Fan with Mounting Kit
Turbo Piping: Stainless Steel Joiner, 4.0"
Tube Reducer: Silicone Reducer, 2.75" to 2.5" - Black
Stainless Steel Brake Lines: PTFE Braided Stainless Steel Lines, -6 AN, per ft.
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.75"
Silicone 90: 3.5" Silicone 90° Elbow, Black
Silicone Turbo Hoses: 1.5" Silicone Straight Coupler, Black
Turbo Intercooler: Intercooler - 31"x11.75"x3" - 3" Inlet/Outlet (Type 0)
Water to Air Intercoolers: Water to Air Intercooler, 16"x12.25"x4.5", O/S I/O (Type 18)
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.0" - Black
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2.5"
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 45°Long
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.75" - Black
Water to Air Intercoolers: Water to Air Intercooler, 16.5"x12.25"x4.5", Thru I/O (Type 17)
Titanium Exhaust Heat Wrap: 2" X 50' Titanium Exhaust/Header Wrap
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.75"
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.0"
Silicone 60: 2.5" Silicone 60° Elbow, Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.5" - Black
Turbo Piping: Stainless Steel Joiner, 3.5"
Pipe Reducer: Silicone Reducer, 1.625" to 1.375" - Black
V Band Clamps: 2.5" Stainless Steel V-Band Clamp Rings (Set of 2)
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.0" - Blue
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 3.0"
V Band Clamps: 3.5" V-Band Clamp
Silicone 135: 2.0" Silicone 135° Elbow, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.25"
Band Clamp: T-Bolt Clamp for 3.25" Silicone Parts
Pipe Reducer: Silicone Reducer, 4.0" to 2.5" - Black
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.5"
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2.25"
Tube Reducer: Silicone Reducer, 2.25" to 2.0" - Black
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Black
T3 T3/T4 Turbo Divided Flange: Stainless Steel Divided Flange, T3 T3/T4 Turbo
Water to air fittings: Brass 1/2" NPT Male to 3/4" Barbed Straight
Heat Exchanger: Intercooler - 29"x6"x2.5" - 2.5" Inlet/Outlet (Type 7)
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 3.5"
Silicone 60: 4.0" Silicone 60° Elbow, Black
Reducer Elbow: Silicone Reducer, 45° bend - 2.25" to 2.0" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 3.5"
Stainless Steel Piping: Mandrel Bent Stainless Steel 45/180 Bend, 2.5"
Pipe Reducer: Silicone Reducer, 1.75" to 1.0" - Black
Stainless Steel UJ Bend: Mandrel Bent Stainless Steel 45/180 Bend, 1.5"
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.0" - Black
Intercooler Pipe Fabrication: Stainless Steel Joiner, 2.0"
Silicone Hose: 2.25" Silicone 2' Straight Hose, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 90°Short
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 90°Long
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 180° Bend, 2.25"
Pipe Reducer: Silicone Reducer, 3.75" to 3.0" - Black
Radiator Cooling Fan: 12" Radiator Fan with Mounting Kit
Tube Reducer: Silicone Reducer, 3.5" to 2.5" - Black
Silicone 135: 2.5" Silicone 135° Elbow, Black
Silicone Hose: 2.0" Silicone 2' Straight Hose, Blue
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 3.0" - Black
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 3.0"
T4 Turbo Flange: Stainless Steel Flange, T4 Turbo
Water to Air Intercoolers: Water to Air Intercooler, 150 PSI 17"x12.25"x9", Through I/O (Type 55)
Mandrel SS: 2' Mandrel Bent Stainless Steel 45° Bend, 3.0"
Aluminum Pipe: 1' Straight Aluminum Pipe, 3.5"
Stainless Steel UJ Bend: Mandrel Bent Aluminum 45/180 Bend, 1.5"
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Black
Silicone Hose: 1.5" Silicone 2' Straight Hose, Black
Engine Bay Heat Reducer: 2" X 100' Fiberglass Exhaust/Header Wrap, Black
Silicone 90: 1.25" Silicone 90° Elbow, Black
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 3.5" - Black
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -12 AN Black, per ft.
Silicone 30: 2.25" Silicone 30° Elbow, Black
Silicone 90: 1.0" Silicone 90° Elbow, Black
V Band Clamp: 2.0" V-Band Clamp
Pipe Reducer: Silicone Reducer, 1.25" to 1.0" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.75"
V Band Clamps: 3.0" Mild Steel V-Band Clamp Rings (Set of 2)
Titanium Turbo Blanket for T4: T4 Turbo Blanket - Titanium
T Band Clamp: T-Bolt Clamp for 3.75" Silicone Parts
Pipe Reducer: Silicone Reducer, 3.5" to 2.5" - Blue
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.0"
Silicone 45: 1.5" Silicone 45° Elbow, Black
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 45° Bend, 2.5"
Silicone Elbow: 2.5" Silicone 90° Elbow, Blue
Mandrel SS: 1' Mandrel Bent Stainless Steel 45° Bend, 3.0"
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 116)
Turbo Coupler: 3.5" Silicone Hump Hose, Black
Silicone Tubing: 3.0" Silicone 2' Straight Hose, Blue
Stainless Steel Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.75"
Silicone Hose: 2.5" Silicone 1' Straight Hose, Blue
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 1.75" - Black
T4 Turbo Blanket: T4 Turbo Blanket
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.25"
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.5"
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 1' Straight
Silicone 45: 4.5" Silicone 45° Elbow, Blue
Reinforced Silicone Heater Hose: 0.75" Reinforced Silicone Heater Hose, Blue (per foot)
Pipe Reducer: Silicone Reducer, 3.25" to 2.5" - Black
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 90°Short
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Black
Silicone 45: 4.5" Silicone 45° Elbow, Black
Tube Reducer: Silicone Reducer, 2.75" to 2.25" - Black
Reducer Elbow: Silicone Reducer, 45° bend - 2.75" to 2.5" - Black
Tube Reducer: Silicone Reducer, 3.0" to 2.25" - Black
Turbo Coupler: 1.5" Silicone Hump Hose, Black
Pipe Reducer: Silicone Reducer, 3.0" to 2.0" - Blue
Pipe Reducer: Silicone Reducer, 1.75" to 1.5" - Black
Worm Gear Clamps: Stainless Steel 0.375" Worm Gear Clamp (6-13mm)
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Silver
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.0"
Silicone 60: 2.0" Silicone 60° Elbow, Black
Silicone 60: 2.25" Silicone 60° Elbow, Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 2.5" V-Band Merge Collector
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Black
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x6" (Type 23)
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.75"
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", O/S I/O (Type 21)
Silicone 60: 1.5" Silicone 60° Elbow, Blue
Reinforced Silicone Heater Hose: 0.75" Reinforced Silicone Heater Hose, Black (per foot)
: Stainless Steel Line 90° Adaptor, -4 AN Black
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 90° Bend, 2.0"
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 3.0"
Mandrel SS Thick: 2' Straight Extra Thick Stainless Steel Pipe, 2.5"
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.0"
Washable air filter media.: Air Filter with Splash Guard - Carbon Fiber, 3" inlet
Pipe Reducer: Silicone Reducer, 4.0" to 2.5" - Blue
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.25"
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 2.25" - Black
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.25" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.25"
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 2.0"
Silicone 45: 4.0" Silicone 45° Elbow, Blue
02 Sensor Bung: Stainless Steel O2 Sensor Weld Bung, Lip Style, M18x1.5
Mandrel SS Thick: 2' Extra Thick Stainless Steel 45° Bend, 2.5"
: Compact Oil Drain Flange(Mitsubishi Style), -10AN
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 113)
: Stainless Steel Line Straight Adaptor, -4 AN Black
Tube Reducer: Silicone Reducer, 2.75" to 2.0" - Black
HKS Style BOV Flange: Universal BOV with NEW HKS Style Flange - Silver (Type 15)
Silicone 30: 1.75" Silicone 30° Elbow, Blue
Silicone Bend: 2.25" Silicone 45° Elbow, Black
Pipe Reducer: Silicone Reducer, 1.5" to 1.375" - Black
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 3' Long
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 180° Bend, 1.5"
T-pipe: BOV T-Pipe with HKS SSQV Style Flange - 2.5"
T-pipe: BOV T-Pipe with 2.0" V-Band Flange - 3.0"
T6 Turbo Divided Flange: Stainless Steel Divided Flange, T6 Turbo
Silicone 60: 3.0" Silicone 60° Elbow, Blue
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 3.0"
Silicone 60: 1.75" Silicone 60° Elbow, Black
TurboXS Style BOV Flange: Universal Classic Style BOV - Silver (Type 11)
Silicone 180: 2.75" Silicone 180° Elbow, Blue
Silicone Tubing: 3.0" Silicone 1' Straight Hose, Blue
T3 T3/T4 Turbo Flange: Stainless Steel Flange, T3 T3/T4 Turbo
Pipe Reducer: Silicone Reducer, 2.0" to 1.875" - Black
Bending Reducer: Silicone Reducer, 45° bend - 3.5" to 2.5" - Black
Silicone 30: 2.0" Silicone 30° Elbow, Blue
Silicone Couplers: 4.5" Silicone Straight Coupler, Black
Silicone Hose: 1.75" Silicone 2' Straight Hose, Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.625" - Black
Silicone Couplers: 3.75" Silicone Straight Coupler, Black
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 3.0"
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Silver (Type 6)
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 3.5" - Black
Aftermarket Boost Vacuum Hose: 6mm Red Silicone Boost/Vacuum Hose Per Ft.
Stainless Steel Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.75"
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 3.5"
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 90° Bend, 2.25"
Silicone 90: 3.25" Silicone 90° Elbow, Black
Silicone 90: 1.625" Silicone 90° Elbow, Black
Mandrel SS Thick: 2' Extra Thick Stainless Steel 180° Bend, 2.5"
Turbo Coupler: 4.5" Silicone Hump Hose, Black
Silicone 30: 2.75" Silicone 30° Elbow, Black
Stainless Steel Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.75"
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.75"
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Black
Silicone 60: 1.5" Silicone 60° Elbow, Black
Mandrel Thick SS: 2' Extra Thick Stainless Steel 90° Bend, 2.5"
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x8" (Type 24)
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 45° Bend, 2.0"
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 4" Long
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Gold/Blue
Hose Coupler: 2.25" Silicone Hump Hose, Black
Pipe Reducer: Silicone Reducer, 2.5" to 2.0" - Blue
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.0"
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 1' Straight
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.5" - Black
Silicone 90: 4.0" Silicone 90° Elbow, Blue
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Blue
Pipe Reducer: Silicone Reducer, 2.0" to 1.25" - Black
Silicone BOV T: Silicone T Pipe with 1" BOV Port - 2.5" Inlet/Outlet, black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS T25/T28 Merge Collector
Aluminum One-Way Check Valve -6AN: Aluminum One-Way Check Valve, -6AN Silver
Silicone 135: 2.5" Silicone 135° Elbow, Red
Tube Reducer: Silicone Reducer, 3.5" to 2.75" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 3.5"
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 3.5"
Stainless Steel 45/180 bend: Mandrel Bent Aluminum 45/180 Bend, 1.625"
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.75"
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 90° Bend, 2.0"
Mandrel SS Thick: 1' Extra Thick Stainless Steel 45° Bend, 2.5"
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 45°Long
T-pipe: BOV T-Pipe with Greddy Type S Style Flange - 3.0"
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 90°Long
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T3, T3/T4 Merge Collector with Flange
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 45° Bend, 2.25"
Pipe Reducer: Silicone Reducer, 2.25" to 2.0" - Blue
Silicone 135: 2.75" Silicone 135° Elbow, Black
Water to Air Intercoolers: Water to Air Intercooler, 12.5"x12.25"x4.5", Thru I/O (Type 10)
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.75"
Silicone 45: 3.25" Silicone 45° Elbow, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 90°Long
Red Hump Hose: 2.0" Silicone Hump Hose, Red
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 4.0" - Blue
Silicone 135: 2.25" Silicone 135° Elbow, Black
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 2.5" - Blue
Pipe Reducer: Silicone Reducer, 2.5" to 2.25" - Blue
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 135° Bend, 2.5"
Mandrel Bent SS: 1' Straight Stainless Steel Pipe, 2.5"
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.5"
Pipe Reducer: Silicone Reducer, 4.5" to 3.5" - Blue
Silicone Boost/Vac Hose: 8mm Red Silicone Boost/Vacuum Hose Per Ft.
Pipe Reducer: Silicone Reducer, 2.75" to 1.75" - Black
Tube Reducer: Silicone Reducer, 3.5" to 2.25" - Black
Worm Gear Clamps: Stainless Steel 3.75" Worm Gear Clamp (78-101mm)
Silicone 180: 2.5" Silicone 180° Elbow, Blue
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 1.5"
Mandrel Bent Thick Stainless Steel Tubing: 2' Straight Extra Thick Stainless Steel Pipe, 2.25"
Silicone 30: 1.5" Silicone 30° Elbow, Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.625" - Black
Pipe Reducer: Silicone Reducer, 2.75" to 2.5" - Blue
Silicone BOV T: Silicone T Pipe with 1.25" BOV Port - 2.5" Inlet/Outlet, black
Silicone 60: 1.25" Silicone 60° Elbow, Blue
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.5"
Water to air fittings: Brass 1/8" NPT Male to 4mm Barbed Straight
Bending Reducer: Silicone Reducer, 90° bend - 3.25" to 2.5" - Black
Reinforced Silicone Heater Hose: 0.875" Reinforced Silicone Heater Hose, Black (per foot)
Heat Exchanger for Oil: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 105)
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Blue (Type 5)
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Blue
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 112)
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T4 Merge Collector with Flange
Hump Hose Coupler: 2.25" Silicone Hump Hose, Blue
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.25" - Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Black
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 45° Bend, 2.25"
Red Elbow: 2.0" Silicone 45° Elbow, Red
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 45° Bend, 2.0"
Pipe Reducer: Silicone Reducer, 2.75" to 2.25" - Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 45°Long
Pipe Reducer: Silicone Reducer, 1.75" to 1.5" - Blue
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 45° Bend, 2.0"
Pipe Reducer: Silicone Reducer, 1.125" to 1.0" - Black
Aluminum One-Way Check Valve 12mm Barbed : Aluminum One-Way Check Valve, 12mm Barbed Silver
Stainless Steel : 2' Mandrel Bent Stainless Steel 180° Bend, 2.25"
Pipe Reducer: Silicone Reducer, 2.75" to 2.0" - Blue
Titanium Turbo Blanket for T3: T3 Turbo Blanket - Titanium
Silicone 30: 1.25" Silicone 30° Elbow, Black
Water to Air Coolers: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 104)
Stainless Steel 45/180 bend: Mandrel Bent Stainless Steel 45/180 Bend, 1.625"
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.625"
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 1.5"
Silicone 90: 1.0" Silicone 90° Elbow, Blue
Silicone Hose: 2.0" Silicone 2' Straight Hose, Red
Blitz Style BOV Flange: Universal BOV with Blitz Style Flange - Silver (Type 8)
Silicone 30: 2.75" Silicone 30° Elbow, Blue
Bending Reducer: Silicone Reducer, 45° bend - 3.25" to 2.5" - Blue
Downpipe Gasket 3.0" GT series/T3 Turbo: Stainless Steel Gasket GT series/T3 Turbo Discharge, 3.0"
SS Style BOV Flange: Universal BOV with 1" Inlet and Outlet - Silver (Type 10)
Stainless Steel Piping: Mandrel Bent Aluminum 45/180 Bend, 2.5"
HKS Style BOV Flange: Universal BOV with HKS Style Flange - Silver (Type 3)
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.75"
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 180° Bend, 2.5"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, Tee
Silicone 135: 2.5" Silicone 135° Elbow, Blue
Pipe Reducer: Silicone Reducer, 3.25" to 2.25" - Blue
Pipe Reducer: Silicone Reducer, 3.5" to 2.25" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 3.5"
Pipe Reducer: Silicone Reducer, 1.25" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.75" - Black
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 45° Bend, 2.0"
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 135° Bend, 2.0"
Bending Reducer: Silicone Reducer, 90° bend - 3.5" to 2.5" - Blue
Silicone 30: 4.5" Silicone 30° Elbow, Black
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Red
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Red
Silicnoe 60: 1.0" Silicone 60° Elbow, Blue
Turbo Coupler: 2.0" Silicone Hump Hose, Blue
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.625"
Silicone 90: 1.25" Silicone 90° Elbow, Blue
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.625"
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 45° Bend, 2.75"
Silicone 60: 1.75" Silicone 60° Elbow, Blue
Silicone 60: 2.0" Silicone 60° Elbow, Blue
Silicone 60: 2.25" Silicone 60° Elbow, Blue
Mandrel Bent Stainless Steel Tubing: 2' Straight Stainless Steel Pipe, 2.75"
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.0" - Blue
Bending Reducer: Silicone Reducer, 45° bend - 3.25" to 2.5" - Black
Hump Hose Coupler: 3.5" Silicone Hump Hose, Blue
Silicone 90: 3.5" Silicone 90° Elbow, Red
Silicone 45: 3.5" Silicone 45° Elbow, Red
Blue hump hose: 2.75" Silicone Hump Hose, Blue
Turbo Coupler: 1.0" Silicone Hump Hose, Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 90°Long
Mandrel Bent Thick Stainless Steel Tubing: 1' Straight Extra Thick Stainless Steel Pipe, 2.25"
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Silver
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 90° Bend, 2.25"
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 180° Bend, 1.5"
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 4.0"
Methanol Fuel Line: AN Female to Female Union, -10 AN Blue
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.0"
Pipe Reducer: Silicone Reducer, 3.5" to 3.25" - Blue
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 135° Bend, 2.25"
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 180°Long
Pipe Reducer: Silicone Reducer, 1.5" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.75" - Blue
Pipe Reducer: Silicone Reducer, 2.0" to 1.5" - Blue
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Blue
Turbo Piping: Stainless Steel Joiner, 3.25"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS to 1" NPS Reducer
Silicone Turbo Hoses: 2.25" Silicone Straight Coupler, Red
Reinforced Silicone Heater Hose: 0.875" Reinforced Silicone Heater Hose, Blue (per foot)
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 180°Long
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 90°Short
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 90°Short
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Silver
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 90°Long
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 3.5"
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Silver
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 4.0"
: AN Nut, -4 AN Blue
T28 T28 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T25/T28 Turbo
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Silver
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 5.0"
Aftermarket Brake Lines: AN Plug, -6 AN Blue
: AN Straight Union, -12 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Blue
Aluminum One-Way Check Valve -4AN: Aluminum One-Way Check Valve, -4AN Silver
Water to air fittings: Brass 1/2" NPT Male to 1" Barbed 90 Elbow
02 Sensor Plug Bolt: O2 Sensor Plug, M18x1.5
Fiberglass Header Wrap: 6" X 100' Fiberglass Exhaust/Header Wrap, Tan
Prosport Wideband Air Fuel Ratio Digital Gauge: Prosport Wideband Air/Fuel Ratio w/Sensor Digital Display-52mm
Carbon Fiber 90: 2.5" Carbon Fiber 90° Elbow
4' Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 4' Long
V Band Clamp: 2.25" V-Band Clamp
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Silver
V Band Clamps: 2.25" Mild Steel V-Band Clamp Rings (Set of 2)
Prosport Water Temperature Digital Gauge: Prosport Water Temperature Gauge Digital Display-52mm
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.5" to 2x 2.5" - Black
: AN to Barbed Fitting Adaptor, -12 AN to 1" Silver
: AN to NPT Adaptor, -12 AN to 3/8" NPT Black
How to prevent header rust: 6" X 100' Fiberglass Exhaust/Header Wrap, Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.0" - Black
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Black
Prosport Air Fuel Ratio Digital Gauge: Prosport Air/Fuel Ratio & Voltage Gauge Digital Display-52mm
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.5" - Black
Carbon Fiber Hose: 3.5" Carbon Fiber 2' Straight Hose
: AN to NPT Adaptor, -10 AN to 3/8" NPT Blue
Water to Air Pump 0392022002: Cobra 0392022002 Intercooler Pump and Harness (House Brand/Aftermarket)
Prosport Exhaust Gas Temperature Digital Gauge: Prosport Exhaust Gas Temperature Gauge Digital display-52mm
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Black
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Black
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Black
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Black
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Black
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.5" to 2x 2.5" - Blue
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 2.5" to 2x 2.0" - Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 2.5" to 2x 2.0" - Black
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Blue
: AN to NPT Adaptor, -10 AN to 3/8" NPT Black
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.5" - Blue
Prosport Digital Clock : Prosport Performance Series Digital Clock-52mm
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Black
Prosport Oil Temperature Digital Gauge: Prosport Oil Temperature Gauge Digital Display-52mm
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.0" - Blue
: NPT to NPT Adapter, 1/2" NPT to 3/8" NPT Blue
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Black
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Black
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Black
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Black
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Black
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Blue
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -4AN
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -6AN
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Blue
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -8AN
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -10AN
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -12AN
: EV1 Fuel Injector Connector Pigtail Harness
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Blue
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Silver
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Black
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Black
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Blue
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Blue
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Blue
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Black
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Silver
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Blue
: AN to NPT Adaptor, -12 AN to 3/8" NPT Blue
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Blue
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -12 AN to 1" Black
: AN to Barbed Fitting Adaptor, -12 AN to 1" Blue
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Black
: NPT to NPT Adapter, 1/2" NPT to 3/8" NPT Black
Reducer Elbow: Silicone Reducer, 45° bend - 4.0" to 3.5" - Black
Aluminum Pipe: 2' Straight Aluminum Pipe, 1.5"
Silicone Turbo Hoses: 2.75" Silicone Straight Coupler, Black
Silicone Hose: 2.5" Silicone 1' Straight Hose, Black
Silicone Hose: 3.5" Silicone 2' Straight Hose, Black
Turbo Piping: Stainless Steel Joiner, 3.0"
Silicone 30: 3.5" Silicone 30° Elbow, Black
Liquid to air fittings: Brass 1/2" NPT Male to 3/4" Barbed 90 Elbow
Pipe Reducer: Silicone Reducer, 1.5" to 1.0" - Black
Silicone 30: 3.0" Silicone 30° Elbow, Black
Pipe Reducer: Silicone Reducer, 1.5" to 1.25" - Black
Silicone Boost Vacuum Hose: 4mm Blue Silicone Boost/Vacuum Hose Per Ft.
Intercooler Pump: Water to Air Intercooler Radiator Pump, Rule 401FC
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.0" - Black
Black Hump Hose: 2.0" Silicone Hump Hose, Black
Turbo Coupler: 4.0" Silicone Hump Hose, Black
Silicone 90: 1.75" Silicone 90° Elbow, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 1.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 1.5"
Stainless Steel Brake Lines: PTFE Braided Stainless Steel Lines, -6 AN Black, per ft.
Aftermarket Boost Vacuum Hose: 6mm Blue Silicone Boost/Vacuum Hose Per Ft.
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.0"
Silicone Boost Vacuum Hose: 10mm Blue Silicone Boost/Vacuum Hose Per Ft.
Tube Reducer: Silicone Reducer, 2.5" to 2.25" - Black
Silicone 60: 3.0" Silicone 60° Elbow, Black
Silicone Turbo Hoses: 2.25" Silicone Straight Coupler, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 4.0"
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Black
Black Silicone Hose: 2.75" Silicone 2' Straight Hose, Black
Reinforced Silicone Heater Hose: 1.0" Reinforced Silicone Heater Hose, Black (per foot)
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 4.0"
Reducer Elbow: Silicone Reducer, 90° bend - 2.25" to 2.0" - Blue
Silicone 45: 3.0" Silicone 45° Elbow, Blue
Mandrel SS: 1' Mandrel Bent Stainless Steel 90° Bend, 3.0"
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 1.5"
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 1.5"
Reinforced Silicone Heater Hose: 0.625" Reinforced Silicone Heater Hose, Black (per foot)
Silicone 30: 4.0" Silicone 30° Elbow, Black
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 90° Bend, 2.75"
Pipe Reducer: Silicone Reducer, 3.25" to 3.0" - Black
AN -8 Stainless Steel Hoses: PTFE Braided Stainless Steel Lines, -8 AN Black, per ft.
Custom Aluminum V-Band Intake Flange: 3.0" Aluminum V-Band Clamp Rings (Set of 2)
V Band Clamps: 2.5" Mild Steel V-Band Clamp Rings (Set of 2)
Aluminum Pipe: 1' Straight Aluminum Pipe, 4.0"
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.25" - Black
Custom Aluminum V-Band Intake Flange: 3.5" Aluminum V-Band Clamp Rings (Set of 2)
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -10 AN Black, per ft.
Pipe Reducer: Silicone Reducer, 1.75" to 1.625" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.0"
Black Hump Hose Couplers: 2.75" Silicone Hump Hose, Black
Mandrel SS: 1' Straight Stainless Steel Pipe, 3.0"
AN -8 Stainless Steel Hoses: PTFE Braided Stainless Steel Lines, -8 AN, per ft.
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Black
Pipe Reducer: Silicone Reducer, 5.0" to 4.5" - Black
Pipe Reducer: Silicone Reducer, 3.75" to 3.5" - Black
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Black
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.0"
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.25"
Silicone Boost/Vac Hose: 8mm Blue Silicone Boost/Vacuum Hose Per Ft.
Turbo Piping: Stainless Steel Joiner, 2.75"
Mandrel Bent SS: 2' Straight Stainless Steel Pipe, 2.5"
Pipe Reducer: Silicone Reducer, 3.5" to 3.25" - Black
: T3/T4 Turbo Oil Drain Flange, -10AN
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 1.5"
Aluminized Thermal Wrap: 2" X 33' Aluminized Thermal Wrap for Intake Pipes
Stainless Steel Pipe: 2' Straight Stainless Steel Pipe, 1.5"
Custom Aluminum V-Band Intake Flange: 4.0" Aluminum V-Band Clamp Rings (Set of 2)
Remote Radiator Filler Cap: Remote Radiator Inline Filler Cap - 1.5"
Pipe Reducer: Silicone Reducer, 3.0" to 2.75" - Blue
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.5" - Black
Silicone Turbo Hoses: 1.75" Silicone Straight Coupler, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 1' Straight
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.5"
Stainless Steel : 1' Mandrel Bent Stainless Steel 135° Bend, 2.25"
Silicone Hose: 4.5" Silicone 2' Straight Hose, Blue
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Black
V Band Clamps: 3.5" Stainless Steel V-Band Clamp Rings (Set of 2)
Pipe Reducer: Silicone Reducer, 3.5" to 3.0" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.25"
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Black
Worm Gear Clamps: Stainless Steel 0.75" Worm Gear Clamp (13-23mm)
Pipe Reducer: Silicone Reducer, 1.625" to 1.5" - Black
4.0" Black Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Black
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 180°Long
Silicone Boost Vacuum Hose: 4mm Red Silicone Boost/Vacuum Hose Per Ft.
Worm Gear Clamps: Stainless Steel 1.25" Worm Gear Clamp (18-32mm)
90 degree blue hoses: 2.75" Silicone 90° Elbow, Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Black
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.25"
Valve Stem: Tire Valve Stem - Clamp Down Type
Smooth bore PTFE hose: PTFE Braided Stainless Steel Lines, -4 AN, per ft.
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 4" Long
Custom Intercooler Piping: Stainless Steel Joiner, 2.25"
Silicone 45: 3.0" Silicone 45° Elbow, Red
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 108)
Silicone 60: 3.5" Silicone 60° Elbow, Black
Silicone Couplers: 5.0" Silicone Straight Coupler, Black
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.75"
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.0"
Silicone Coupler: 2.5" Silicone Straight Coupler, Blue
Custom Aluminum V-Band Intake Flange: 2.5" Aluminum V-Band Clamp Rings (Set of 2)
V Band Clamps: 4.0" Mild Steel V-Band Clamp Rings (Set of 2)
Silicone Hose: 2.5" Silicone 2' Straight Hose, Blue
Mandrel Bent Stainless Steel Tubing: 1' Straight Stainless Steel Pipe, 2.75"
Silicone 180: 3.0" Silicone 180° Elbow, Black
Silicone Tubing: 3.5" Silicone 2' Straight Hose, Blue
Silicone Hose: 4.0" Silicone 2' Straight Hose, Blue
Stainless Steel : 1' Mandrel Bent Stainless Steel 90° Bend, 2.25"
Silicone 90: 3.0" Silicone 90° Elbow, Red
Pipe Reducer: Silicone Reducer, 2.25" to 1.75" - Blue
Silicone Hose: 3.0" Silicone 2' Straight Hose, Red
V Band Clamps: 4.0" V-Band Clamp
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -10 AN, per ft.
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 2.5"
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -12 AN, per ft.
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 45°Long
Stainless Steel Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.75"
Silicone 45: 1.0" Silicone 45° Elbow, Black
Silicone Hose: 2.5" Silicone 2' Straight Hose, Red
T-pipe: BOV T-Pipe with Greddy Type S Style Flange - 2.5"
Silicone Turbo Hoses: 1.25" Silicone Straight Coupler, Black
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.25"
Silicone 30: 2.5" Silicone 30° Elbow, Blue
Silicone 30: 4.0" Silicone 30° Elbow, Blue
Silicone Hose: 1.625" Silicone 2' Straight Hose, Black
Smooth bore PTFE hose: PTFE Braided Stainless Steel Lines, -4 AN Black, per ft.
Silicone Coupler: 3.0" Silicone Straight Coupler, Blue
Air Filter Media: Foam Style Air Filter - red, 2.5" inlet
Silicone 90: 1.75" Silicone 90° Elbow, Blue
: T3/T4 Turbo Oil Feed Flange, -4AN
Reinforced Silicone Heater Hose: 0.5" Reinforced Silicone Heater Hose, Blue (per foot)
Stainless Steel Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.75"
Water to Air Intercooler: Water to Air Intercooler DIY Kit 1200 HP
Stainless Steel Tube: 2' Straight Stainless Steel Pipe, 2.0"
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 109)
X Crossover Exhaust Pipe: Stainless Steel Exhaust X Pipe, 2.5"
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 3.0"
Silicone 90: 1.5" Silicone 90° Elbow, Blue
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Black
V Band Clamps: 3.5" Mild Steel V-Band Clamp Rings (Set of 2)
T4 Turbo Divided Flange: Stainless Steel Divided Flange, T4 Turbo
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 106)
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.0"
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Bending Reducer: Silicone Reducer, 90° bend - 3.5" to 2.5" - Black
Silicone 30: 3.0" Silicone 30° Elbow, Blue
Water to air adapters: Brass 3/4" NPT Male to 3/4" Barbed Straight
T-pipe: BOV HKS SSQV Style Flange with 1.25" Outlet
Silicone Coupler: 2.0" Silicone Straight Coupler, Blue
Stainless Steel Pipe Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.5"
2.5" air filter: Dual-Cone Air Filter - black, 2.5" inlet
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Silver
Water to air fittings: 6AN brass ring
Universal Air Filter: Dual-Cone Air Filter - black, 3" inlet
Ultimate Drag Racing Water to Air Intercooler: Water to Air Ultimate Drag Kit
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2"
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 4.0"
Pipe Reducer: Silicone Reducer, 3.0" to 2.5" - Blue
Aluminum Pipe: 1' Straight Aluminum Pipe, 1.5"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 2.5" V-Band Merge Collector with Flange
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 90°Short
Hump Hose Coupler: 3.0" Silicone Hump Hose, Blue
Slim Electric Fan: 14" Radiator Fan with Mounting Kit
V Band Clamps: 2.0" Mild Steel V-Band Clamp Rings (Set of 2)
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 90°Short
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Silver
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Silver
Stainless Steel : 2' Straight Stainless Steel Pipe, 2.25"
Custom Aluminum V-Band Intake Flange: 2.75" Aluminum V-Band Clamp Rings (Set of 2)
Stainless Steel Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.75"
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.5"
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2"
Silicone 90: 4.5" Silicone 90° Elbow, Black
3.0" GT series/T3 Turbo Flange: Stainless Steel Flange, 3.0" GT series/T3 Turbo Discharge
Silicone Bend: 2.5" Silicone 45° Elbow, Blue
Stainless Steel Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.75"
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.5"
Silicone Couplers: 4.0" Silicone Straight Coupler, Blue
Aluminum One-Way Check Valve 10mm Barbed : Aluminum One-Way Check Valve, 10mm Barbed Silver
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Blue
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe, 3.0"
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 2' Long
Silicone 30: 3.25" Silicone 30° Elbow, Black
Silicone 45: 1.25" Silicone 45° Elbow, Black
Fiberglass Header Wrap: 6" X 50' Fiberglass Exhaust/Header Wrap, Tan
Silicone 60: 2.75" Silicone 60° Elbow, Black
Silicone Turbo Hoses: 3.0" Silicone Straight Coupler, Red
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.75"
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.25"
Silicone 180: 2.0" Silicone 180° Elbow, Black
Air Filter Material: Dual-Cone Air Filter - black, 3.5" inlet
Coolant System and Head Gasket Pressure Test Valve: Coolant System and Head Gasket Pressure Test Valve
Reducer Elbow: Silicone Reducer, 45° bend - 3.5" to 3.0" - Blue
Stainless Steel Locking Ties: Stainless Steel Zip Tie/Cable Tie, 12"
Silicone Boost Vacuum Hose: 10mm Red Silicone Boost/Vacuum Hose Per Ft.
Silicone 45: 3.5" Silicone 45° Elbow, Blue
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Red/Blue
4.0" Silver Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Silver
Silicone Hose: 2.0" Silicone 1' Straight Hose, Black
Silicone Hose: 1.5" Silicone 2' Straight Hose, Blue
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 90° Bend, 2.0"
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2.25"
Turbo Coupler: 4.0" Silicone Hump Hose, Blue
Custom Aluminum V-Band Intake Flange: 2.25" Aluminum V-Band Clamp Rings (Set of 2)
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.25"
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.5"
Pipe Reducer: Silicone Reducer, 3.75" to 3.25" - Black
Pipe Reducer: Silicone Reducer, 1.625" to 1.25" - Black
Silicone 30: 1.75" Silicone 30° Elbow, Black
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Black
Mandrel SS Thick: 2' Extra Thick Stainless Steel 135° Bend, 2.5"
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Blue
Red Bend: 2.0" Silicone 90° Elbow, Red
Reinforced Silicone Heater Hose: 1.0" Reinforced Silicone Heater Hose, Blue (per foot)
Pipe Reducer: Silicone Reducer, 3.5" to 2.75" - Blue
90 degree blue hoses: 3.5" Silicone 90° Elbow, Blue
Water to Air Intercooler: Water to Air Intercooler DIY Kit 600 HP
T-pipe: BOV T-Pipe with 2.0" V-Band Flange - 2.5"
Air Filter Media: Foam Style Air Filter - red, 3" inlet
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Silver
Silicone 90: 2.5" Silicone 90° Elbow, Red
Water to air fittings: 8AN brass ring
Worm Gear Clamps: Stainless Steel 5.5" Worm Gear Clamp (130-152mm)
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe Reducer, 3.0" to 2.5"
Silicone Hose: 1.0" Silicone 2' Straight Hose, Black
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 103)
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Black
Mandrel SS: 1' Mandrel Bent Stainless Steel 180° Bend, 3.0"
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 8" Long
02 Sensor Bung 45 Degree Cut Angled: Stainless Steel O2 Sensor Weld Bung, 45° cut, M18x1.5
Silicone Elbow: 2.25" Silicone 90° Elbow, Blue
High Temperature Water Hose: 1"(25mm) ID water hose, black (per foot)
V Band Clamps: 2.0" Stainless Steel V-Band Clamp Rings (Set of 2)
Worm Gear Clamps: Stainless Steel 3" Worm Gear Clamp (54-82mm)
2.5" GT series/T3 Turbo Flange: Stainless Steel Flange, 2.5" GT series/T3 Turbo Discharge
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 10" Long
Air Filter Media: Foam Style Air Filter - green, 3" inlet
Water to Air Intercooler: Water to Air Intercooler DIY Kit 350 HP
Blue Couplers: 2.75" Silicone 2' Straight Hose, Blue
Red Silicone Hose: 2.75" Silicone 2' Straight Hose, Red
Mandrel Bent Thick SS: 1' Straight Extra Thick Stainless Steel Pipe, 2.0"
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Black
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.25"
Pipe Reducer: Silicone Reducer, 2.0" to 1.0" - Black
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 180° Bend, 2.75"
Mandrel SS Thick: 1' Extra Thick Stainless Steel 90° Bend, 2.5"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T3, T3/T4 Merge Collector
Reinforced Silicone Heater Hose: 0.625" Reinforced Silicone Heater Hose, Blue (per foot)
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.5"
Silicone 60: 4.0" Silicone 60° Elbow, Blue
: Stainless Steel Line Straight Adaptor, -4 AN Red/Blue
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Black
Silicone Hose: 3.25" Silicone 2' Straight Hose, Black
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 8" Long
Pipe Reducer: Silicone Reducer, 4.0" to 3.25" - Blue
Gasket for V-Band Assembly: Gasket for 3.0" Aluminum V-Band Assembly
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Silver
V Band Clamps: 4.0" Stainless Steel V-Band Clamp Rings (Set of 2)
Water to air fittings: 10AN brass ring
Exhaust Manifold Heat Wrap: 6" X 50' Fiberglass Exhaust/Header Wrap, Black
Stainless Steel : 1' Mandrel Bent Stainless Steel 45° Bend, 2.25"
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Black
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Red/Blue
Greddy Type RS Style BOV Flange: Universal BOV with Greddy Type RS Style Flange - Silver (Type 7)
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2.5" NPS to 1.5" NPS Reducer
Pipe Reducer: Silicone Reducer, 1.75" to 1.25" - Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Black
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Red (Type 4)
Worm Gear Clamps: Stainless Steel 4.25" Worm Gear Clamp (91-114mm)
T-pipe: BOV T-Pipe with 1" BOV T - 2.5"
Reinforced Silicone Heater Hose: 0.5" Reinforced Silicone Heater Hose, Black (per foot)
Silicone Hose: 3.5" Silicone 2' Straight Hose, Red
Radiator Fan Transmission Oil Cooler Mounting Kit: Radiator Fan Mounting Kit
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 4" Long
Silicone Turbo Hoses: 2.5" Silicone Straight Coupler, Red
X Crossover Exhaust Pipe: Stainless Steel Exhaust X Pipe, 3.0"
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.5"
Silicone Hose: 1.75" Silicone 2' Straight Hose, Blue
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Blue
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Red
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 3.0"
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Silver
Worm Gear Clamps: Stainless Steel 2.25" Worm Gear Clamp (40-63mm)
T3 T3/T4 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T3 T3/T4 Turbo
Silicone 90: 4.5" Silicone 90° Elbow, Blue
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Black
Silicone Turbo Hoses: 3.25" Silicone Straight Coupler, Black
Stainless Steel Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.75"
Silicone Hose: 1.0" Silicone 2' Straight Hose, Blue
Pipe Reducer: Silicone Reducer, 3.25" to 2.75" - Black
Silicone 180: 2.5" Silicone 180° Elbow, Black
Stainless Steel : 2' Mandrel Bent Stainless Steel 45° Bend, 2.25"
Silicone 45: 2.0" Silicone 45° Elbow, Blue
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Black
Silicone 90: 2.0" Silicone 90° Elbow, Blue
3.0" Turbo Intake Aluminum Velocity Stack : 3.0" Aluminum Velocity Stack, Silver
: Stainless Steel Line Straight Adaptor, -4 AN Silver
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -6 AN Lines (5 Pack)
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 1' Straight
Air Filter Media: Foam Style Air Filter - green, 2.5" inlet
Auto Air Filter: Dual-Cone Air Filter - chrome, 3" inlet
Fuel Pump Mounting Bracket: 2.0" Aluminum Water/Fuel Pump Mounting Bracket, Black
Gasket for V-Band Assembly: Gasket for 2.5" Aluminum V-Band Assembly
T4 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T4 Turbo
Silicone 45: 2.5" Silicone 45° Elbow, Red
Aluminum One-Way Check Valve 8mm Barbed : Aluminum One-Way Check Valve, 8mm Barbed Silver
Worm Gear Clamps: Stainless Steel 3.5" Worm Gear Clamp (72-95mm)
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Red
V Band Clamps: 4.5" V-Band Clamp
Pipe Reducer: Silicone Reducer, 4.5" to 4.0" - Blue
Header Wrap: 2" X 100' Fiberglass Exhaust/Header Wrap, Tan
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Blue
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 2.5" - Black
Worm Gear Clamps: Stainless Steel 4" Worm Gear Clamp (84-108mm)
Hose Coupler: 2.5" Silicone Hump Hose, Blue
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 180° Bend, 2.0"
Gasket for V-Band Assembly: Gasket for 2.0" Aluminum V-Band Assembly
Gasket for V-Band Assembly: Gasket for 4.0" Aluminum V-Band Assembly
Reducer Elbow: Silicone Reducer, 45° bend - 4.0" to 3.5" - Blue
Worm Gear Clamps: Stainless Steel 3.25" Worm Gear Clamp (65-89mm)
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Red/Blue
Silicone Turbo Hoses: 1.625" Silicone Straight Coupler, Black
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.0" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 3.0"
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.25"
Silicone 180: 3.0" Silicone 180° Elbow, Blue
Worm Gear Clamps: Stainless Steel 2.5" Worm Gear Clamp (46-70mm)
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 4.0"
Stainless Steel Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.75"
Methanol Fuel Line: AN Straight Union, -6 AN Black
Silicone 45: 1.625" Silicone 45° Elbow, Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS T25/T28 Merge Collector with Flange
Pipe Reducer: Silicone Reducer, 2.25" to 1.5" - Black
Silicone Turbo Hoses: 1.0" Silicone Straight Coupler, Black
Water Injection: Stainless Steel Joiner with Water Injection/Probe Taps, 2.0"
Silicone Coupler: 2.25" Silicone Straight Coupler, Blue
Pipe Reducer: Silicone Reducer, 3.25" to 3.0" - Blue
Silicone Tubing: 3.25" Silicone 2' Straight Hose, Blue
Turbo Coupler: 1.75" Silicone Hump Hose, Black
How to prevent header rust: 1" X 50' Fiberglass Exhaust/Header Wrap, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.75"
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 90° Bend, 2.0"
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Red/Blue
45 degree blue hoses: 2.75" Silicone 45° Elbow, Blue
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 10" Long
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Black
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Blue
90 Degree Red Hoses: 2.75" Silicone 90° Elbow, Red
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 3.5"
Silicone 135: 3.0" Silicone 135° Elbow, Blue
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 90° Bend, 2.5"
: Stainless Steel Line 90° Adaptor, -4 AN Silver
: Stainless Steel Line 45° Adaptor, -4 AN Black
Gasket for V-Band Assembly: Gasket for 3.5" Aluminum V-Band Assembly
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 3.5"
Reducer Elbow: Silicone Reducer, 45° bend - 2.25" to 2.0" - Blue
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.5" - Blue
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.5"
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Silver
Pipe Reducer: Silicone Reducer, 4.0" to 3.25" - Black
Pipe Reducer: Silicone Reducer, 2.5" to 1.5" - Blue
Silicone 180: 2.25" Silicone 180° Elbow, Black
Silicone 180: 2.5" Silicone 180° Elbow, Red
3.0" Turbo Intake Aluminum Velocity Stack : 3.0" Aluminum Velocity Stack, Black
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 2.5" - Black
Aluminum One-Way Check Valve 6mm Barbed : Aluminum One-Way Check Valve, 6mm Barbed Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Black
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Red/Blue
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 45° Bend, 2.75"
Pipe Reducer: Silicone Reducer, 3.0" to 2.5" - Red
4.0" Blue Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Blue
Silicone 45: 1.75" Silicone 45° Elbow, Blue
Intercooler Piping: 2.25" Silicone 2' Straight Hose, Blue
Stainless Steel Pipe Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.5"
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Black
Silicone 30: 2.25" Silicone 30° Elbow, Blue
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.25"
Silicone Hose: 1.25" Silicone 2' Straight Hose, Black
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Black
Silicone Turbo Hoses: 1.5" Silicone Straight Coupler, Blue
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 45° Bend, 2.5"
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe Reducer, 2.5" to 2.25"
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.75" - Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 3.5"
Pipe Reducer: Silicone Reducer, 2.25" to 1.75" - Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 90°Long
Pipe Reducer: Silicone Reducer, 1.625" to 1.0" - Black
Worm Gear Clamps: Stainless Steel 1" Worm Gear Clamp (14-27mm)
Silicone Bend: 2.25" Silicone 45° Elbow, Red
Carbon Air Filter: Air Filter with Splash Guard - Carbon Fiber, 2.5" inlet
Silicone Elbow: 2.25" Silicone 90° Elbow, Red
Silicone Connector: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Blue
Silicone Couplet: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Black
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Gold/Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 4.0"
3.5" Black Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Black
Silicone Sleeve: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Red
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 4.0"
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Blue
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Blue
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 3.0" - Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 1' Straight
Custom Aluminum V-Band Intake Flange: 2.0" Aluminum V-Band Clamp Rings (Set of 2)
Pipe Reducer: Silicone Reducer, 3.0" to 2.25" - Blue
Silicone Boot: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Red
Worm Gear Clamps: Stainless Steel 1.75" Worm Gear Clamp (27-51mm)
Silicone Sleeve: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Black
Silicone Couplet: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Blue
Water to air fittings: Brass 1/2" NPT Male to 5/8" Barbed Straight
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Red/Blue
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Silver
Upgraded Brake Fluid Line: AN Tee, -10 AN Silver
Stainless Steel : 1' Mandrel Bent Stainless Steel 180° Bend, 2.25"
Turbo Coupler: 3.25" Silicone Hump Hose, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 1' Straight
Aftermarket Brake Lines: AN Plug, -6 AN Silver
Water to air fittings: Brass 1" NPT Male to 1-1/4" Barbed Straight
Silicone Boots: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Blue
AN Lines Pressure Tester: AN to NPT Female Adaptor, -6 AN to 1/8''-27 NPTF Silver
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -8 AN Lines (5 Pack)
Stainless Steel : 2' Mandrel Bent Stainless Steel 90° Bend, 2.25"
Silicone Connector: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Red
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.5"
Silicone Joint: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Black
Worm Gear Clamps: Stainless Steel 2.75" Worm Gear Clamp (50-76mm)
Silicone 30: 1.0" Silicone 30° Elbow, Blue
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.75"
Water to air fittings: 12AN brass ring
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 180°Long
Turbo Coupler: 1.5" Silicone Hump Hose, Blue
How to prevent header rust: 6" X 50' Fiberglass Exhaust/Header Wrap, Blue
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 3.5" - Blue
Silicone Turbo Hoses: 2.75" Silicone Straight Coupler, Red
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 3.5" - Blue
Mandrel SS Thick: 1' Extra Thick Stainless Steel 180° Bend, 2.5"
Water to air fittings: Brass 1/2" NPT Male to 1" Barbed Straight
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS to 1.5" NPS Reducer
K N Air Filter Alternative: Dual-Cone Air Filter - chrome, 3.5" inlet
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 1.5"
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 2.25" - Blue
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.375" - Black
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.5"
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.0" - Blue
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.0"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, Tee
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 4.0"
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 3.0"
Replacement Air Filter: Dual-Cone Air Filter - chrome, 2.5" inlet
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Black
Silicone 60: 2.5" Silicone 60° Elbow, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 3.0" V-Band Merge Collector
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.25"
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 180° Bend, 2.0"
Silicone Bend: 2.25" Silicone 45° Elbow, Blue
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Red
Water to air fittings: Brass 1/2" NPT Male to 1/2" Barbed Straight
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.0"
Stainless Steel Pipe: 1' Straight Stainless Steel Pipe, 1.5"
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Silver
Silicone 60: 2.75" Silicone 60° Elbow, Blue
IAT Installation: Stainless Steel Joiner with Water Injection/Probe Taps, 2.5"
Silicone Hose: 4.5" Silicone 2' Straight Hose, Black
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Red/Blue
Silicone 180: 2.25" Silicone 180° Elbow, Blue
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Black
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 90° Bend, 1.5"
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 90° Bend, 2.75"
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Black
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Black
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Gold/Blue
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Silver
Pipe Reducer: Silicone Reducer, 3.25" to 2.75" - Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 1.5"
Silicone Coupler: 2.75" Silicone Straight Coupler, Blue
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 180°Long
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.75"
Clutch Fluid Line: AN Plug, -10 AN Silver
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.25"
Worm Gear Clamps: Stainless Steel 0.5" Worm Gear Clamp (6-16mm)
Car Air Filter: Dual-Cone Air Filter - blue, 3" inlet
Water to Air Pump 0392022002: Water to Air Intercooler Pump and Harness, Bosch Cobra
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Black
Worm Gear Clamps: Stainless Steel 1.5" Worm Gear Clamp (21-44mm)
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.0"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS to 1.25" NPS Reducer
Pipe Reducer: Silicone Reducer, 1.375" to 1.125" - Black
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Silver
Pipe Reducer: Silicone Reducer, 1.375" to 1.25" - Black
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 3.0"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.75"
Pipe Reducer: Silicone Reducer, 1.875" to 1.5" - Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.5"
Pipe Reducer: Silicone Reducer, 2.25" to 1.5" - Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 90°Short
: NPT Plug, 1/8" NPT Black
Turbo Coupler: 1.25" Silicone Hump Hose, Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.5"
Pipe Reducer: Silicone Reducer, 2.5" to 1.5" - Black
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.0"
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Red
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Black
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Silicone 135: 2.0" Silicone 135° Elbow, Blue
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe, 2.5"
Braided Stainless Steel Hose: AN Plug, -8 AN Black
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Black
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.25"
Turbo Coupler: 4.5" Silicone Hump Hose, Blue
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Red/Blue
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Gold/Blue
Mandrel SS Thick: 1' Extra Thick Stainless Steel 135° Bend, 2.5"
Turbo Coupler: 3.0" Silicone Hump Hose, Red
Stainless Steel Zip Ties: Stainless Steel Zip Tie/Cable Tie, 8"
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.625"
AN Lines Pressure Tester: AN to NPT Female Adaptor, -10 AN to 1/8''-27 NPTF Silver
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 1.75" - Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Black
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Black
Silicone 60: 1.0" Silicone 60° Elbow, Black
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.25"
Heat Exchanger for Oil: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 110)
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Black
Mandrel Bent Thick SS: 2' Straight Extra Thick Stainless Steel Pipe, 2.0"
: AN Bulkhead Adaptor, -8 AN Black
Silicone 60: 1.25" Silicone 60° Elbow, Black
: AN Nut, -6 AN Black
Silicone Hose: 2.25" Silicone 2' Straight Hose, Red
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.125"
Water to air fittings: Brass 1/8" NPT Male to 8mm Barbed Straight
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Black
Water to air installation kit: Water to Air Intercooler Installation Kit (1200HP)
Silicone 30: 1.5" Silicone 30° Elbow, Blue
Liquid to air installation kit: Water to Air Intercooler Installation Kit (350/600HP)
Braided Stainless Steel Hose: AN Plug, -8 AN Silver
Pipe Reducer: Silicone Reducer, 3.25" to 2.5" - Blue
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Blue
Exhaust Heat Wrap: 1" X 50' Fiberglass Exhaust/Header Wrap, Blue
Silicone 45: 1.5" Silicone 45° Elbow, Blue
Engine Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 102)
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 1.5"
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Blue
Pipe Reducer: Silicone Reducer, 3.75" to 3.0" - Blue
Stainless Steel Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.75"
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Black
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Silver
Air Filter Media: Foam Style Air Filter - red, 3.5" inlet
Air Filter Media: Foam Style Air Filter - green, 3.5" inlet
Silicone T Pipe: Silicone T Pipe with 1" BOV Port - 2.5" Inlet/Outlet, blue
Silicone Hose: 1.25" Silicone 2' Straight Hose, Blue
K & N Air Filter Alternative: Dual-Cone Air Filter - blue, 2.5" inlet
Silicone T Pipe: Silicone T Pipe with 1.25" BOV Port - 2.5" Inlet/Outlet, blue
: NPT Plug, 1/2" NPT Black
Silicone 60: 3.25" Silicone 60° Elbow, Black
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Red
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Black
Engine Antifreeze Adaptor: AN Tee, -8 AN Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.75"
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Gold/Blue
Air Filter Media: Foam Style Air Filter - blue, 3" inlet
Pipe Reducer: Silicone Reducer, 1.75" to 1.375" - Black
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Black
45 Degree Red Hoses: 2.75" Silicone 45° Elbow, Red
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 135° Bend, 1.5"
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Red
90 degree blue hoses: 3.25" Silicone 90° Elbow, Blue
Engine Coolant Adaptor: AN Tee, -6 AN Black
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Blue
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Black
HKS Style BOV Flange: Universal BOV with HKS Style Flange - Silver (Type 14)
: AN Nut, -8 AN Black
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Silver
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Blue
Tube Reducer: Silicone Reducer, 2.75" to 2.5" - Red
Silicone 180: 3.0" Silicone 180° Elbow, Red
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Gold/Blue
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 107)
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Silver
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2.5" NPS to 1.5" NPS Reducer
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Blue
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Blue
Hump Hose Coupler: 3.25" Silicone Hump Hose, Blue
Silicone Turbo Hoses: 1.75" Silicone Straight Coupler, Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Black
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Black
Custom Aluminum V-Band Intake Flange: 1.5" Aluminum V-Band Clamp Rings (Set of 2)
Silicone Couplers: 4.5" Silicone Straight Coupler, Blue
Turbo Coupler: 1.625" Silicone Hump Hose, Black
Turbo Coupler: 1.75" Silicone Hump Hose, Blue
Stainless Steel : 1' Straight Stainless Steel Pipe, 2.25"
Stainless Steel Tube Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.625"
: AN Bulkhead Adaptor, -6 AN Black
Red Hump Hose: 2.25" Silicone Hump Hose, Red
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Black
Turbo Coupler: 2.5" Silicone Hump Hose, Red
Fiberglass Header Wrap: 2" X 100' Fiberglass Exhaust/Header Wrap, Blue
T-bolt clamp shop kit: Stainless Steel T-Bolt Clamp Shop Kit
Commercial Garden Hose: Industrial 3/4" garden hose kit (Per 10 Ft.)
Red Hump Hose Couplers: 2.75" Silicone Hump Hose, Red
: AN Nut, -6 AN Silver
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Silver
Header Wrap: 2" X 50' Double Thick Exhaust/Header Wrap, White
Silicone 180: 2.0" Silicone 180° Elbow, Blue
Tube Reducer: Silicone Reducer, 2.5" to 2.0" - Red
: Stainless Steel Line 45° Adaptor, -4 AN Silver
Intake Pressure Tester: Intake Pressure Tester, 2.5" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.5" - Black
Intake Pressure Tester: Intake Pressure Tester, 1.5" - Blue
Intake Pressure Tester: Intake Pressure Tester, 1.5" - Black
Intake Pressure Tester: Intake Pressure Tester, 1.75" - Black
Intake Pressure Tester: Intake Pressure Tester, 2.0" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.0" - Black
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -10 AN Lines (5 Pack)
Intake Pressure Tester: Intake Pressure Tester, 1.75" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.25" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.25" - Black
Liquid to air adapters: Brass 3/4" Barbed to 3/4" Barbed Straight
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 3.0" V-Band Merge Collector with Flange
Intake Pressure Tester: Intake Pressure Tester, 2.75" - Black
Intake Pressure Tester: Intake Pressure Tester, 3.0" - Blue
Silicone 135: 3.0" Silicone 135° Elbow, Red
Intake Pressure Tester: Intake Pressure Tester, 3.0" - Black
Intake Pressure Tester: Intake Pressure Tester, 2.75" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.25" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.25" - Black
Intake Pressure Tester: Intake Pressure Tester, 3.5" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.5" - Black
Intake Pressure Tester: Intake Pressure Tester, 4.0" - Blue
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -4 AN Lines (5 Pack)
Intake Pressure Tester: Intake Pressure Tester, 4.0" - Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 45°Long
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.5"
Water to air fittings: Brass 1" NPT Male to 1" Barbed Straight
Pipe Reducer: Silicone Reducer, 3.25" to 2.25" - Black
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Silver
: AN Straight Union, -6 AN Silver
Worm Gear Clamps: Stainless Steel Worm Gear Clamp Shop Kit
Exhaust Manifold Heat Wrap: 1" X 50' Fiberglass Exhaust/Header Wrap, Tan
Silicone 135: 2.75" Silicone 135° Elbow, Blue
Worm Gear Clamps: Stainless Steel 4.5" Worm Gear Clamp (95-120mm)
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 45° Bend, 1.5"
Engine Coolant Adaptor: AN Tee, -6 AN Silver
Water Injection Tap: Stainless Steel Joiner with Water Injection/Probe Taps, 3.0"
Forge Style BOV Flange: Universal BOV with Easy Installation - Silver (Type 9)
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 90° Bend, 1.5"
Pipe Reducer: Silicone Reducer, 3.75" to 2.75" - Black
Methanol Fuel Line: AN Straight Union, -8 AN Black
Worm Gear Clamps: Stainless Steel 2" Worm Gear Clamp (33-57mm)
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T4 Merge Collector
Pipe Reducer: Silicone Reducer, 3.75" to 3.25" - Blue
Methanol Fuel Line: AN Female to Female Union, -6 AN Black
WRX Style BOV Flange: Universal BOV with WRX Style Flange - Silver (Type 12)
AN Lines Pressure Tester: AN to NPT Female Adaptor, -8 AN to 1/8''-27 NPTF Silver
TurboXS Style BOV Flange: Universal Beehive Style BOV - Silver (Type 13)
1/2" NPT Full Port Brass Ball Valve: Brass 1/2" NPT Female to 1/2" NPT Male Full Port Ball Valve
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 1' Straight
: AN Bulkhead Adaptor, -6 AN Silver
Methanol Fuel Line: AN Straight Union, -10 AN Black
T4 Stainless Steel Turbo Divided Inlet Gasket: Stainless Steel Gasket, T4 Turbo (Divided)
Methanol Fuel Line: AN Female to Female Union, -8 AN Black
Pipe Reducer: Silicone Reducer, 1.75" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 1.375" to 1.0" - Black
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, Tee
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.75"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.25"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 3.0"
: NPT Plug, 1/8" NPT Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Silver
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Red
3.5" Blue Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Blue
Silicone Hose: 2.0" Silicone 1' Straight Hose, Blue
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Red
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Blue
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Red
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Black
Pipe Reducer: Silicone Reducer, 2.75" to 1.75" - Blue
EVO 8 T-Bolt Clamps: SaytheB EVO 10 T-Bolt Clamp Kit
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Blue
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Silver
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 1' Straight
Stainless Steel Tube Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.625"
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Silver
Water to air fittings: 4AN brass ring
Silicone 45: 1.0" Silicone 45° Elbow, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS to 1.25" NPS Reducer
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Black
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 1' Long
: AN 45° Union, -8 AN Black
Silicone 60: 4.5" Silicone 60° Elbow, Blue
Silicone 60: 4.5" Silicone 60° Elbow, Black
Silicone 60: 1.625" Silicone 60° Elbow, Blue
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.375"
EVO 8 T-Bolt Clamps: Cajun Power EVO 7, 8, 9 T-Bolt Clamp Kit
Reducer Elbow: Silicone Reducer, 45° bend - 2.75" to 2.5" - Blue
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Red
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.625"
: AN to NPT Adaptor, -10 AN to 3/8" NPT Silver
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.5"
: Stainless Steel Line 45° Adaptor, -4 AN Red/Blue
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Blue
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Silver
Silicone 30: 1.0" Silicone 30° Elbow, Black
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.5"
Silicone 30: 1.25" Silicone 30° Elbow, Blue
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.625"
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Black
Silicone 45: 1.25" Silicone 45° Elbow, Blue
Silicone 30: 1.625" Silicone 30° Elbow, Blue
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.25" - Blue
Bending Reducer: Silicone Reducer, 90° bend - 3.25" to 2.5" - Blue
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.5" - Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Silver
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Red
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Red
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Gold/Blue
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Silver
Aftermarket Brake Lines: AN Plug, -6 AN Black
Exhaust Heat Wrap: 1" X 50' Double Thick Exhaust/Header Wrap, White
Silicone 30: 1.625" Silicone 30° Elbow, Black
Silicone 60: 1.625" Silicone 60° Elbow, Black
Engine Coolant Adaptor: AN Tee, -6 AN Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 180°Long
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Silver
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Blue
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Red
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 135° Bend, 2.25"
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 135° Bend, 2.0"
: AN to NPT Adaptor, -12 AN to 3/8" NPT Silver
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Red/Blue
Silicone 30: 3.25" Silicone 30° Elbow, Blue
Silicone 60: 3.25" Silicone 60° Elbow, Blue
Water to air fittings: Brass 1/4" NPT Male to 3/8" Barbed Straight
Water to air fittings: Brass 3/8" NPT Male to 10mm Barbed Straight
Mandrel SS Thick: 1' Straight Extra Thick Stainless Steel Pipe, 2.5"
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 135° Bend, 2.75"
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 45° Bend, 1.5"
Silicone 30: 3.5" Silicone 30° Elbow, Blue
Silicone 60: 3.5" Silicone 60° Elbow, Blue
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Silver
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Black
Silicone 45: 3.25" Silicone 45° Elbow, Blue
Bending Reducer: Silicone Reducer, 45° bend - 3.5" to 2.5" - Blue
Mandrel SS: 2' Mandrel Bent Stainless Steel 135° Bend, 3.0"
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Black
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 2.5" - Blue
Air to water fittings: Brass 3/4" NPS Male to 3/4" Barbed Straight
: AN Bulkhead Adaptor, -4 AN Silver
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Black
Turbo Coupler: 1.0" Silicone Hump Hose, Black
Silicone 135: 2.25" Silicone 135° Elbow, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, Tee
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 135° Bend, 2.0"
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Blue
Water to air fittings: Brass 3/4" NPT Male to 1" Barbed 90 Elbow
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Gold/Blue
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 4.5"
Stainless Steel : 2' Mandrel Bent Stainless Steel 135° Bend, 2.25"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, Tee
Turbo Coupler: 3.5" Silicone Hump Hose, Red
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Red
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 135° Bend, 2.75"
Turbo Coupler: 1.25" Silicone Hump Hose, Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, Tee
Silicone Turbo Hoses: 1.25" Silicone Straight Coupler, Blue
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.5"
Exhaust Heat Wrap: 2" X 50' Fiberglass Exhaust/Header Wrap, Tan
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.5"
AN Lines Pressure Tester: AN to NPT Female Adaptor, -4 AN to 1/8''-27 NPTF Silver
Tube Reducer: Silicone Reducer, 3.0" to 2.75" - Red
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Black
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.625"
Pipe Reducer: Silicone Reducer, 3.75" to 2.75" - Blue
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 135° Bend, 1.5"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 180°Long
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, Tee
Pipe Reducer: Silicone Reducer, 3.75" to 3.5" - Blue
Methanol Fuel Line: AN Female to Female Union, -6 AN Silver
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Red
Pipe Reducer: Silicone Reducer, 4.0" to 3.75" - Blue
Header Wrap: 2" X 50' Fiberglass Exhaust/Header Wrap, Blue
Exhaust wrap to minimize fatigue: 2" X 50' Fiberglass Exhaust/Header Wrap, Black
: AN Plug, -4 AN Silver
Downpipe Gasket 2.5" GT series/T3 Turbo: Stainless Steel Gasket GT series/T3 Turbo Discharge, 2.5"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, Tee
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.625"
Air Filter Media: Foam Style Air Filter - blue, 3.5" inlet
Pipe Reducer: Silicone Reducer, 1.625" to 1.125" - Black
Methanol Fuel Line: AN Female to Female Union, -10 AN Silver
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 3.5"
Pipe Reducer: Silicone Reducer, 1.875" to 1.25" - Black
Stainless Steel Tube: 1' Straight Stainless Steel Pipe, 2.0"
Air Filter Media: Foam Style Air Filter - blue, 2.5" inlet
Gasket for V-Band Assembly: Gasket for 2.75" Aluminum V-Band Assembly
Pipe Reducer: Silicone Reducer, 3.5" to 3.0" - Red
Water to air fittings: Brass 1/8" NPT Male to 6mm Barbed Straight
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Blue
: AN Nut, -6 AN Blue
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 10" Long
3.5" air filter: Air Filter with Splash Guard - Carbon Fiber, 3.5" inlet
Pipe Reducer: Silicone Reducer, 2.5" to 2.25" - Red
: AN 45° Union, -6 AN Black
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 135° Bend, 2.0"
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Black
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.625"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 180°Long
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Black
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Silver
: AN Tee, -4 AN Black
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Silver
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Red/Blue
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Red/Blue
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Red/Blue
: AN Nut, -12 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Silver
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.75"
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Red/Blue
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Gold/Blue
Mandrel SS: 1' Mandrel Bent Stainless Steel 135° Bend, 3.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.75"
Pipe Reducer: Silicone Reducer, 2.0" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.375" - Black
Air to water adapters: Brass 3/4" NPS Female to 3/4" Barbed Straight Swivel
Pipe Reducer: Silicone Reducer, 1.875" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.125" - Black
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Red/Blue
: AN Plug, -12 AN Silver
T25/T28 Turbo Flange: Stainless Steel Flange, T25/T28 Turbo
3.0" Blue Turbo Intake Aluminum Velocity Stack: 3.0" Aluminum Velocity Stack, Blue
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Silver
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Black
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Black
Tube Reducer: Silicone Reducer, 2.25" to 2.0" - Red
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 135° Bend, 2.5"
Methanol Fuel Line: AN Straight Union, -6 AN Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Red/Blue
K and N Air Filter Alternative: Dual-Cone Air Filter - blue, 3.5" inlet
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Red/Blue
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Red/Blue
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Gold/Blue
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Red/Blue
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Silver
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Gold/Blue
3.5" Silver Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Black
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 180° Bend, 2.25"
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Gold/Blue
Silicone Couplers: 3.75" Silicone Straight Coupler, Blue
: AN Straight Union, -10 AN Silver
: AN Bulkhead Adaptor, -6 AN Blue
: AN Bulkhead Adaptor, -12 AN Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Blue
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Gold/Blue
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Silver
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Black
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 8" Long
Methanol Fuel Line: AN Female to Female Union, -8 AN Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Silver
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -12 AN Lines (5 Pack)
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Gold/Blue
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Silver
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Silver
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Silver
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Gold/Blue
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 180° Bend, 2.75"
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Red/Blue
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Gold/Blue
Worm Gear Clamps: Stainless Steel 6" Worm Gear Clamp (143-165mm)
Engine Antifreeze Adaptor: AN Tee, -8 AN Silver
Engine Antifreeze Adaptor: AN Tee, -8 AN Blue
Fuel Pump Mounting Bracket: 2.5" Aluminum Water/Fuel Pump Mounting Bracket, Black
Worm Gear Clamps: Stainless Steel 4.75" Worm Gear Clamp (103-127mm)
: Stainless Steel Line 180° Adaptor, -4 AN Black
: AN Female to Female Union, -4 AN Silver
: AN Female to Female Union, -4 AN Blue
: AN Female to Female Union, -4 AN Black
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.875"
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Gold/Blue
: Stainless Steel Line 45° Adaptor, -4 AN Gold/Blue
: Stainless Steel Line 90° Adaptor, -4 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Gold/Blue
: Stainless Steel Line 90° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Black
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Black
Upgraded Brake Fluid Line: AN Tee, -10 AN Blue
Upgraded Brake Fluid Line: AN Tee, -10 AN Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS to 1.5" NPS Reducer
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Silver
: Stainless Steel Line 180° Adaptor, -4 AN Gold/Blue
: Stainless Steel Line 180° Adaptor, -4 AN Silver
: Stainless Steel Line 180° Adaptor, -4 AN Red/Blue
Silicone Turbo Hoses: 3.25" Silicone Straight Coupler, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2.0" NPS, 45°Long
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Red/Blue
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Blue
Water Pump Mounting Bracket: 2.0" Pump Mounting Kit
Bosch 044 Fuel Pump Mounting Bracket: 2.25" Pump Mounting Kit
: AN Tee, -12 AN Silver
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS to 1" NPS Reducer
Fuel Pump Mounting Bracket: 2.5" Pump Mounting Kit
Oil Pump Mounting Bracket: 2.75" Pump Mounting Kit
: AN Tee, -12 AN Blue
Silicone Turbo Hoses: 2.0" Silicone Straight Coupler, Red
Automotive Pump Mounting Bracket: 3.0" Pump Mounting Kit
Fuel Pump Mounting Bracket: 3.5" Pump Mounting Kit
: AN Tee, -12 AN Black
Water Pump Mounting Bracket: 3.25" Pump Mounting Kit
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Gold/Blue
Oil Pump Mounting Bracket: 3.75" Pump Mounting Kit
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 90°Long
Automotive Pump Mounting Bracket: 4.0" Pump Mounting Kit
Water Pump Mounting Bracket: 4.25" Pump Mounting Kit
Fuel Pump Mounting Bracket: 4.75" Pump Mounting Kit
Oil Pump Mounting Bracket: 5.25" Pump Mounting Kit
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.25"
Electric exhaust cutout bypass motor: AllFlow Electrically Controlled Valve Control Motor
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS to 1.25" NPS Reducer
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Silver
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 45°Long
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 90°Long
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS to 1.25" NPS Reducer
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.25"
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Silver
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Blue
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Silver
Silicone Turbo Hoses: 1.0" Silicone Straight Coupler, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 45°Long
: AN 45° Union, -12 AN Silver
: AN 45° Union, -12 AN Blue
: AN 90° Union,-12 AN to -12 AN Blue
: AN 45° Union, -12 AN Black
: AN 90° Union,-12 AN to -12 AN Silver
: AN Female to Female Union, -12 AN Silver
Methanol Fuel Line: AN Female to Female Union, -12 AN Blue
: AN 90° Union,-12 AN to -12 AN Black
Methanol Fuel Line: AN Female to Female Union, -12 AN Black
: AN Nut, -4 AN Black
: AN Plug, -4 AN Blue
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Silver
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Blue
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Black
: AN Plug, -4 AN Black
T3 T3/T4 Stainless Steel Turbo Divided Inlet Gasket: Stainless Steel Gasket, T3 T3/T4 Turbo (Divided)
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Silver
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Blue
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Silver
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Silver
: AN Bulkhead Adaptor, -8 AN Silver
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Black
1/8"-27 NPT Male to 5/16"-32 NPT Female Adaptor: Brass 1/8"-27 NPT Male to 5/16"-32 NPT Female Adaptor
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Silver
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Silver
: AN Nut, -8 AN Silver
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Silver
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Silver
Water to air fittings: Brass 1/4" NPT Male to 6mm Barbed Straight
: NPT Plug, 3/8" NPT Blue
Clutch Fluid Line: AN Plug, -10 AN Blue
Clutch Fluid Line: AN Plug, -10 AN Black
: NPT Plug, 3/8" NPT Black
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Black
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Silver
: AN 45° Union, -10 AN Silver
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Silver
: AN Nut, -4 AN Silver
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Blue
: AN Straight Union, -4 AN Silver
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Black
Coolant System and Head Gasket Pressure Test Valve: Chrome 1-1/2" tire valve for 0.453" rim hole (TR414-C)
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Gold/Blue
Methanol Fuel Line: AN Female to Female Union, -10 AN Black
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.0"
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 4.0"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 3.5"
: NPT Plug, 1/8" NPT Silver
: AN Bulkhead Adaptor, -8 AN Blue
: AN Bulkhead Adaptor, -4 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Blue
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Blue
: AN 90° Union,-4 AN to -4 AN Blue
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Blue
: AN 45° Union, -6 AN Silver
Methanol Fuel Line: AN Straight Union, -12 AN Blue
: AN 45° Union, -6 AN Blue
AN Lines Pressure Tester: AN to NPT Female Adaptor, -12 AN to 1/8''-27 NPTF Silver
Methanol Fuel Line: AN Straight Union, -12 AN Black
: NPT Plug, 1/4" NPT Silver
: NPT Plug, 1/4" NPT Blue
: AN Nut, -8 AN Blue
: NPT Plug, 1/4" NPT Black
Braided Stainless Steel Hose: AN Plug, -8 AN Blue
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.0"
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Blue
Water to air fittings: Brass 1/4" NPT Male to 4mm Barbed Straight
: AN Nut, -10 AN Blue
Water to air fittings: Brass 1/8" NPT Male to 3/8" Barbed Straight
Water to air fittings: Brass 1/4" NPT Male to 8mm Barbed Straight
: AN Nut, -10 AN Silver
: AN Nut, -10 AN Black
: NPT Plug, 3/8" NPT Silver
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Silver
Water to air fittings: Brass 3/8" NPT Male to 4mm Barbed Straight
: AN Tee, -4 AN Silver
Water to air fittings: Brass 3/8" NPT Male to 3/8" Barbed Straight
Water to air fittings: Brass 3/8" NPT Male to 6mm Barbed Straight
Water to air fittings: Brass 3/8" NPT Male to 8mm Barbed Straight
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Blue
: AN Tee, -4 AN Blue
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Silver
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Blue
: AN 45° Union, -10 AN Black
: Stainless Steel Line Straight Adaptor, -4 AN Gold/Blue
: AN 45° Union, -10 AN Blue
Liquid Air Adapter: Water I/O 90° 5/8" Adapter for Water to Air Intercoolers
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Silver
: AN Nut, -12 AN Silver
: AN Bulkhead Adaptor, -10 AN Silver
: AN Nut, -12 AN Blue
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Silver
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Silver
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Silver
Methanol Fuel Line: AN Straight Union, -4 AN Blue
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Blue
: AN Bulkhead Adaptor, -10 AN Blue
Methanol Fuel Line: AN Straight Union, -4 AN Black
: AN Bulkhead Adaptor, -10 AN Black
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Black
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Blue
: NPT Plug, 3/4" NPT Black
: NPT Plug, 1/2" NPT Silver
: AN Plug, -12 AN Blue
: NPT Plug, 1/2" NPT Blue
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Silver
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Blue
: AN Plug, -12 AN Black
Aluminum One-Way Check Valve -3AN: Aluminum One-Way Check Valve, -3AN Silver
Water to air fittings: Brass 3/4" NPT Male to 1" Barbed Straight
: AN Bulkhead Adaptor, -4 AN Blue
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Silver
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Silver
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Blue
Methanol Fuel Line: AN Female to Female Union, -8 AN Silver
: AN 90° Union,-4 AN to -4 AN Silver
: AN 45° Union, -4 AN Blue
: AN 45° Union, -4 AN Black
: AN 90° Union,-4 AN to -4 AN Black
: AN 45° Union, -4 AN Silver
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Blue
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Silver
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Blue
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Silver
: AN Straight Union, -8 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Silver
Methanol Fuel Line: AN Straight Union, -8 AN Blue
: AN 45° Union, -8 AN Silver
: AN 45° Union, -8 AN Blue
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Silver
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Black
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Blue
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Blue
: AN Bulkhead Adaptor, -12 AN Silver
Methanol Fuel Line: AN Straight Union, -10 AN Blue
: AN Bulkhead Adaptor, -12 AN Blue
: NPT Plug, 3/4" NPT Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Silver
: NPT Plug, 3/4" NPT Silver
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Silver
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Silver
Methanol Fuel Line: AN Female to Female Union, -6 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Blue
Worm Gear Clamps: Stainless Steel 5" Worm Gear Clamp (118-140mm)
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Silver
Gasket for V-Band Assembly: Gasket for 2.25" Aluminum V-Band Assembly
Gasket for V-Band Assembly: Gasket for 1.5" Aluminum V-Band Assembly
Coolant System and Head Gasket Pressure Test Valve: Chrome 1-1/4" tire valve for 0.453" rim hole (TR413-C)
Worm Gear Clamps: Stainless Steel 6.5" Worm Gear Clamp (155-178mm)
Coolant System and Head Gasket Pressure Test Valve: Standard 1-1/4" tire valve for 0.453" rim hole (TR413)
Coolant System and Head Gasket Pressure Test Valve: Standard 1-1/2" tire valve for 0.453" rim hole (TR414)