Air to Water Intercooler Special Pages Index

This is for internet marketing purposes and might not be very useful!

Contact Us Through Facebook: Nope: Get your Auto Parts with few civil rights violations.

Privacy Policy
Shipping Policy
Secure Shopping
Safe Shopping Guarantee
Scammers and Phishing Attempts: Avoid Scammers and Phishing Attempts
Intercooler Pipe Fabrication, AN Fittings and Stainless Steel Lines, Water/Air, and Aluminum Pipes: Intercooler Pipe Fabrication, AN Fittings and Stainless Steel Lines, Water/Air, and Aluminum Pipes
Which to choose: Aluminum or Stainless Steel?: Aluminum or Stainless Steel - What
AN Fittings and Stainless Steel Lines: What size are they, really?: AN Fittings and Stainless Steel Lines: What size are they, really?
New Website for AN Fittings: AN Fittings For Sale Here!
BOV Myths and Adjustment: Read before installing your aftermarket BOV!
How shipping is calculated: Calculate Turbo Parts Shipping Cost right here.
About phone orders: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Intercooler End Tank Modification
Engine Cooling System
Why You Need to Run Ethanol / E85 Right Now: Why You Need to Run Ethanol / E85 Right Now
FAQ about our service: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
FAQ: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Page about our shipping methods.: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.

Our Forza 2 Sponsorships: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About our new website: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Career Oppertunities: Help us design the next Charge Air Cooler!
Aluminum Pipes, Stainless Steel Pipes, and Exhaust Parts: Aluminum Pipes, Stainless Steel Pipes, and Exhaust Parts - you want them? we got them.
AN Fittings and Stainless Steel Lines: AN Fittings and Stainless Steel Lines
Text from our Homepage: Air to Water Intercooler and more! WWW.FROZENBOOST.COM
Text from our Homepage: Your source for Intercooler Pipe Fabrication Parts
Our In Stock Guarantee: Silicone Parts Always In Stock!
Intercooler hoses business: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Making a Silicone Intake: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Largest shipper in Fountain CO: Trying to build your own DIY Cold Air Intake? Look no farther.
Portable garages and engine treatment: Portable garages and engine treatment
Picking up in Colorado Springs: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Our Low Price Guarantee: Shop Here for the Lowest Price on Silicone Couplers!

New business hours: Silicon parts and more at www.siliconeintakes.com.
Aluminum Intake Piping Fitment Guide: AluAluminum Intake Piping Fitment Guide
Enter the Pre-Intercooler Cooling Pipe: Enter the Pre-Intercooler Cooling Pipe
PTFE / Teflon - The Right Way To Go: PTFE / Teflon Stainless Steel Lines - The Right Way To Go
Removal Links for UK: Removal Links for UK
Stickers currently available: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Stickers Coming Soon: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Post Office Reliability: Check here for reinforced silicone couplers.
Our return policy: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About our Secure Shopping Guarantee: Our Secure Shopping Guarantee is simple and effective.
Benefits of a Silicone Intake: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
Changes to some of our policies: We have the silicone boot you are looking for.
Our new shipping rates: Get your silicone couplet here.
Using our shopping cart: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
About Silicone Intake Components: Silicon intake parts are very effective.
How to get a sponsorship for your car: How to get a sponsorship for your car
Shipping Updates: Check here for Turbocharger Parts - installation and upgrades
EBay, VeRO, and how it damages the consumer: EBay, VeRO, and how it damages the consumer
Benefits of Water to Air: Buy your Water to Air Intercooler Kit here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.
FAQ about water/air intercooling: Buy your Water to Air Heat Exchanger here. A Water to Air Intercooler setup is similar in principle to a traditional air to air setup, except that there is water passing through the core of the intercooler instead of air which is responsible for drawing the heat out of the intake air. There are many benefits of using a water to air intercooler setup.

Air to Water Intercooler Categories Index

This is for internet marketing purposes and might not be very useful!

Liquid Air Intercooler: Liquid Air Intercooler
Air/Water IC: Air/Water IC
Water to Air Heat Exchanger: Water to Air Heat Exchanger
Liquid Air Adapter: Liquid Air Adapter
Front Mount Intercooler: Front Mount Intercooler
Stainless Steel Teflon Fuel Lines: Stainless Steel Teflon Fuel Lines
Aluminum Pipes: Aluminum Pipes
High Performance Red Air Filters: High Performance Red Air Filters
T Bolt Clamp: T Bolt Clamp
Intake Pipe Reducer: Intake Pipe Reducer
30 Silicone Bends: 30 Silicone Bends
Turbocharger Part: Turbocharger Part
60 Silicone Bends: 60 Silicone Bends
Holset Turbocharger: Holset Turbocharger
135 Degree Bends: 135 Degree Bends
180 Silicone Bends: 180 Silicone Bends
Hump Hose: Hump Hose
Silicone Hose: Silicone Hose
Bending Reducer: Bending Reducer
Intake Leak Pressure Tester: Intake Leak Pressure Tester
Turbo Piping: Turbo Piping
DSM Intercooler Piping: DSM Intercooler Piping
BOV: BOV
Prosport Digital Gauges: Prosport Digital Gauges

Air to Water Intercooler Products Index

This is for internet marketing purposes and might not be very useful!

How to prevent header rust: 6" X 100' Fiberglass Exhaust/Header Wrap, Blue
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 16x12.5x4.5, S/S I/O (Type 52)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 17x12.25x9, S/S I/O (Type 53)
Fiberglass Header Wrap: 6" X 100' Fiberglass Exhaust/Header Wrap, Tan
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 11"x9"x3.5" - S/S I/O (Type 50)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 12x12.25x4.5, S/S I/O (Type 51)
150 PSI Water to Air Intercooler: Water to Air Intercooler, 150PSI 20.25x15.5x12 S/S I/O (Type 54)
Carbon Fiber 45: 3.5" Carbon Fiber 45° Elbow
Carbon Fiber Hose: 2.5" Carbon Fiber 2' Straight Hose
Carbon Fiber 45: 2.5" Carbon Fiber 45° Elbow
Prosport IAT/Intake Air Temperature Digital Gauge: Prosport Dual Intercooler Air Temperature Gauge Digital Display-52mm
Carbon Fiber 45: 3" Carbon Fiber 45° Elbow
Carbon Fiber Hose: 3" Carbon Fiber 2' Straight Hose
Prosport Wideband Air Fuel Ratio Digital Gauge: Prosport Wideband Air/Fuel Ratio w/Sensor Digital Display-52mm
Stainless Steel Exhaust Gasket: Stainless Steel Gasket, 5-bolt
Carbon Fiber 90: 3.5" Carbon Fiber 90° Elbow
Carbon Fiber 90: 3" Carbon Fiber 90° Elbow
Prosport Boost Digital Gauge: Prosport Boost Gauge Digital Display-52mm
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Black
Prosport IAT/Intake Air Temperature Digital Gauge: Prosport Intake Temperature Gauge Digital Display-52mm
Prosport Oil Pressure Digital Gauge: Prosport Oil Pressure Gauge Digital Display-52mm
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Black
Prosport Volt Digital Gauge: Prosport Volt Gauge Digital Display-52mm
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Black
Long Flow Style Water to Air Intercooler: Water to Air Intercooler, 13.5"x4"x3.5", Long Flow (Type 20)
Silicone 90: 3.0" Silicone 90° Elbow, Black
02 Sensor Plug Bolt: O2 Sensor Plug, M18x1.5
Liquid to Air: Water to Air Intercooler - 16"x12.5"x4.5" - S/S I/O (Type 5)
Long Flow Style Water to Air Intercooler: Water to Air Intercooler, 15"x 6.5"x 6", Long Flow (Type 26)
T Band Clamp: T-Bolt Clamp for 3.0" Silicone Parts
Pipe Reducer: Silicone Reducer, 4.5" to 4.0" - Black
Air to Water Heat Exchanger: Water to Air Intercooler Radiator - 26x7x3.5 (Type 101)
Silicone 90: 2.5" Silicone 90° Elbow, Black
Air to Water Radiator: Water to Air Intercooler Radiator - 26x7x2 (Type 118)
Hose Clamp: T-Bolt Clamp for 2.5" Silicone Parts
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 3.0"
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", S/S I/O (Type 12)
Water to Air Intercoolers: Water to Air Intercooler, 16.5"x12.25"x4.5", Thru I/O (Type 17)
Air to Water Radiator: Water to Air Intercooler Radiator - 24x12x1 (Type 100)
Aluminum Pipe: 2' Straight Aluminum Pipe, 4.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.5"
Water to Air Ice Box Reservoir: Water to Air Ice Box Reservoir
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.5"
T Bolt Hose Clamp: T-Bolt Clamp for 4.0" Silicone Parts
Silicone 90: 4.0" Silicone 90° Elbow, Black
Aluminum Pipe: 2' Straight Aluminum Pipe, 3.0"
Long Flow Style Water to Air Intercooler: Water to Air Intercooler - 14.5"x5"x4.5", Long Flow (Type 19)
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 3.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 3.0"
Water to Air Intercoolers: Water to Air Intercooler, 12.25"x12.25"x4.5", Bend I/O (Type 14)
Black Bend: 2.0" Silicone 90° Elbow, Black
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", Through I/O (Type 22)
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 4.0"
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Black
Tube Reducer: Silicone Reducer, 3.5" to 3.0" - Black
Tube Reducer: Silicone Reducer, 3.0" to 2.75" - Black
Silicone Hose: 3.0" Silicone 1' Straight Hose, Black
Silicone Turbo Hoses: 3.0" Silicone Straight Coupler, Black
Water To Air: Water to Air Intercooler - 12"x12.25"x4.5" - S/S I/O (Type 3)
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Black
Small Liquid/Air Intercooler: Water to Air Intercooler - 11"x9"x3.5" - S/S I/O (Type 9)
Fiberglass Header Wrap: 6" X 50' Fiberglass Exhaust/Header Wrap, Tan
Exhaust Clamp: T-Bolt Clamp for 3.5" Silicone Parts
Water to Air Intercoolers: Water to Air Intercooler, 20.25"x15.5"x12", S/S I/O (Type 27)
Silicone Turbo Hoses: 2.5" Silicone Straight Coupler, Black
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Black
Silicone 45: 4.0" Silicone 45° Elbow, Black
V Band Clamps: 3.0" Stainless Steel V-Band Clamp Rings (Set of 2)
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 4.0"
Silicone 45: 4.5" Silicone 45° Elbow, Black
Water to Air Intercoolers: Water to Air Intercooler, 16.25"x12.25"x4.5", Bend I/O (Type 15)
T Bolt Clamp: T-Bolt Clamp for 2.0" Silicone Parts
Silicone Boost Vacuum Hose: 4mm Black Silicone Boost/Vacuum Hose Per Ft.
High Temperature Water Hose: 3/4"(19mm) ID water hose, black (per foot)
Silicone 45: 3.0" Silicone 45° Elbow, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 3.0"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.5"
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Black
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x10" (Type 25)
Silicone Turbo Hoses: 4.0" Silicone Straight Coupler, Black
V Band Exhaust Clamp: 3.0" V-Band Clamp
Remote Radiator Filler Cap: Remote Radiator Inline Filler Cap - 3/4"
Aftermarket Boost Vacuum Hose: 6mm Black Silicone Boost/Vacuum Hose Per Ft.
Pipe Reducer: Silicone Reducer, 5.0" to 4.0" - Black
Tube Reducer: Silicone Reducer, 3.0" to 2.5" - Black
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 3.5"
Aluminum Pipe: 2' Straight Aluminum Pipe, 3.5"
Silicone 135: 3.0" Silicone 135° Elbow, Black
Silicone Hose: 4.0" Silicone 2' Straight Hose, Black
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Black
Air to Water Radiator: Water to Air Intercooler Radiator - 12x12x2 (Type 117)
Silicone 90: 3.5" Silicone 90° Elbow, Black
Reducer Elbow: Silicone Reducer, 90° bend - 2.25" to 2.0" - Black
Water to Air Intercoolers: Water to Air Intercooler, 150 PSI 17"x12.25"x9", Through I/O (Type 55)
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 3.5"
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Black
Band Clamp: T-Bolt Clamp for 2.75" Silicone Parts
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.5"
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.0" - Black
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.0" - Black
Silicone 45: 2.5" Silicone 45° Elbow, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 90°Short
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 4.0"
Silicone Hose: 3.0" Silicone 2' Straight Hose, Black
Pipe Reducer: Silicone Reducer, 4.0" to 3.75" - Black
90 Degree Black Hoses: 2.75" Silicone 90° Elbow, Black
Turbo Coupler: 2.0" Silicone Hump Hose, Blue
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2.5"
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 114)
Silicone 30: 2.5" Silicone 30° Elbow, Black
V Bolt Clamp: 2.5" V-Band Clamp
Silicone Turbo Hoses: 2.0" Silicone Straight Coupler, Black
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 4.0" - Black
Intercooler Fans: 7" Radiator Fan with Mounting Kit
: Silicone Port System
Heat Exchanger: Intercooler - 31"x11.75"x4" - 3" Inlet/Outlet (Type 2)
Silicone 90: 1.5" Silicone 90° Elbow, Black
Silicone Elbow: 2.25" Silicone 90° Elbow, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.0"
Mandrel SS: 2' Mandrel Bent Stainless Steel 90° Bend, 3.0"
Tube Reducer: Silicone Reducer, 2.5" to 2.0" - Black
Silicone Hose: 2.5" Silicone 2' Straight Hose, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 3.5"
Turbo Intercooler: Intercooler - 31"x11.75"x3" - 3" Inlet/Outlet (Type 0)
T Bolt: T-Bolt Clamp for 2.25" Silicone Parts
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 90° Bend, 2.5"
WPT717 Bosch Pump Harness: Bosch Cobra Water Pump Wiring Harness
Stainless Steel Piping: Mandrel Bent Aluminum 45/180 Bend, 2.5"
Silicone Hose: 2.0" Silicone 2' Straight Hose, Black
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Black
Automotive Pump Mounting Bracket: Pump Mounting Bracket
Top to Bottom Intercooler: Intercooler - 19.75x12x3.5, 2.5" I/O, Top to Bottom (Type 11)
DIY Intercooler Piping: Stainless Steel Joiner, 2.5"
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.5"
High Flow Cat: AllFlow Test Pipe, Mild Steel - 3"
Turbo Coupler: 3.0" Silicone Hump Hose, Black
Tube Reducer: Silicone Reducer, 3.0" to 2.0" - Black
Black Elbow: 2.0" Silicone 45° Elbow, Black
Water to Air Intercoolers: Water to Air Intercooler - 11"x9.25"x3.5" - Bend I/O (Type 13)
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 3"
Silicone 90: 1.0" Silicone 90° Elbow, Black
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2.5"
Mandrel SS Thick: 2' Extra Thick Stainless Steel 180° Bend, 2.5"
Mandrel SS: 2' Straight Stainless Steel Pipe, 3.0"
90 degree blue hoses: 3.0" Silicone 90° Elbow, Blue
Tube Reducer: Silicone Reducer, 3.5" to 2.5" - Black
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 180° Bend, 2.0"
T6 Turbo Flange: Stainless Steel Flange, T6 Turbo
Mandrel SS: 2' Mandrel Bent Stainless Steel 45° Bend, 3.0"
Silicone 90: 4.0" Silicone 90° Elbow, Blue
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 3.0"
Silicone Boost Vacuum Hose: 10mm Black Silicone Boost/Vacuum Hose Per Ft.
Front Mount Intercooler: Intercooler - 31"x11.75"x3" - 2.5" Inlet/Outlet (Type 1)
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.25"
Pipe Reducer: Silicone Reducer, 4.0" to 2.5" - Black
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x6" (Type 23)
Mandrel SS: 2' Mandrel Bent Stainless Steel 180° Bend, 3.0"
Silicone Boost/Vac Hose: 8mm Black Silicone Boost/Vacuum Hose Per Ft.
Engine Bay Heat Reducer: 2" X 100' Fiberglass Exhaust/Header Wrap, Black
T Bolt Hose Clamp: T-Bolt Clamp for 4.5" Silicone Parts
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 3.0"
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 113)
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 3.0"
Pressure Tester: Intake Pressure Tester, CAP ONLY
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 3.0"
Electric Radiator Fan: 10" Radiator Fan with Mounting Kit
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 3.5"
Silicone Hose: 1.75" Silicone 2' Straight Hose, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.75"
Reducer Elbow: Silicone Reducer, 45° bend - 3.5" to 3.0" - Black
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 3.5" - Black
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 1.75" - Black
Silicone 180: 2.75" Silicone 180° Elbow, Blue
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Black
45 Degree Black Hoses: 2.75" Silicone 45° Elbow, Black
Radiator Cooling Fan: 12" Radiator Fan with Mounting Kit
Mandrel SS: 1' Mandrel Bent Stainless Steel 90° Bend, 3.0"
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.25"
Silicone Turbo Hoses: 2.75" Silicone Straight Coupler, Black
Water to Air Intercoolers: Water to Air Intercooler, 16"x12.25"x4.5", O/S I/O (Type 18)
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 90°Long
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.75"
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.75" - Black
Compact Liquid/Air Intercooler: Water to Air Intercooler - 11"x9"x3.5" - O/S I/O (Type 8)
Water to air fittings: Brass 1/2" NPT Male to 3/4" Barbed Straight
Barrel Water to Air Intercoolers: Barrel Style Liquid to Air Intercooler, 4"x8" (Type 24)
Band Clamp: T-Bolt Clamp for 3.25" Silicone Parts
Pipe Reducer: Silicone Reducer, 2.0" to 1.5" - Black
Silicone 60: 4.0" Silicone 60° Elbow, Black
Turbo Coupler: 2.5" Silicone Hump Hose, Black
Stainless Steel Brake Lines: PTFE Braided Stainless Steel Lines, -6 AN, per ft.
T Bolt Hose Clamp: T-Bolt Clamp for 1.5" Silicone Parts
T3 T3/T4 Turbo Divided Flange: Stainless Steel Divided Flange, T3 T3/T4 Turbo
T3 Turbo Blanket: T3 Turbo Blanket
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 115)
V Band Clamp: 2.0" V-Band Clamp
Aluminum Pipe: 1' Straight Aluminum Pipe, 3.0"
02 Sensor Bung Notched Cut: Stainless Steel O2 Sensor Weld Bung, Notched Style, M18x1.5
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Black
Aluminum Pipe: 1' Straight Aluminum Pipe, 3.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 1.5"
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Black
Silicone 30: 2.0" Silicone 30° Elbow, Black
Silicone Elbow: 2.5" Silicone 90° Elbow, Blue
V Band Clamps: 2.5" Stainless Steel V-Band Clamp Rings (Set of 2)
Liquid/Air: Water to Air Intercooler - 12"x12.25"x4.5" - O/S I/O (Type 4)
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 90°Long
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.5"
Tube Reducer: Silicone Reducer, 3.5" to 2.75" - Black
Silicone Turbo Hoses: 1.5" Silicone Straight Coupler, Black
Black Hump Hose Couplers: 2.75" Silicone Hump Hose, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 3.5"
V Band Clamps: 3.0" Mild Steel V-Band Clamp Rings (Set of 2)
Tube Reducer: Silicone Reducer, 2.75" to 2.5" - Black
Silicone 45: 3.5" Silicone 45° Elbow, Black
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Black
Reducer Elbow: Silicone Reducer, 45° bend - 2.75" to 2.5" - Black
: Stainless Steel Line 90° Adaptor, -4 AN Black
Heat Exchanger: Intercooler - 29"x6"x2.5" - 2.5" Inlet/Outlet (Type 7)
Silicone 45: 1.5" Silicone 45° Elbow, Black
Stainless Steel Piping: Mandrel Bent Stainless Steel 45/180 Bend, 2.5"
Compressor Tbolt: T-Bolt Clamp for 1.75" Silicone Parts
Silicone Hose: 1.5" Silicone 2' Straight Hose, Black
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 4" Long
T4 Turbo Blanket: T4 Turbo Blanket
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.0" - Black
Silicone 45: 4.0" Silicone 45° Elbow, Blue
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.0"
Reinforced Silicone Heater Hose: 0.75" Reinforced Silicone Heater Hose, Black (per foot)
Silicone 60: 2.5" Silicone 60° Elbow, Black
Silicone Hose: 2.25" Silicone 2' Straight Hose, Black
Turbo Coupler: 3.5" Silicone Hump Hose, Black
Silicone 45: 3.0" Silicone 45° Elbow, Blue
Tube Reducer: Silicone Reducer, 2.25" to 2.0" - Black
Turbo Piping: Stainless Steel Joiner, 3.5"
Stainless Steel Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.75"
Turbo Piping: Stainless Steel Joiner, 4.0"
Mandrel SS Thick: 1' Extra Thick Stainless Steel 45° Bend, 2.5"
Silicone Couplers: 3.75" Silicone Straight Coupler, Black
Water to Air Intercoolers: Water to Air Intercooler - 11"x9.5"x3.5" - Thru I/O (Type 16)
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.25"
Pipe Reducer: Silicone Reducer, 4.5" to 3.5" - Black
T Bolt Hose Clamp: T-Bolt Clamp for 5.0" Silicone Parts
V Band Clamps: 3.5" V-Band Clamp
Water to Air Intercoolers: Water to Air Intercooler, 12.5"x12.25"x4.5", Thru I/O (Type 10)
Silicone 30: 2.25" Silicone 30° Elbow, Black
Silicone Hose: 1.0" Silicone 2' Straight Hose, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 90°Short
Titanium Turbo Blanket for T4: T4 Turbo Blanket - Titanium
Tube Reducer: Silicone Reducer, 3.5" to 2.25" - Black
Silicone 90: 1.625" Silicone 90° Elbow, Black
Silicone Tubing: 3.0" Silicone 2' Straight Hose, Blue
Silicone 60: 2.25" Silicone 60° Elbow, Black
Silicone 30: 1.5" Silicone 30° Elbow, Black
Mandrel SS: 1' Mandrel Bent Stainless Steel 45° Bend, 3.0"
Intercooler Pipe Fabrication: Stainless Steel Joiner, 2.0"
Pipe Reducer: Silicone Reducer, 2.0" to 1.75" - Black
HKS Style BOV Flange: Universal BOV with NEW HKS Style Flange - Silver (Type 15)
T-pipe: BOV T-Pipe with 2.0" V-Band Flange - 3.0"
T Band Clamp: T-Bolt Clamp for 3.75" Silicone Parts
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 2.0"
T6 Turbo Divided Flange: Stainless Steel Divided Flange, T6 Turbo
Titanium Exhaust Heat Wrap: 2" X 50' Titanium Exhaust/Header Wrap
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.25"
Worm Gear Clamps: Stainless Steel 2.25" Worm Gear Clamp (40-63mm)
Stainless Steel UJ Bend: Mandrel Bent Stainless Steel 45/180 Bend, 1.5"
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.75"
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 3' Long
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 4.0" - Black
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Black
Water to Air Intercoolers: Water to Air Intercooler, 17"x12.25"x9", O/S I/O (Type 21)
Silicone 60: 3.0" Silicone 60° Elbow, Blue
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 3.0"
T-pipe: BOV T-Pipe with HKS SSQV Style Flange - 2.5"
Silicone 90: 1.25" Silicone 90° Elbow, Black
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 3.0" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.0"
Silicone 135: 2.5" Silicone 135° Elbow, Black
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 3.0"
Aftermarket Boost Vacuum Hose: 6mm Red Silicone Boost/Vacuum Hose Per Ft.
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 3.0"
T-pipe: BOV T-Pipe with Greddy Type S Style Flange - 3.0"
Pipe Reducer: Silicone Reducer, 3.75" to 3.0" - Black
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.5"
SS Style BOV Flange: Universal BOV with 1" Inlet and Outlet - Silver (Type 10)
Pipe Reducer: Silicone Reducer, 1.5" to 1.375" - Black
Reducer Elbow: Silicone Reducer, 45° bend - 2.25" to 2.0" - Black
Silicone 30: 2.75" Silicone 30° Elbow, Black
Mandrel Thick SS: 2' Extra Thick Stainless Steel 90° Bend, 2.5"
Washable air filter media.: Air Filter with Splash Guard - Carbon Fiber, 3" inlet
Mandrel SS Thick: 2' Extra Thick Stainless Steel 45° Bend, 2.5"
Pipe Reducer: Silicone Reducer, 2.0" to 1.25" - Black
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 45° Bend, 2.25"
Air Filter Media: Foam Style Air Filter - red, 2.5" inlet
Pipe Reducer: Silicone Reducer, 1.625" to 1.375" - Black
Stainless Steel : 2' Mandrel Bent Stainless Steel 180° Bend, 2.25"
Mandrel Bent Stainless Steel Tubing: 2' Straight Stainless Steel Pipe, 2.75"
Silicone 180: 2.75" Silicone 180° Elbow, Black
Stainless Steel Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.75"
Pipe Reducer: Silicone Reducer, 1.75" to 1.5" - Black
Hose Coupler: 2.25" Silicone Hump Hose, Black
Silicone 30: 4.5" Silicone 30° Elbow, Black
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 3.5" - Black
Bending Reducer: Silicone Reducer, 45° bend - 3.5" to 2.5" - Black
Silicone Bend: 2.25" Silicone 45° Elbow, Black
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.0"
Silicone 90: 1.0" Silicone 90° Elbow, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 45°Long
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 45° Bend, 2.5"
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 1' Straight
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 2.5" V-Band Merge Collector
: Stainless Steel Line Straight Adaptor, -4 AN Black
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -12 AN Black, per ft.
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 90°Short
Turbo Coupler: 4.5" Silicone Hump Hose, Black
Silicone 90: 3.25" Silicone 90° Elbow, Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 90°Long
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 1' Straight
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.5" - Black
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Blue
Silicone Couplers: 4.5" Silicone Straight Coupler, Black
Mandrel SS Thick: 2' Straight Extra Thick Stainless Steel Pipe, 2.5"
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 90° Bend, 2.25"
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Silver
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 2.25" - Black
Tube Reducer: Silicone Reducer, 3.0" to 2.25" - Black
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 2.75"
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2.25"
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Blue
Silicone Boost/Vac Hose: 8mm Red Silicone Boost/Vacuum Hose Per Ft.
Stainless Steel UJ Bend: Mandrel Bent Aluminum 45/180 Bend, 1.5"
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.25"
Silicone Hose: 2.0" Silicone 2' Straight Hose, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T3, T3/T4 Merge Collector with Flange
Silicone 60: 1.5" Silicone 60° Elbow, Black
T4 Turbo Flange: Stainless Steel Flange, T4 Turbo
Tube Reducer: Silicone Reducer, 2.75" to 2.0" - Black
Silicone Tubing: 3.0" Silicone 1' Straight Hose, Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 1.5"
Titanium Turbo Blanket for T3: T3 Turbo Blanket - Titanium
Tube Reducer: Silicone Reducer, 2.75" to 2.25" - Black
02 Sensor Bung: Stainless Steel O2 Sensor Weld Bung, Lip Style, M18x1.5
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 3.5"
Pipe Reducer: Silicone Reducer, 1.875" to 1.625" - Black
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 90° Bend, 2.25"
Silicone Hose: 2.5" Silicone 1' Straight Hose, Blue
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.25" - Black
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 116)
Silicone 45: 1.75" Silicone 45° Elbow, Black
Silicone 60: 2.0" Silicone 60° Elbow, Black
Silicone 30: 2.0" Silicone 30° Elbow, Blue
Aluminum One-Way Check Valve 12mm Barbed : Aluminum One-Way Check Valve, 12mm Barbed Silver
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 180° Bend, 2.25"
Aluminum One-Way Check Valve -6AN: Aluminum One-Way Check Valve, -6AN Silver
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 90° Bend, 2.0"
Pipe Reducer: Silicone Reducer, 2.0" to 1.75" - Blue
Stainless Steel Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.75"
T3 T3/T4 Turbo Flange: Stainless Steel Flange, T3 T3/T4 Turbo
: Compact Oil Drain Flange(Mitsubishi Style), -10AN
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 180° Bend, 1.5"
Silicone 135: 2.25" Silicone 135° Elbow, Black
Silicone 45: 3.0" Silicone 45° Elbow, Red
Mandrel Bent Thick Stainless Steel Tubing: 1' Straight Extra Thick Stainless Steel Pipe, 2.25"
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Blue (Type 5)
Reinforced Silicone Heater Hose: 0.875" Reinforced Silicone Heater Hose, Black (per foot)
Pipe Reducer: Silicone Reducer, 2.5" to 2.0" - Blue
Pipe Reducer: Silicone Reducer, 2.5" to 2.25" - Blue
Pipe Reducer: Silicone Reducer, 3.0" to 2.0" - Blue
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.0"
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 90°Long
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 4.0"
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.5" - Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.625" - Black
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.0" - Blue
Blue hump hose: 2.75" Silicone Hump Hose, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, Tee
HKS Style BOV Flange: Universal BOV with HKS Style Flange - Silver (Type 3)
Silicone 30: 2.75" Silicone 30° Elbow, Blue
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 3.0"
Silicone 45: 3.25" Silicone 45° Elbow, Black
Pipe Reducer: Silicone Reducer, 1.125" to 1.0" - Black
Bending Reducer: Silicone Reducer, 45° bend - 3.25" to 2.5" - Black
TurboXS Style BOV Flange: Universal Classic Style BOV - Silver (Type 11)
Pipe Reducer: Silicone Reducer, 2.0" to 1.875" - Black
Pipe Reducer: Silicone Reducer, 3.5" to 2.5" - Blue
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 90°Short
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 45° Bend, 2.0"
Silicone 60: 1.75" Silicone 60° Elbow, Black
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.75"
Stainless Steel Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.75"
Pipe Reducer: Silicone Reducer, 4.0" to 2.5" - Blue
Silicone Hose: 3.0" Silicone 2' Straight Hose, Red
Pipe Reducer: Silicone Reducer, 3.25" to 2.5" - Black
Silicone 135: 2.0" Silicone 135° Elbow, Black
Silicone 135: 2.5" Silicone 135° Elbow, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS T25/T28 Merge Collector
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.5"
Silicone 60: 4.5" Silicone 60° Elbow, Black
Bending Reducer: Silicone Reducer, 90° bend - 3.25" to 2.5" - Black
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 90° Bend, 2.0"
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 3.5"
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Blue
Silicone 30: 1.25" Silicone 30° Elbow, Black
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.625"
Reinforced Silicone Heater Hose: 0.75" Reinforced Silicone Heater Hose, Blue (per foot)
Intercooler Piping: 2.25" Silicone 2' Straight Hose, Blue
Blitz Style BOV Flange: Universal BOV with Blitz Style Flange - Silver (Type 8)
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 3.5"
Silicone BOV T: Silicone T Pipe with 1" BOV Port - 2.5" Inlet/Outlet, black
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 3.5"
Worm Gear Clamps: Stainless Steel 3.75" Worm Gear Clamp (78-101mm)
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.0"
Pipe Reducer: Silicone Reducer, 2.75" to 1.75" - Black
Silicone 90: 3.5" Silicone 90° Elbow, Red
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 135° Bend, 2.5"
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Silver (Type 6)
Pipe Reducer: Silicone Reducer, 2.75" to 2.5" - Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 45°Long
Silicone Hose: 4.5" Silicone 2' Straight Hose, Blue
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 111)
Silicone 45: 4.5" Silicone 45° Elbow, Blue
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.75"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T4 Merge Collector with Flange
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 112)
Hump Hose Coupler: 2.25" Silicone Hump Hose, Blue
Pipe Reducer: Silicone Reducer, 2.0" to 1.5" - Blue
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.5"
Silicone 135: 2.75" Silicone 135° Elbow, Black
Red Elbow: 2.0" Silicone 45° Elbow, Red
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 180°Long
Pipe Reducer: Silicone Reducer, 3.5" to 2.25" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 3.5"
Pipe Reducer: Silicone Reducer, 1.25" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 1.75" to 1.0" - Black
Turbo Coupler: 1.5" Silicone Hump Hose, Black
Turbo Piping: Stainless Steel Joiner, 3.25"
Mandrel Bent Thick Stainless Steel Tubing: 2' Straight Extra Thick Stainless Steel Pipe, 2.25"
Stainless Steel 45/180 bend: Mandrel Bent Stainless Steel 45/180 Bend, 1.625"
Mandrel Bent SS: 1' Straight Stainless Steel Pipe, 2.5"
Silicone Hose: 2.0" Silicone 2' Straight Hose, Red
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.25" - Blue
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 180° Bend, 2.5"
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 4.0" - Blue
Heat Exchanger for Oil: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 110)
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 4.0" - Blue
Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 108)
Mandrel Bent Stainless Steel Tubing: 1' Straight Stainless Steel Pipe, 2.75"
Pipe Reducer: Silicone Reducer, 1.5" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 1.75" to 1.5" - Blue
Water to Air Coolers: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 104)
Reinforced Silicone Heater Hose: 0.875" Reinforced Silicone Heater Hose, Blue (per foot)
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.75"
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.75"
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Gold/Blue
Pipe Reducer: Silicone Reducer, 4.5" to 3.5" - Blue
Worm Gear Clamps: Stainless Steel 0.375" Worm Gear Clamp (6-13mm)
Heat Exchanger for Oil: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 105)
T28 T28 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T25/T28 Turbo
Red Hump Hose: 2.0" Silicone Hump Hose, Red
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 45° Bend, 2.0"
Silicone 180: 2.5" Silicone 180° Elbow, Blue
Silicone 135: 2.5" Silicone 135° Elbow, Red
Pipe Reducer: Silicone Reducer, 3.5" to 3.25" - Blue
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.75"
Pipe Reducer: Silicone Reducer, 1.875" to 1.75" - Black
Pipe Reducer: Silicone Reducer, 2.25" to 2.0" - Blue
Pipe Reducer: Silicone Reducer, 2.75" to 2.0" - Blue
Silicone 30: 4.5" Silicone 30° Elbow, Blue
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Red
Silicnoe 60: 1.0" Silicone 60° Elbow, Blue
Stainless Steel 45/180 bend: Mandrel Bent Aluminum 45/180 Bend, 1.625"
Silicone 60: 1.5" Silicone 60° Elbow, Blue
Silicone 30: 1.75" Silicone 30° Elbow, Blue
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 45° Bend, 2.75"
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 45° Bend, 2.25"
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 1.75" - Red
Silicone BOV T: Silicone T Pipe with 1.25" BOV Port - 2.5" Inlet/Outlet, black
Silicone 60: 1.25" Silicone 60° Elbow, Blue
Bending Reducer: Silicone Reducer, 90° bend - 3.5" to 2.5" - Blue
Silicone 90: 1.25" Silicone 90° Elbow, Blue
: AN Nut, -4 AN Blue
Silicone 60: 1.75" Silicone 60° Elbow, Blue
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.0" - Blue
Silicone 60: 2.0" Silicone 60° Elbow, Blue
Water to air fittings: Brass 1/8" NPT Male to 4mm Barbed Straight
Silicone 60: 2.25" Silicone 60° Elbow, Blue
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 45° Bend, 2.0"
Mandrel SS Thick: 2' Extra Thick Stainless Steel 135° Bend, 2.5"
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.625"
Silicone 45: 3.5" Silicone 45° Elbow, Red
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.625"
Bending Reducer: Silicone Reducer, 45° bend - 3.25" to 2.5" - Blue
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 2.5" - Blue
Hump Hose Coupler: 3.5" Silicone Hump Hose, Blue
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 180° Bend, 2.0"
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 180° Bend, 1.5"
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Black
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Blue
Turbo Coupler: 1.0" Silicone Hump Hose, Blue
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 45°Long
Downpipe Gasket 3.0" GT series/T3 Turbo: Stainless Steel Gasket GT series/T3 Turbo Discharge, 3.0"
Pipe Reducer: Silicone Reducer, 3.25" to 2.25" - Blue
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 1.5"
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.0"
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 135° Bend, 2.25"
Pipe Reducer: Silicone Reducer, 2.75" to 2.25" - Blue
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 135° Bend, 2.0"
Mandrel Bent SS: 2' Mandrel Bent Stainless Steel 180° Bend, 2.5"
Pipe Reducer: Silicone Reducer, 1.25" to 1.125" - Black
Aluminum One-Way Check Valve -4AN: Aluminum One-Way Check Valve, -4AN Silver
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 45° Bend, 2.0"
Mandrel Bent Thick Stainless Steel Tubing: 1' Extra Thick Stainless Steel 180° Bend, 2.25"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 180°Long
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS to 1" NPS Reducer
Silicone Turbo Hoses: 2.25" Silicone Straight Coupler, Red
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 90°Long
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 90°Short
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Silver
Aftermarket Brake Lines: AN Plug, -6 AN Blue
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Silver
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 4.0"
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Silver
Methanol Fuel Line: AN Female to Female Union, -10 AN Blue
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Silver
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 4.5"
: AN Straight Union, -12 AN Silver
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 5.0"
Water to air fittings: Brass 1/2" NPT Male to 1" Barbed 90 Elbow
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Blue
AN -8 Stainless Steel Hoses: PTFE Braided Stainless Steel Lines, -8 AN Black, per ft.
4' Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 4' Long
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Black
V Band Clamp: 2.25" V-Band Clamp
: AN to Barbed Fitting Adaptor, -12 AN to 1" Black
V Band Clamps: 2.25" Mild Steel V-Band Clamp Rings (Set of 2)
: AN to NPT Adaptor, -12 AN to 3/8" NPT Black
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Black
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Silver
5.0" Turbo Intake Aluminum Velocity Stack : 5.0" Aluminum Velocity Stack, Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.0" - Black
: AN to Barbed Fitting Adaptor, -6 AN to 6mm Black
Prosport Water Temperature Digital Gauge: Prosport Water Temperature Gauge Digital Display-52mm
Carbon Fiber Hose: 3.5" Carbon Fiber 2' Straight Hose
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Black
Water to Air Pump 0392022002: Cobra 0392022002 Intercooler Pump and Harness (House Brand/Aftermarket)
Silicone Y Pipe Reducer: Silicone Y Reducer - 2.5" to 2x 2.0" - Black
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Silver
Carbon Fiber 90: 2.5" Carbon Fiber 90° Elbow
Prosport Exhaust Gas Temperature Digital Gauge: Prosport Exhaust Gas Temperature Gauge Digital display-52mm
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Black
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Black
: AN to NPT Adaptor, -10 AN to 3/8" NPT Black
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Black
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.5" to 2x 2.5" - Black
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.5" to 2x 2.5" - Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.5" - Blue
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.5" - Black
: AN to Barbed Fitting Adaptor, -6 AN to 10mm Blue
Prosport Air Fuel Ratio Digital Gauge: Prosport Air/Fuel Ratio & Voltage Gauge Digital Display-52mm
Prosport Digital Clock : Prosport Performance Series Digital Clock-52mm
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Black
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Black
Silicone Y Pipe Reducer: Silicone Y Reducer - 2.5" to 2x 2.0" - Blue
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Black
Prosport Oil Temperature Digital Gauge: Prosport Oil Temperature Gauge Digital Display-52mm
Silicone Y Pipe Reducer: Silicone Y Reducer - 3.0" to 2x 2.0" - Blue
: NPT to NPT Adapter, 1/2" NPT to 3/8" NPT Blue
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -4AN
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Black
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -6AN
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Blue
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -8AN
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -10AN
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Black
AN Lines Pressure Tester: AN Lines and Fittings Pressure Test Kit: -12AN
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Black
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Black
: EV1 Fuel Injector Connector Pigtail Harness
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Black
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Blue
Water to air fittings: Aluminum Mini Silicone Port System - 4mm
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Black
Water to air fittings: Aluminum Mini Silicone Port System - 6mm
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Blue
Water to air fittings: Aluminum Mini Silicone Port System - 8mm
: AN to NPT Adaptor, -12 AN to 3/8" NPT Blue
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Black
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Black
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -10 AN to 8mm Black
: AN to Barbed Fitting Adaptor, -10 AN to 10mm Blue
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Blue
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -12 AN to 10mm Silver
: AN to Barbed Fitting Adaptor, -12 AN to 3/4" Blue
Water to air fittings: Aluminum Mini Silicone Port System - 10mm
: NPT to NPT Adapter, 1/2" NPT to 3/8" NPT Black
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Blue
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Blue
Water to air fittings: Brass 1/2" NPT Male to 4mm Barbed Straight
Water to air fittings: Brass 1/2" NPT Male to 6mm Barbed Straight
Water to air fittings: Brass 1/2" NPT Male to 8mm Barbed Straight
Water to air fittings: Brass 1/2" NPT Male to 10mm Barbed Straight
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Blue
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Blue
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Blue
: AN to Barbed Fitting Adaptor, -12 AN to 1" Blue
: AN to Barbed Fitting Adaptor, -12 AN to 1" Silver
: AN to NPT Adaptor, -10 AN to 3/8" NPT Blue
Silicone 30: 4.0" Silicone 30° Elbow, Black
How to prevent header rust: 6" X 50' Fiberglass Exhaust/Header Wrap, Blue
Turbo Piping: Stainless Steel Joiner, 3.0"
Silicone 90: 1.75" Silicone 90° Elbow, Black
Silicone Turbo Hoses: 2.25" Silicone Straight Coupler, Black
Turbo Coupler: 4.0" Silicone Hump Hose, Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.0"
Silicone 45: 1.25" Silicone 45° Elbow, Blue
Black Hump Hose: 2.0" Silicone Hump Hose, Black
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 4" Long
Remote Radiator Filler Cap: Remote Radiator Inline Filler Cap - 1.5"
Silicone Hose: 2.5" Silicone 1' Straight Hose, Black
Silicone Boost Vacuum Hose: 4mm Blue Silicone Boost/Vacuum Hose Per Ft.
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.0"
Silicone 30: 3.0" Silicone 30° Elbow, Black
Aluminum Pipe: 2' Straight Aluminum Pipe, 1.5"
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 4.0"
Stainless Steel Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.75"
Silicone 60: 3.0" Silicone 60° Elbow, Black
Liquid to air fittings: Brass 1/2" NPT Male to 3/4" Barbed 90 Elbow
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.0" - Black
Aluminum Pipe: 1' Straight Aluminum Pipe, 4.0"
Reinforced Silicone Heater Hose: 1.0" Reinforced Silicone Heater Hose, Black (per foot)
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 4.0"
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Black
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Black
Pipe Reducer: Silicone Reducer, 3.25" to 3.0" - Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 1.5"
Intercooler Pump: Water to Air Intercooler Radiator Pump, Rule 401FC
Reducer Elbow: Silicone Reducer, 45° bend - 4.0" to 3.5" - Black
Silicone Couplers: 5.0" Silicone Straight Coupler, Black
Custom Aluminum V-Band Intake Flange: 4.0" Aluminum V-Band Clamp Rings (Set of 2)
AN -8 Stainless Steel Hoses: PTFE Braided Stainless Steel Lines, -8 AN, per ft.
Aftermarket Boost Vacuum Hose: 6mm Blue Silicone Boost/Vacuum Hose Per Ft.
Silicone 30: 1.75" Silicone 30° Elbow, Black
Silicone Hose: 4.0" Silicone 2' Straight Hose, Blue
Silicone 30: 3.5" Silicone 30° Elbow, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 180° Bend, 1.5"
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Black
Silicone Hose: 3.5" Silicone 2' Straight Hose, Black
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 45°Long
Stainless Steel Brake Lines: PTFE Braided Stainless Steel Lines, -6 AN Black, per ft.
Aluminum Pipe: 2' Straight Aluminum Pipe, 2.75"
Stainless Steel Pipe: 2' Straight Stainless Steel Pipe, 1.5"
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Black
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.0"
Silicone 90: 3.0" Silicone 90° Elbow, Red
Custom Aluminum V-Band Intake Flange: 3.0" Aluminum V-Band Clamp Rings (Set of 2)
Smooth bore PTFE hose: PTFE Braided Stainless Steel Lines, -4 AN, per ft.
Aluminum Pipe: 2' Mandrel Bent Aluminum 45° Bend, 2.0"
Silicone Hose: 4.5" Silicone 2' Straight Hose, Black
Turbo Piping: Stainless Steel Joiner, 2.75"
Pipe Reducer: Silicone Reducer, 2.25" to 1.75" - Black
Pipe Reducer: Silicone Reducer, 1.625" to 1.5" - Black
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.25"
Pipe Reducer: Silicone Reducer, 5.0" to 4.5" - Black
Black Silicone Hose: 2.75" Silicone 2' Straight Hose, Black
Tube Reducer: Silicone Reducer, 2.5" to 2.25" - Black
Custom Intercooler Piping: Stainless Steel Joiner, 2.25"
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Black
Pipe Reducer: Silicone Reducer, 3.75" to 3.5" - Black
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -10 AN, per ft.
Silicone Boost Vacuum Hose: 4mm Red Silicone Boost/Vacuum Hose Per Ft.
V Band Clamps: 4.0" Mild Steel V-Band Clamp Rings (Set of 2)
Silicone 30: 3.0" Silicone 30° Elbow, Blue
Reinforced Silicone Heater Hose: 0.625" Reinforced Silicone Heater Hose, Black (per foot)
V Band Clamps: 4.0" V-Band Clamp
Worm Gear Clamps: Stainless Steel 1.25" Worm Gear Clamp (18-32mm)
Pipe Reducer: Silicone Reducer, 3.5" to 3.25" - Black
Pipe Reducer: Silicone Reducer, 4.0" to 3.25" - Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 1.5"
Silicone 45: 1.25" Silicone 45° Elbow, Black
Silicone Coupler: 2.5" Silicone Straight Coupler, Blue
V Band Clamps: 2.5" Mild Steel V-Band Clamp Rings (Set of 2)
T-pipe: BOV T-Pipe with Greddy Type S Style Flange - 2.5"
Pipe Reducer: Silicone Reducer, 1.75" to 1.625" - Black
Reducer Elbow: Silicone Reducer, 90° bend - 2.25" to 2.0" - Blue
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -10 AN Black, per ft.
Silicone 30: 2.5" Silicone 30° Elbow, Blue
Pipe Reducer: Silicone Reducer, 3.0" to 2.75" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 1.5"
Silicone 180: 3.0" Silicone 180° Elbow, Black
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 109)
Silicone Boost Vacuum Hose: 10mm Blue Silicone Boost/Vacuum Hose Per Ft.
2.5" air filter: Dual-Cone Air Filter - black, 2.5" inlet
Pipe Reducer: Silicone Reducer, 3.5" to 3.0" - Blue
Pipe Reducer: Silicone Reducer, 3.0" to 2.5" - Blue
Bending Reducer: Silicone Reducer, 90° bend - 3.5" to 2.5" - Black
90 degree blue hoses: 3.5" Silicone 90° Elbow, Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.0"
Silicone 90: 2.0" Silicone 90° Elbow, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, 1' Straight
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Black
Silicone 60: 3.5" Silicone 60° Elbow, Black
Silicone Hose: 2.5" Silicone 2' Straight Hose, Red
Pipe Reducer: Silicone Reducer, 2.25" to 1.75" - Blue
Silicone Boost/Vac Hose: 8mm Blue Silicone Boost/Vacuum Hose Per Ft.
Aluminum Pipe: 1' Straight Aluminum Pipe, 1.5"
Pipe Reducer: Silicone Reducer, 1.5" to 1.25" - Black
Silicone Tubing: 3.25" Silicone 2' Straight Hose, Blue
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Slim Electric Fan: 14" Radiator Fan with Mounting Kit
Pipe Reducer: Silicone Reducer, 1.5" to 1.0" - Black
Pre-Intercooler Cooling Pipe: Pre-Intercooler Cooling Pipe - 2.5"
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Blue
Silicone 90: 2.5" Silicone 90° Elbow, Red
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Black
Valve Stem: Tire Valve Stem - Clamp Down Type
: T3/T4 Turbo Oil Drain Flange, -10AN
Silicone Coupler: 3.0" Silicone Straight Coupler, Blue
Mandrel bend: Mandrel Bent Aluminum 45/180 Bend, 2.25"
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Silver
Aluminum Pipe: 1' Straight Aluminum Pipe, 2.75"
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 90° Bend, 2.0"
4.0" Black Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Black
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.5"
Silicone Turbo Hoses: 1.25" Silicone Straight Coupler, Black
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Black
Silicone Couplers: 4.0" Silicone Straight Coupler, Blue
Silicone Tubing: 3.5" Silicone 2' Straight Hose, Blue
Aluminized Thermal Wrap: 2" X 33' Aluminized Thermal Wrap for Intake Pipes
Silicone Hose: 1.625" Silicone 2' Straight Hose, Black
Mandrel SS Thick: 1' Extra Thick Stainless Steel 90° Bend, 2.5"
Reinforced Silicone Heater Hose: 0.625" Reinforced Silicone Heater Hose, Blue (per foot)
Exhaust wrap to minimize fatigue: 2" X 50' Fiberglass Exhaust/Header Wrap, Black
Silicone 60: 2.75" Silicone 60° Elbow, Black
Stainless Steel : 2' Straight Stainless Steel Pipe, 2.25"
T4 Turbo Divided Flange: Stainless Steel Divided Flange, T4 Turbo
Silicone Turbo Hoses: 3.25" Silicone Straight Coupler, Black
Silicone Bend: 2.5" Silicone 45° Elbow, Blue
Reducer Elbow: Silicone Reducer, 90° bend - 4.5" to 3.5" - Blue
Silicone 90: 1.5" Silicone 90° Elbow, Blue
Silicone 180: 2.5" Silicone 180° Elbow, Black
Mandrel SS Thick: 1' Extra Thick Stainless Steel 180° Bend, 2.5"
Mandrel Bent SS: 2' Straight Stainless Steel Pipe, 2.5"
Silicone 30: 4.0" Silicone 30° Elbow, Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 45° Bend, 2.75"
T-pipe: BOV HKS SSQV Style Flange with 1.25" Outlet
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 90°Short
V Band Clamps: 2.0" Stainless Steel V-Band Clamp Rings (Set of 2)
High Flow Cat: AllFlow Test Pipe, Mild Steel - 2"
Water to Air Intercooler: Water to Air Intercooler DIY Kit 1200 HP
Silicone 90: 4.5" Silicone 90° Elbow, Black
Air Filter Media: Foam Style Air Filter - red, 3" inlet
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 90° Bend, 2.25"
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Black
Pipe Reducer: Silicone Reducer, 4.5" to 4.0" - Blue
Ultimate Drag Racing Water to Air Intercooler: Water to Air Ultimate Drag Kit
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Blue
Reinforced Silicone Heater Hose: 0.5" Reinforced Silicone Heater Hose, Black (per foot)
Reinforced Silicone Heater Hose: 0.5" Reinforced Silicone Heater Hose, Blue (per foot)
Silicone 45: 1.5" Silicone 45° Elbow, Blue
Silicone Turbo Hoses: 1.0" Silicone Straight Coupler, Black
Worm Gear Clamps: Stainless Steel 3.25" Worm Gear Clamp (65-89mm)
Water to air adapters: Brass 3/4" NPT Male to 3/4" Barbed Straight
Silicone Hose: 2.0" Silicone 1' Straight Hose, Black
High Temperature Water Hose: 1"(25mm) ID water hose, black (per foot)
Air Filter Material: Dual-Cone Air Filter - black, 3.5" inlet
Hump Hose Coupler: 3.0" Silicone Hump Hose, Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.25"
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 135° Bend, 2.0"
Silicone Turbo Hoses: 3.0" Silicone Straight Coupler, Red
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.25"
Turbo Coupler: 4.0" Silicone Hump Hose, Blue
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.5"
Mandrel SS Thick: 1' Straight Extra Thick Stainless Steel Pipe, 2.5"
Pipe Reducer: Silicone Reducer, 1.625" to 1.25" - Black
Custom Aluminum V-Band Intake Flange: 3.5" Aluminum V-Band Clamp Rings (Set of 2)
: T3/T4 Turbo Oil Feed Flange, -4AN
Turbo Coupler: 3.25" Silicone Hump Hose, Black
2-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 2-Bolt, 2.25"
T-pipe: BOV T-Pipe with 1" BOV T - 2.5"
V Band Clamps: 3.5" Mild Steel V-Band Clamp Rings (Set of 2)
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 1' Straight
02 Sensor Bung 45 Degree Cut Angled: Stainless Steel O2 Sensor Weld Bung, 45° cut, M18x1.5
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.5"
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Black
Silicone Boost Vacuum Hose: 10mm Red Silicone Boost/Vacuum Hose Per Ft.
Stainless Steel Locking Ties: Stainless Steel Zip Tie/Cable Tie, 12"
T-pipe: BOV T-Pipe with 2.0" V-Band Flange - 2.5"
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 45°Long
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 106)
Silicone Coupler: 2.0" Silicone Straight Coupler, Blue
Silicone Turbo Hoses: 1.75" Silicone Straight Coupler, Black
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 90° Bend, 1.5"
Pipe Reducer: Silicone Reducer, 3.25" to 3.0" - Blue
90 degree blue hoses: 2.75" Silicone 90° Elbow, Blue
Hose Coupler: 2.5" Silicone Hump Hose, Blue
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 2.5" - Black
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 180° Bend, 2.0"
: Stainless Steel Line 45° Adaptor, -4 AN Black
Universal Air Filter: Dual-Cone Air Filter - black, 3" inlet
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Black
Silicone Elbow: 2.25" Silicone 90° Elbow, Blue
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Silver
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2.0" NPS, 45°Long
Pipe Reducer: Silicone Reducer, 2.5" to 1.5" - Black
Worm Gear Clamps: Stainless Steel 3" Worm Gear Clamp (54-82mm)
Silicone 60: 4.0" Silicone 60° Elbow, Blue
3.0" GT series/T3 Turbo Flange: Stainless Steel Flange, 3.0" GT series/T3 Turbo Discharge
Silicone 45: 2.5" Silicone 45° Elbow, Red
Silicone Hose: 3.25" Silicone 2' Straight Hose, Black
Pipe Reducer: Silicone Reducer, 1.75" to 1.25" - Black
Pipe Reducer: Silicone Reducer, 4.0" to 3.25" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 3.0"
Water to air fittings: Brass 1/8" NPT Male to 6mm Barbed Straight
Water to air fittings: 6AN brass ring
Custom Aluminum V-Band Intake Flange: 2.5" Aluminum V-Band Clamp Rings (Set of 2)
Water to air fittings: Brass 1/2" NPT Male to 1/2" Barbed Straight
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Black
3.0" Turbo Intake Aluminum Velocity Stack : 3.0" Aluminum Velocity Stack, Black
Exhaust Manifold Heat Wrap: 6" X 50' Fiberglass Exhaust/Header Wrap, Black
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 8" Long
Air Filter Media: Foam Style Air Filter - green, 2.5" inlet
Silicone Hose: 2.5" Silicone 2' Straight Hose, Blue
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.5"
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Black
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Black
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe, 3.0"
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Red
Pipe Reducer: Silicone Reducer, 2.0" to 1.0" - Black
Silicone Hose: 1.25" Silicone 2' Straight Hose, Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.5"
Pipe Reducer: Silicone Reducer, 4.0" to 3.0" - Blue
Silicone 60: 2.5" Silicone 60° Elbow, Blue
Mandrel SS: 1' Mandrel Bent Stainless Steel 180° Bend, 3.0"
Silicone Hose: 1.5" Silicone 2' Straight Hose, Blue
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2.5" NPS to 1.5" NPS Reducer
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 2.5" - Black
Reducer Elbow: Silicone Reducer, 45° bend - 3.5" to 3.0" - Blue
Header Wrap: 2" X 100' Fiberglass Exhaust/Header Wrap, Tan
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Black
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.5"
Silicone 30: 1.0" Silicone 30° Elbow, Black
Blue Couplers: 2.75" Silicone 2' Straight Hose, Blue
Water to Air Intercooler: Water to Air Intercooler DIY Kit 600 HP
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, Tee
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Black
Mandrel Bent Thick SS: 2' Straight Extra Thick Stainless Steel Pipe, 2.0"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS to 1.5" NPS Reducer
Aluminum Pipe: 1' Mandrel Bent Aluminum 90° Bend, 2.25"
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Black
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2.25"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T3, T3/T4 Merge Collector
Water to Air Intercooler: Water to Air Intercooler DIY Kit 350 HP
Worm Gear Clamps: Stainless Steel 3.5" Worm Gear Clamp (72-95mm)
V Band Clamps: 3.5" Stainless Steel V-Band Clamp Rings (Set of 2)
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Red/Blue
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.25" - Black
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Silver
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 4" Long
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Silver
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Blue
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Silver
Turbo Coupler: 2.5" Silicone Hump Hose, Red
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 6" Long
Reinforced Silicone Heater Hose: 1.0" Reinforced Silicone Heater Hose, Blue (per foot)
AN Braided Stainless Steel Lines: PTFE Braided Stainless Steel Lines, -12 AN, per ft.
Silicone 180: 3.0" Silicone 180° Elbow, Blue
Exhaust Flex Section: 3.0" Stainless Steel Exhaust/Intake Flex Section - 10" Long
Water to air fittings: 8AN brass ring
Fuel Pump Mounting Bracket: 2.5" Aluminum Water/Fuel Pump Mounting Bracket, Black
Pipe Reducer: Silicone Reducer, 2.5" to 1.5" - Blue
Silicone Hose: 1.75" Silicone 2' Straight Hose, Blue
Silicone Hose: 2.0" Silicone 1' Straight Hose, Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Black
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Red/Blue
Pipe Reducer: Silicone Reducer, 4.0" to 3.75" - Blue
Coolant System and Head Gasket Pressure Test Valve: Coolant System and Head Gasket Pressure Test Valve
Silicone Hose: 2.25" Silicone 2' Straight Hose, Red
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Black
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Silver
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Black
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Red/Blue
Silicone Turbo Hoses: 2.5" Silicone Straight Coupler, Red
Mandrel SS: 2' Mandrel Bent Stainless Steel 135° Bend, 3.0"
Pipe Reducer: Silicone Reducer, 2.25" to 1.5" - Black
Smooth bore PTFE hose: PTFE Braided Stainless Steel Lines, -4 AN Black, per ft.
Custom Aluminum V-Band Intake Flange: 2.25" Aluminum V-Band Clamp Rings (Set of 2)
Stainless Steel Pipe: 1' Straight Stainless Steel Pipe, 1.5"
Car Air Filter: Dual-Cone Air Filter - blue, 3" inlet
Silicone Coupler: 2.25" Silicone Straight Coupler, Blue
Red Bend: 2.0" Silicone 90° Elbow, Red
Silicone 45: 2.0" Silicone 45° Elbow, Blue
X Crossover Exhaust Pipe: Stainless Steel Exhaust X Pipe, 3.0"
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Black
Methanol Fuel Line: AN Female to Female Union, -6 AN Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 4.0"
3.0" Turbo Intake Aluminum Velocity Stack : 3.0" Aluminum Velocity Stack, Silver
4.0" Silver Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Silver
IAT Installation: Stainless Steel Joiner with Water Injection/Probe Taps, 2.5"
V Band Clamps: 4.0" Stainless Steel V-Band Clamp Rings (Set of 2)
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.0"
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.0"
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS, Tee
Stainless Steel Tube Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.625"
Stainless Steel Tube: 2' Straight Stainless Steel Pipe, 2.0"
: Stainless Steel Line Straight Adaptor, -4 AN Silver
Pipe Reducer: Silicone Reducer, 3.25" to 2.75" - Black
: Stainless Steel Line 90° Adaptor, -4 AN Silver
Turbo Coupler: 3.0" Silicone Hump Hose, Red
Reducer Elbow: Silicone Reducer, 90° bend - 2.5" to 2.0" - Red
Pipe Reducer: Silicone Reducer, 2.5" to 2.25" - Red
Silicone Turbo Hoses: 1.625" Silicone Straight Coupler, Black
V Band Clamps: 2.0" Mild Steel V-Band Clamp Rings (Set of 2)
Worm Gear Clamps: Stainless Steel 2.5" Worm Gear Clamp (46-70mm)
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 90° Bend, 1.5"
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Black
Stainless Steel : 2' Mandrel Bent Stainless Steel 45° Bend, 2.25"
Aluminum -10 AN Fittings: Stainless Steel Line 90° Adaptor, -10 AN Red/Blue
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 4.0"
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Black
Red Silicone Hose: 2.75" Silicone 2' Straight Hose, Red
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 3.5"
Pipe Reducer: Silicone Reducer, 1.625" to 1.0" - Black
Water to air fittings: 4AN brass ring
Methanol Fuel Line: AN Straight Union, -6 AN Black
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Silver
Custom Aluminum V-Band Intake Flange: 2.0" Aluminum V-Band Clamp Rings (Set of 2)
Mandrel Bent Thick SS: 2' Extra Thick Stainless Steel 135° Bend, 2.0"
Worm Gear Clamps: Stainless Steel 2.75" Worm Gear Clamp (50-76mm)
Silicone 30: 3.25" Silicone 30° Elbow, Black
Methanol Fuel Line: AN Straight Union, -8 AN Black
Stainless Steel Pipe Thick: 2' Straight Extra Thick Stainless Steel Pipe, 1.5"
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Blue
Greddy Type RS Style BOV Flange: Universal BOV with Greddy Type RS Style Flange - Silver (Type 7)
Worm Gear Clamps: Stainless Steel 5.5" Worm Gear Clamp (130-152mm)
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 4.0"
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Black
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 90° Bend, 1.5"
Silicone 180: 2.0" Silicone 180° Elbow, Black
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Black
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Blue
Bending Reducer: Silicone Reducer, 45° bend - 3.5" to 2.5" - Blue
V Band Clamps: 4.5" V-Band Clamp
Worm Gear Clamps: Stainless Steel 4" Worm Gear Clamp (84-108mm)
2.5" GT series/T3 Turbo Flange: Stainless Steel Flange, 2.5" GT series/T3 Turbo Discharge
Silicone 135: 2.25" Silicone 135° Elbow, Blue
Water to air fittings: 10AN brass ring
Aluminum One-Way Check Valve 10mm Barbed : Aluminum One-Way Check Valve, 10mm Barbed Silver
Reducer Elbow: Silicone Reducer, 45° bend - 2.5" to 2.0" - Blue
Auto Air Filter: Dual-Cone Air Filter - chrome, 3" inlet
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 3.0"
Stainless Steel Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.75"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 3.0" V-Band Merge Collector
Mandrel SS: 1' Straight Stainless Steel Pipe, 3.0"
3.5" air filter: Air Filter with Splash Guard - Carbon Fiber, 3.5" inlet
Silicone 45: 3.5" Silicone 45° Elbow, Blue
Worm Gear Clamps: Stainless Steel 0.75" Worm Gear Clamp (13-23mm)
Air Filter Media: Foam Style Air Filter - blue, 3" inlet
Methanol Fuel Line: AN Straight Union, -10 AN Black
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 2.25"
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Blue
Silicone 90: 1.75" Silicone 90° Elbow, Blue
Air Filter Media: Foam Style Air Filter - green, 3" inlet
Pipe Reducer: Silicone Reducer, 3.5" to 3.0" - Red
X Crossover Exhaust Pipe: Stainless Steel Exhaust X Pipe, 2.5"
Pipe Reducer: Silicone Reducer, 3.75" to 3.25" - Black
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 3.5"
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Silver
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 45° Bend, 1.5"
K N Air Filter Alternative: Dual-Cone Air Filter - chrome, 3.5" inlet
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, 180°Long
Worm Gear Clamps: Stainless Steel 4.25" Worm Gear Clamp (91-114mm)
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Silver
Silicone Sleeve: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Red
Silicone Couplet: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Black
Silicone Connector: Reinforced Silicone Coupler and Clamp Kit, 3.0" - Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 4.0"
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Red/Blue
Aftermarket Brake Lines: AN Plug, -6 AN Black
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -10 AN Lines (5 Pack)
Tube Reducer: Silicone Reducer, 2.25" to 2.0" - Red
Mandrel bend: Mandrel Bent Stainless Steel 45/180 Bend, 2.25"
Bending Reducer: Silicone Reducer, 90° bend - 4.0" to 3.0" - Red
Tube Reducer: Silicone Reducer, 2.5" to 2.0" - Red
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Blue
Silicone Couplet: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 90°Short
Silicone Sleeve: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Black
Silicone Boot: Reinforced Silicone Coupler and Clamp Kit, 2.0" - Red
Stainless Steel Zip Ties: Stainless Steel Zip Tie/Cable Tie, 8"
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Red/Blue
T4 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T4 Turbo
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Black
Worm Gear Clamps: Stainless Steel 1.5" Worm Gear Clamp (21-44mm)
Gasket for V-Band Assembly: Gasket for 3.0" Aluminum V-Band Assembly
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Silver
Greddy Type S Style BOV Flange: Universal BOV with Greddy Type S Style Flange - Red (Type 4)
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Silver
Upgraded Brake Fluid Line: AN Tee, -10 AN Black
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.5"
Silicone Boots: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Blue
Stainless Steel Tube: 1' Straight Stainless Steel Pipe, 2.0"
AN Lines Pressure Tester: AN to NPT Female Adaptor, -6 AN to 1/8''-27 NPTF Silver
Stainless Steel : 2' Mandrel Bent Stainless Steel 90° Bend, 2.25"
Silicone Joint: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Black
Silicone Connector: Reinforced Silicone Coupler and Clamp Kit, 2.5" - Red
Stainless Steel Pipe Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.5"
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 45° Bend, 2.5"
Turbo Coupler: 1.5" Silicone Hump Hose, Blue
Silicone 45: 1.0" Silicone 45° Elbow, Black
Bending Reducer: Silicone Reducer, 90° bend - 2.5" to 2.25" - Red
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Red/Blue
Silicone Turbo Hoses: 2.0" Silicone Straight Coupler, Red
Worm Gear Clamps: Stainless Steel 2" Worm Gear Clamp (33-57mm)
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Black
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 2.25" - Blue
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 2' Long
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.0" - Blue
Turbo Coupler: 1.625" Silicone Hump Hose, Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 1.5"
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.75"
Water Injection Tap: Stainless Steel Joiner with Water Injection/Probe Taps, 3.0"
Silicone Couplers: 4.5" Silicone Straight Coupler, Blue
: AN to NPT Adaptor, -12 AN to 3/8" NPT Silver
Stainless Steel Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.75"
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Black
Silicone T Pipe: Silicone T Pipe with 1" BOV Port - 2.5" Inlet/Outlet, blue
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.625"
Air to water fittings: Brass 3/4" NPS Male to 3/4" Barbed Straight
Silicone T Pipe: Silicone T Pipe with 1.25" BOV Port - 2.5" Inlet/Outlet, blue
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.25" - Blue
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 3.0"
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.25"
: AN 90° Union,-4 AN to -4 AN Black
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Blue
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Blue
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 90° Bend, 2.5"
Silicone 45: 1.625" Silicone 45° Elbow, Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.0"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS T4 Merge Collector
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Silver
Worm Gear Clamps: Stainless Steel 1" Worm Gear Clamp (14-27mm)
Mandrel Bent Thick SS: 1' Extra Thick Stainless Steel 180° Bend, 2.0"
Silicone 30: 3.5" Silicone 30° Elbow, Blue
Stainless Steel Thick: 2' Extra Thick Stainless Steel 180° Bend, 1.75"
T3 T3/T4 Stainless Steel Turbo Inlet Gasket: Stainless Steel Gasket, T3 T3/T4 Turbo
3.5" Black Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Black
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Red/Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.25"
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Black
Pipe Reducer: Silicone Reducer, 3.75" to 3.0" - Blue
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Silver
How to prevent header rust: 1" X 50' Fiberglass Exhaust/Header Wrap, Black
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Silver
Tube Reducer: Silicone Reducer, 3.0" to 2.75" - Red
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Silver
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 10" Long
Silicone Turbo Hoses: 2.75" Silicone Straight Coupler, Red
Pipe Reducer: Silicone Reducer, 3.75" to 3.25" - Blue
Silicone Coupler: 2.75" Silicone Straight Coupler, Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 1.5"
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -6 AN Lines (5 Pack)
Liquid to air adapters: Brass 3/4" Barbed to 3/4" Barbed Straight
Water to Air Pump 0392022002: Water to Air Intercooler Pump and Harness, Bosch Cobra
Air Filter Media: Foam Style Air Filter - blue, 2.5" inlet
Fuel Pump Mounting Bracket: 2.0" Aluminum Water/Fuel Pump Mounting Bracket, Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Blue
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.75"
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 3.0"
Electric exhaust cutout bypass motor: AllFlow Electrically Controlled Valve Control Motor
Methanol Fuel Line: AN Female to Female Union, -8 AN Black
Aluminum Pipe: Large Universal Aluminum Pipe Kit, 2.5"
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.0"
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 45° Bend, 2.75"
Aluminum Pipe: Small Universal Aluminum Pipe Kit, 2.5"
Gasket for V-Band Assembly: Gasket for 2.5" Aluminum V-Band Assembly
Aftermarket Brake Lines: AN Plug, -6 AN Silver
Pipe Reducer: Silicone Reducer, 2.25" to 1.5" - Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 4.0"
K and N Air Filter Alternative: Dual-Cone Air Filter - blue, 3.5" inlet
: AN Nut, -6 AN Black
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 10" Long
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Red
Stainless Steel : 1' Mandrel Bent Stainless Steel 180° Bend, 2.25"
Turbo Coupler: 1.75" Silicone Hump Hose, Black
Gasket for V-Band Assembly: Gasket for 4.0" Aluminum V-Band Assembly
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.5"
Pipe Reducer: Silicone Reducer, 3.0" to 2.5" - Red
Clutch Fluid Line: AN Plug, -10 AN Black
Stainless Steel : 1' Straight Stainless Steel Pipe, 2.25"
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Black
Red Hump Hose: 2.25" Silicone Hump Hose, Red
: Stainless Steel Line Straight Adaptor, -4 AN Red/Blue
Silicone 60: 4.5" Silicone 60° Elbow, Blue
Stainless Steel Tube: 1' Mandrel Bent Stainless Steel 90° Bend, 2.0"
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Black
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe Reducer, 3.0" to 2.5"
1/2" NPT Full Port Brass Ball Valve: Brass 1/2" NPT Female to 1/2" NPT Male Full Port Ball Valve
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Black
Aluminum One-Way Check Valve 6mm Barbed : Aluminum One-Way Check Valve, 6mm Barbed Silver
Bending Reducer: Silicone Reducer, 45° bend - 2.5" to 1.75" - Blue
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Black
Silicone Turbo Hoses: 1.5" Silicone Straight Coupler, Blue
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 3.0"
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, 1' Straight
Pipe Reducer: Silicone Reducer, 4.0" to 3.5" - Red
Radiator Fan Transmission Oil Cooler Mounting Kit: Radiator Fan Mounting Kit
Reducer Elbow: Silicone Reducer, 45° bend - 4.5" to 3.5" - Blue
Flexible Stainless Steel Radiator Hose: Flexible Stainless Steel Radiator Hose, 1' Long
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.125"
Water to air fittings: Brass 1/8" NPT Male to 8mm Barbed Straight
Water to air installation kit: Water to Air Intercooler Installation Kit (1200HP)
Silicone 30: 1.5" Silicone 30° Elbow, Blue
: AN 45° Union, -6 AN Black
Stainless Steel : 1' Mandrel Bent Stainless Steel 45° Bend, 2.25"
Liquid to air installation kit: Water to Air Intercooler Installation Kit (350/600HP)
Silicone 90: 4.5" Silicone 90° Elbow, Blue
Pipe Reducer: Silicone Reducer, 3.25" to 2.5" - Blue
Silicone Hose: 1.0" Silicone 2' Straight Hose, Blue
Reducer Elbow: Silicone Reducer, 90° bend - 5.0" to 4.5" - Blue
: AN Nut, -10 AN Black
Worm Gear Clamps: Stainless Steel 1.75" Worm Gear Clamp (27-51mm)
Silicone Hose: 3.5" Silicone 2' Straight Hose, Red
Transmission Cooler: Oil, Transmission, or Water Radiator/Cooler, Black (Type 103)
Stainless Steel Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.75"
: AN to NPT Adaptor, -6 AN to 3/8'' NPT Silver
Silicone 30: 1.625" Silicone 30° Elbow, Black
Silicone 60: 1.625" Silicone 60° Elbow, Black
Engine Oil Cooler: Oil, Transmission, or Water Radiator/Cooler, Silver (Type 102)
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Red
Bending Reducer: Silicone Reducer, 45° bend - 3.0" to 2.75" - Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Black
Methanol Fuel Line: AN Female to Female Union, -6 AN Blue
HKS Style BOV Flange: Universal BOV with HKS Style Flange - Silver (Type 14)
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Blue
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Shop Kit, Black
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 45° Bend, 1.5"
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Black
45 degree blue hoses: 2.75" Silicone 45° Elbow, Blue
Custom Aluminum V-Band Intake Flange: 2.75" Aluminum V-Band Clamp Rings (Set of 2)
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Red/Blue
Silicone Hose: 1.25" Silicone 2' Straight Hose, Blue
Aluminum -6 AN Fittings: Stainless Steel Line 90° Adaptor, -6 AN Gold/Blue
: AN Bulkhead Adaptor, -6 AN Black
Pipe Reducer: Silicone Reducer, 2.5" to 1.75" - Red
Worm Gear Clamps: Stainless Steel 4.5" Worm Gear Clamp (95-120mm)
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 3.0" - Blue
Braided Stainless Steel Hose: AN Plug, -8 AN Black
Pipe Reducer: Silicone Reducer, 3.0" to 2.25" - Blue
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -8 AN Lines (5 Pack)
4.0" Blue Turbo Intake Aluminum Velocity Stack: 4.0" Aluminum Velocity Stack, Blue
Silicone 180: 3.0" Silicone 180° Elbow, Red
Water to air fittings: Brass 3/8" NPT Male to 4mm Barbed Straight
Clutch Fluid Line: AN Plug, -10 AN Silver
: AN Tee, -4 AN Silver
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Black
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 90° Bend, 2.75"
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Red/Blue
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Silver
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS to 1.25" NPS Reducer
Exhaust Flex Section: 2.5" Stainless Steel Exhaust/Intake Flex Section - 8" Long
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 90°Long
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS, Tee
Hump Hose Coupler: 3.25" Silicone Hump Hose, Blue
Downpipe Gasket 2.5" GT series/T3 Turbo: Stainless Steel Gasket GT series/T3 Turbo Discharge, 2.5"
: AN Straight Union, -6 AN Silver
Methanol Fuel Line: AN Straight Union, -6 AN Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS T25/T28 Merge Collector with Flange
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe, 2.5"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 2.5" V-Band Merge Collector with Flange
Water to Air Radiator Cooler: Oil, Transmission, or Water Radiator/Cooler, Blue (Type 107)
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.375"
Methanol Fuel Line: AN Female to Female Union, -10 AN Black
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.0"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.5"
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Black
3-Bolt Exhaust Flange: Stainless Steel Exhaust Flange, 3-Bolt, 3.5"
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 1' Straight
T-bolt clamp shop kit: Stainless Steel T-Bolt Clamp Shop Kit
Coolant System and Head Gasket Pressure Test Valve: Chrome 1-1/2" tire valve for 0.453" rim hole (TR414-C)
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 90° Bend, 2.75"
Fiberglass Header Wrap: 2" X 100' Fiberglass Exhaust/Header Wrap, Blue
Silicone 180: 2.5" Silicone 180° Elbow, Red
Commercial Garden Hose: Industrial 3/4" garden hose kit (Per 10 Ft.)
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Black
Mandrel Bent Thick SS: 1' Straight Extra Thick Stainless Steel Pipe, 2.0"
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Black
Air Filter Media: Foam Style Air Filter - green, 3.5" inlet
Red Hump Hose Couplers: 2.75" Silicone Hump Hose, Red
Header Wrap: 2" X 50' Double Thick Exhaust/Header Wrap, White
: Stainless Steel Line 45° Adaptor, -4 AN Silver
Worm Gear Clamps: Stainless Steel 0.5" Worm Gear Clamp (6-16mm)
Forge Style BOV Flange: Universal BOV with Easy Installation - Silver (Type 9)
Catalytic Converter: AllFlow Test Pipe, Stainless Steel - 2"
Intake Pressure Tester: Intake Pressure Tester, 2.5" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.5" - Black
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Black
Intake Pressure Tester: Intake Pressure Tester, 1.5" - Blue
Silicone 180: 2.25" Silicone 180° Elbow, Black
Intake Pressure Tester: Intake Pressure Tester, 2.0" - Blue
Intake Pressure Tester: Intake Pressure Tester, 1.5" - Black
Intake Pressure Tester: Intake Pressure Tester, 1.75" - Black
Intake Pressure Tester: Intake Pressure Tester, 2.0" - Black
Intake Pressure Tester: Intake Pressure Tester, 1.75" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.25" - Blue
Intake Pressure Tester: Intake Pressure Tester, 2.25" - Black
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.5" NPS 3.0" V-Band Merge Collector with Flange
Intake Pressure Tester: Intake Pressure Tester, 3.0" - Blue
Engine Antifreeze Adaptor: AN Tee, -8 AN Blue
Silicone 135: 3.0" Silicone 135° Elbow, Red
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Silver
Intake Pressure Tester: Intake Pressure Tester, 2.75" - Black
Intake Pressure Tester: Intake Pressure Tester, 3.0" - Black
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Silver
Intake Pressure Tester: Intake Pressure Tester, 2.75" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.25" - Black
Intake Pressure Tester: Intake Pressure Tester, 3.25" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.5" - Blue
Intake Pressure Tester: Intake Pressure Tester, 3.5" - Black
Silicone 180: 2.0" Silicone 180° Elbow, Blue
Intake Pressure Tester: Intake Pressure Tester, 4.0" - Blue
Aluminum One-Way Check Valve 8mm Barbed : Aluminum One-Way Check Valve, 8mm Barbed Silver
Intake Pressure Tester: Intake Pressure Tester, 4.0" - Black
Exhaust Heat Wrap: 2" X 50' Fiberglass Exhaust/Header Wrap, Tan
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, Tee
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 45° Bend, 1.5"
Engine Coolant Adaptor: AN Tee, -6 AN Black
Stainless Steel : 1' Mandrel Bent Stainless Steel 90° Bend, 2.25"
Silicone 135: 2.75" Silicone 135° Elbow, Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Silver
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Blue
Methanol Fuel Line: AN Straight Union, -8 AN Blue
: AN Tee, -12 AN Black
Worm Gear Clamps: Stainless Steel Worm Gear Clamp Shop Kit
K & N Air Filter Alternative: Dual-Cone Air Filter - blue, 2.5" inlet
WRX Style BOV Flange: Universal BOV with WRX Style Flange - Silver (Type 12)
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Red
AN Lines Pressure Tester: AN to NPT Female Adaptor, -8 AN to 1/8''-27 NPTF Silver
Silicone 135: 3.0" Silicone 135° Elbow, Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS, 180°Long
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 180°Long
: AN Straight Union, -10 AN Silver
TurboXS Style BOV Flange: Universal Beehive Style BOV - Silver (Type 13)
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Silver
Silicone 180: 2.25" Silicone 180° Elbow, Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -8 AN to 1/2" NPT Black
Silicone Turbo Hoses: 3.25" Silicone Straight Coupler, Blue
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Blue
AN Lines Pressure Tester: AN to NPT Female Adaptor, -10 AN to 1/8''-27 NPTF Silver
Silicone Boost Vacuum Hose: Silicone Boost/Vacuum Hose Engine Dress Up Kit, Black
Pipe Reducer: Silicone Reducer, 1.75" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 1.375" to 1.0" - Black
Carbon Air Filter: Air Filter with Splash Guard - Carbon Fiber, 2.5" inlet
Pipe Reducer: Silicone Reducer, 1.625" to 1.125" - Black
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Silver
Silicone Turbo Hoses: 1.75" Silicone Straight Coupler, Blue
Pipe Reducer: Silicone Reducer, 2.0" to 1.375" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.5" - Black
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 90°Short
: NPT Plug, 1/8" NPT Black
: AN Bulkhead Adaptor, -8 AN Black
Gasket for V-Band Assembly: Gasket for 2.75" Aluminum V-Band Assembly
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Black
1/8"-27 NPT Male to 5/16"-32 NPT Female Adaptor: Brass 1/8"-27 NPT Male to 5/16"-32 NPT Female Adaptor
Aluminum -10AN Fittings: Stainless Steel Line Straight Adaptor, -10 AN Gold/Blue
: AN Nut, -8 AN Black
Braided Stainless Steel Hose: AN Plug, -8 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Red/Blue
Tube Reducer: Silicone Reducer, 2.75" to 2.5" - Red
Water to air fittings: Brass 3/8" NPT Male to 10mm Barbed Straight
: AN Female to Female Union, -4 AN Black
Water to air fittings: Brass 1/2" NPT Male to 5/8" Barbed Straight
Aluminum -12 AN Fittings: Stainless Steel Line 90° Adaptor, -12 AN Gold/Blue
EVO 8 T-Bolt Clamps: SaytheB EVO 10 T-Bolt Clamp Kit
: AN Bulkhead Adaptor, -10 AN Black
Aluminum Pipe: 2' Mandrel Bent Aluminum 135° Bend, 2.75"
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 2.75"
Replacement Air Filter: Dual-Cone Air Filter - chrome, 2.5" inlet
Exhaust Flex Section: 2.0" Stainless Steel Exhaust/Intake Flex Section - 8" Long
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Red/Blue
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Red/Blue
Aluminum -8 AN Fittings: Stainless Steel Line 90° Adaptor, -8 AN Gold/Blue
Silicone 30: 1.0" Silicone 30° Elbow, Blue
Silicone 60: 1.0" Silicone 60° Elbow, Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Black
Methanol Fuel Line: AN Female to Female Union, -12 AN Black
EVO 8 T-Bolt Clamps: Cajun Power EVO 7, 8, 9 T-Bolt Clamp Kit
Water to air fittings: Brass 3/4" NPT Male to 1" Barbed 90 Elbow
: AN Bulkhead Adaptor, -6 AN Blue
Reducer Elbow: Silicone Reducer, 45° bend - 3.0" to 2.5" - Red
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Black
Silicone 45: 1.75" Silicone 45° Elbow, Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 135° Bend, 1.5"
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Silver
Reducer Elbow: Silicone Reducer, 45° bend - 2.75" to 2.5" - Blue
Methanol Fuel Line: AN Female to Female Union, -8 AN Blue
Stainless Steel Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.75"
: Stainless Steel Line 90° Adaptor, -4 AN Red/Blue
: Stainless Steel Line 90° Adaptor, -4 AN Gold/Blue
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Blue
Reducer Elbow: Silicone Reducer, 45° bend - 2.25" to 2.0" - Blue
Mandrel Bent Thick Stainless Steel Tubing: 2' Extra Thick Stainless Steel 135° Bend, 2.25"
Silicone 45: 1.0" Silicone 45° Elbow, Blue
Stainless Steel Pipe Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.5"
Silicone 30: 1.25" Silicone 30° Elbow, Blue
Silicone 60: 1.25" Silicone 60° Elbow, Black
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 45° Bend, 1.625"
Reducer Elbow: Silicone Reducer, 90° bend - 3.0" to 2.5" - Red
Silicone 30: 3.25" Silicone 30° Elbow, Blue
Silicone 60: 3.25" Silicone 60° Elbow, Black
Bending Reducer: Silicone Reducer, 90° bend - 3.0" to 2.75" - Red
Engine Antifreeze Adaptor: AN Tee, -8 AN Black
Silicone 135: 2.0" Silicone 135° Elbow, Blue
Silicone 30: 1.625" Silicone 30° Elbow, Blue
Silicone 60: 1.625" Silicone 60° Elbow, Blue
: Stainless Steel Line 180° Adaptor, -4 AN Black
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.5" - Blue
Stainless Steel Tube Thick: 2' Extra Thick Stainless Steel 135° Bend, 1.625"
Reducer Elbow: Silicone Reducer, 90° bend - 2.75" to 2.5" - Red
Exhaust Heat Wrap: 1" X 50' Double Thick Exhaust/Header Wrap, White
Silicone Elbow: 2.25" Silicone 90° Elbow, Red
: AN Bulkhead Adaptor, -8 AN Blue
Silicone 30: 2.25" Silicone 30° Elbow, Blue
Silicone Bend: 2.25" Silicone 45° Elbow, Red
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Black
Reducer Elbow: Silicone Reducer, 45° bend - 4.0" to 3.5" - Blue
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Black
Reducer Elbow: Silicone Reducer, 45° bend - 5.0" to 4.0" - Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS, 180°Long
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -8 AN, Silver
Ethanol Compatible Fuel Filter: Inline High Flow Fuel Filter, -6 AN, Silver
: AN Nut, -8 AN Blue
Stainless Steel Tube: 2' Mandrel Bent Stainless Steel 135° Bend, 2.0"
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Gold/Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS to 1.5" NPS Reducer
Silicone Bend: 2.25" Silicone 45° Elbow, Blue
Water to air fittings: Brass 1/8" NPT Male to 3/8" Barbed Straight
Water to air fittings: Brass 1/4" NPT Male to 8mm Barbed Straight
Silicone 60: 3.25" Silicone 60° Elbow, Blue
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 135° Bend, 2.75"
Silicone 60: 2.75" Silicone 60° Elbow, Blue
Silicone 60: 3.5" Silicone 60° Elbow, Blue
: AN to Barbed Fitting Adaptor, -4 AN to 8mm Silver
Mandrel Bent Stainless Steel Tubing: 2' Mandrel Bent Stainless Steel 180° Bend, 2.75"
Silicone 45: 3.25" Silicone 45° Elbow, Blue
45 Degree Red Hoses: 2.75" Silicone 45° Elbow, Red
Air to water adapters: Brass 3/4" NPS Female to 3/4" Barbed Straight Swivel
Stainless Steel Pipe: 2' Mandrel Bent Stainless Steel 135° Bend, 1.5"
Aluminum One-Way Check Valve -3AN: Aluminum One-Way Check Valve, -3AN Silver
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -4 AN Lines (5 Pack)
: AN Bulkhead Adaptor, -4 AN Blue
90 Degree Red Hoses: 2.75" Silicone 90° Elbow, Red
90 degree blue hoses: 3.25" Silicone 90° Elbow, Blue
Transmission Fluid Line: AN 90° Union, -6 AN to -6 AN Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2.5" NPS to 1.5" NPS Reducer
Bending Reducer: Silicone Reducer, 90° bend - 3.25" to 2.5" - Blue
Gasket for V-Band Assembly: Gasket for 2.25" Aluminum V-Band Assembly
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.25" NPS, Tee
Reducer Elbow: Silicone Reducer, 90° bend - 3.5" to 3.0" - Red
: AN Straight Union, -8 AN Silver
Water to air fittings: Brass 1" NPT Male to 1-1/4" Barbed Straight
Custom Aluminum V-Band Intake Flange: 1.5" Aluminum V-Band Clamp Rings (Set of 2)
Replacement Brake Lines: Stainless Steel Line Straight Adaptor, -6 AN Gold/Blue
: NPT Plug, 3/4" NPT Black
Stainless Steel : 2' Mandrel Bent Stainless Steel 135° Bend, 2.25"
Bending Reducer: Silicone Reducer, 45° bend - 4.0" to 2.5" - Blue
Turbo Coupler: 3.5" Silicone Hump Hose, Red
Reducer Elbow: Silicone Reducer, 90° bend - 4.0" to 3.5" - Red
Stainless Steel Cushion Clamps: Stainless Steel Cushion Clamps for -12 AN Lines (5 Pack)
Turbo Coupler: 1.0" Silicone Hump Hose, Black
Turbo Coupler: 1.25" Silicone Hump Hose, Black
Turbo Coupler: 1.25" Silicone Hump Hose, Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, Tee
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Blue
Silicone Turbo Hoses: 1.25" Silicone Straight Coupler, Blue
Y Reducer Exhaust Pipe: Stainless Steel Exhaust Y Pipe Reducer, 2.5" to 2.25"
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Black
Turbo Coupler: 1.75" Silicone Hump Hose, Blue
Stainless Steel Tube Thick: 1' Straight Extra Thick Stainless Steel Pipe, 1.625"
Turbo Coupler: 4.5" Silicone Hump Hose, Blue
: AN Female to Female Union, -12 AN Silver
Header Wrap: 2" X 50' Fiberglass Exhaust/Header Wrap, Blue
Pipe Reducer: Silicone Reducer, 3.25" to 2.25" - Black
Air Filter Media: Foam Style Air Filter - blue, 3.5" inlet
Exhaust Heat Wrap: 1" X 50' Fiberglass Exhaust/Header Wrap, Blue
Mandrel SS Thick: 1' Extra Thick Stainless Steel 135° Bend, 2.5"
Pipe Reducer: Silicone Reducer, 3.5" to 2.75" - Blue
Pipe Reducer: Silicone Reducer, 3.25" to 2.75" - Blue
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 90° Bend, 1.625"
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 180°Long
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, Tee
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.5"
: AN Nut, -4 AN Silver
Exhaust Manifold Heat Wrap: 1" X 50' Fiberglass Exhaust/Header Wrap, Tan
Stainless Steel Pipe Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.5"
T4 Stainless Steel Turbo Divided Inlet Gasket: Stainless Steel Gasket, T4 Turbo (Divided)
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 135° Bend, 1.625"
Pipe Reducer: Silicone Reducer, 1.75" to 1.375" - Black
Pipe Reducer: Silicone Reducer, 1.375" to 1.25" - Black
Worm Gear Clamps: Stainless Steel 5" Worm Gear Clamp (118-140mm)
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Silver
Pipe Reducer: Silicone Reducer, 1.875" to 1.375" - Black
Pipe Reducer: Silicone Reducer, 2.0" to 1.125" - Black
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 135° Bend, 2.75"
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.25"
Pipe Reducer: Silicone Reducer, 1.875" to 1.0" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.125" - Black
T25/T28 Turbo Flange: Stainless Steel Flange, T25/T28 Turbo
: NPT Plug, 1/8" NPT Blue
Pipe Reducer: Silicone Reducer, 3.75" to 2.75" - Black
Pipe Reducer: Silicone Reducer, 3.75" to 2.75" - Blue
: AN to NPT 90° Adaptor, -10 AN to 1/2'' NPT Blue
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Silver
: AN Nut, -6 AN Blue
Pipe Reducer: Silicone Reducer, 3.75" to 3.5" - Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Silver
Air Filter Media: Foam Style Air Filter - red, 3.5" inlet
AN Lines Pressure Tester: AN to NPT Female Adaptor, -12 AN to 1/8''-27 NPTF Silver
Stainless Steel : 1' Mandrel Bent Stainless Steel 135° Bend, 2.25"
Stainless Steel Pipe: 1' Mandrel Bent Stainless Steel 135° Bend, 1.5"
Mandrel SS: 1' Mandrel Bent Stainless Steel 135° Bend, 3.0"
Stainless Steel Tube Thick: 1' Extra Thick Stainless Steel 180° Bend, 1.625"
3.0" Blue Turbo Intake Aluminum Velocity Stack: 3.0" Aluminum Velocity Stack, Blue
3.5" Blue Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Blue
Water to air fittings: Brass 1/4" NPT Male to 4mm Barbed Straight
Water to air fittings: Brass 1/4" NPT Male to 6mm Barbed Straight
: AN Nut, -10 AN Blue
Water to air fittings: Brass 1/4" NPT Male to 3/8" Barbed Straight
Water to air fittings: Brass 3/8" NPT Male to 8mm Barbed Straight
Coolant System and Head Gasket Pressure Test Valve: Chrome 1-1/4" tire valve for 0.453" rim hole (TR413-C)
: Stainless Steel Line Straight Adaptor, -4 AN Gold/Blue
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Black
: AN Nut, -12 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Silver
: AN Bulkhead Adaptor, -10 AN Silver
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Red/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Red/Blue
Pipe Reducer: Silicone Reducer, 1.375" to 1.125" - Black
Pipe Reducer: Silicone Reducer, 1.875" to 1.25" - Black
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Black
: NPT Plug, 1/2" NPT Black
Water to air fittings: Brass 3/4" NPT Male to 1" Barbed Straight
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Silver
Mandrel Bent SS: 1' Mandrel Bent Stainless Steel 135° Bend, 2.5"
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Black
: AN 90° Union,-4 AN to -4 AN Silver
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Gold/Blue
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Silver
: AN to NPT 90° Adaptor, -6 AN to 1/2'' NPT Blue
: AN Bulkhead Adaptor, -10 AN Blue
Pipe Reducer: Silicone Reducer, 2.75" to 1.75" - Blue
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Red/Blue
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Gold/Blue
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Red/Blue
12AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -12 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -12 AN Black
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -12 AN Silver
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Black
: AN 45° Union, -8 AN Black
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Black
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -10 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -10 AN Red/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Silver
10AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -10 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -10 AN Gold/Blue
Silicone Couplers: 3.75" Silicone Straight Coupler, Blue
: AN Bulkhead Adaptor, -12 AN Silver
3.5" Silver Turbo Intake Aluminum Velocity Stack: 3.5" Aluminum Velocity Stack, Silver
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 1' Straight
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Red/Blue
Aluminum -10 AN Fittings: Stainless Steel Line 180° Adaptor, -10 AN Gold/Blue
: AN to NPT 90° Adaptor, -6 AN to 1/4'' NPT Blue
: AN to NPT Adaptor, -10 AN to 3/8" NPT Silver
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 1' Straight
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Red/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Silver
8AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -8 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -8 AN Silver
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -12 AN Black
Aluminum -12 AN Fittings: Stainless Steel Line 180° Adaptor, -12 AN Silver
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -10 AN to 1/2" NPT Silver
Upgraded Brake Fluid Line: AN Tee, -10 AN Blue
Mandrel Bent Stainless Steel Tubing: 1' Mandrel Bent Stainless Steel 180° Bend, 2.75"
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Red/Blue
Aluminum -8 AN Fittings: Stainless Steel Line 180° Adaptor, -8 AN Gold/Blue
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1.5" NPS to 1.25" NPS Reducer
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS, 180°Long
: Stainless Steel Line 180° Adaptor, -4 AN Silver
Intercooler Pipe Fabrication: Stainless Steel Joiner, 1.875"
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Silver
Engine Coolant Adaptor: AN Tee, -6 AN Silver
: Stainless Steel Line 45° Adaptor, -4 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Gold/Blue
: Stainless Steel Line 45° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -4 AN Silver
Upgraded Brake Fluid Line: AN Tee, -10 AN Silver
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Silver
Water Injection: Stainless Steel Joiner with Water Injection/Probe Taps, 2.0"
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Gold/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Red/Blue
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -4 AN Silver
Engine Antifreeze Adaptor: AN Tee, -8 AN Silver
: Stainless Steel Line 180° Adaptor, -4 AN Gold/Blue
: Stainless Steel Line 180° Adaptor, -4 AN Red/Blue
6AN Adaptor for Stainless Steel Lines: Stainless Steel Line 45° Adaptor, -6 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Red/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Gold/Blue
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Gold/Blue
Stainless Steel Lines 30 Degree Adaptor: Stainless Steel Line 30° Adaptor, -6 AN Silver
Stainless Steel Lines 60 Degree Adaptor: Stainless Steel Line 60° Adaptor, -6 AN Silver
Stainless Steel Lines 135 Degree Adaptor: Stainless Steel Line 135° Adaptor, -6 AN Gold/Blue
Engine Coolant Adaptor: AN Tee, -6 AN Blue
Water Pump Mounting Bracket: 2.0" Pump Mounting Kit
Bosch 044 Fuel Pump Mounting Bracket: 2.25" Pump Mounting Kit
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.75"
: AN Tee, -12 AN Silver
Fuel Pump Mounting Bracket: 2.5" Pump Mounting Kit
Oil Pump Mounting Bracket: 2.75" Pump Mounting Kit
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1.25" NPS to 1" NPS Reducer
: AN Tee, -12 AN Blue
Automotive Pump Mounting Bracket: 3.0" Pump Mounting Kit
Water Pump Mounting Bracket: 3.25" Pump Mounting Kit
Aluminum -6 AN Fittings: Stainless Steel Line 180° Adaptor, -6 AN Red/Blue
Oil Pump Mounting Bracket: 3.75" Pump Mounting Kit
Fuel Pump Mounting Bracket: 3.5" Pump Mounting Kit
Gasket for V-Band Assembly: Gasket for 3.5" Aluminum V-Band Assembly
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 90°Long
Automotive Pump Mounting Bracket: 4.0" Pump Mounting Kit
Water Pump Mounting Bracket: 4.25" Pump Mounting Kit
Fuel Pump Mounting Bracket: 4.75" Pump Mounting Kit
Oil Pump Mounting Bracket: 5.25" Pump Mounting Kit
Header Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 2" NPS to 1.25" NPS Reducer
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Silver
Schedule 40 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 40, 1" NPS, 45°Long
Silicone Turbo Hoses: 3.5" Silicone Straight Coupler, Blue
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 90°Long
Exhaust Manifold Fabrication Parts: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 2" NPS to 1.25" NPS Reducer
AN Lines Pressure Tester: AN to NPT Female Adaptor, -4 AN to 1/8''-27 NPTF Silver
Transmission Fluid Line: AN 90° Union, -8 AN to -8 AN Blue
Silicone Turbo Hoses: 1.0" Silicone Straight Coupler, Blue
Aluminum Pipe: 1' Mandrel Bent Aluminum 180° Bend, 2.25"
Schedule 10 304 Stainless Steel: Exhaust Manifold/Header 304 SS Pipe: Sch. 10, 1" NPS, 45°Long
: AN 45° Union, -12 AN Silver
: AN 45° Union, -12 AN Blue
: AN 90° Union,-12 AN to -12 AN Blue
: AN 90° Union,-12 AN to -12 AN Silver
: AN 45° Union, -12 AN Black
: AN 90° Union,-12 AN to -12 AN Black
Methanol Fuel Line: AN Female to Female Union, -12 AN Blue
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Silver
: AN Plug, -4 AN Silver
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Silver
Transmission Fluid Line: AN 90° Union, -10 AN to -10 AN Blue
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Silver
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Blue
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 2.75"
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 4.0"
: AN to Barbed Fitting Adaptor, -8 AN to 4mm Silver
: AN to NPT 90° Adaptor, -12 AN to 1/2'' NPT Black
: AN to Barbed Fitting Adaptor, -6 AN to 8mm Silver
: NPT Plug, 1/8" NPT Silver
: AN to Barbed Fitting Adaptor, -8 AN to 6mm Silver
: AN to Barbed Fitting Adaptor, -8 AN to 8mm Silver
: AN to Barbed Fitting Adaptor, -8 AN to 10mm Silver
: NPT Plug, 3/8" NPT Black
: AN to NPT Adaptor, -4 AN to 3/8'' NPT Silver
Water to air fittings: Brass 3/8" NPT Male to 3/8" Barbed Straight
: AN to Barbed Fitting Adaptor, -4 AN to 6mm Silver
Water to air fittings: Brass 1/2" NPT Male to 1" Barbed Straight
: AN to Barbed Fitting Adaptor, -10 AN to 4mm Silver
: AN Nut, -4 AN Black
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Blue
: AN to NPT 45° Adaptor, -12 AN to 1/2'' NPT Black
Aluminum -12AN Fittings: Stainless Steel Line Straight Adaptor, -12 AN Gold/Blue
: AN to Barbed Fitting Adaptor, -4 AN to 10mm Silver
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -4 AN to -3 AN Black
: AN Plug, -4 AN Blue
: AN Plug, -4 AN Black
T3 T3/T4 Stainless Steel Turbo Divided Inlet Gasket: Stainless Steel Gasket, T3 T3/T4 Turbo (Divided)
: AN to Barbed Fitting Adaptor, -10 AN to 6mm Silver
Methanol Fuel Line: AN Female to Female Union, -10 AN Silver
2-bolt Graphite Exhaust Gasket: Reinforced Gasket, 2-bolt, 3.5"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.25"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 2.75"
3-Bolt Graphite Exhaust Gasket: Reinforced Gasket, 3-bolt, 3.5"
: AN Plug, -12 AN Blue
: NPT Plug, 1/2" NPT Blue
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Blue
: AN Bulkhead Adaptor, -8 AN Silver
Water to air fittings: Brass 1" NPT Male to 1" Barbed Straight
: AN Nut, -6 AN Silver
Oil Cooler Adaptor: AN to NPT Adaptor, -10 AN to 3/4" NPT Blue
: AN to NPT Adaptor, -4 AN to 1/8'' NPT Blue
: AN to NPT 90° Adaptor, -4 AN to 1/8'' NPT Blue
: AN 45° Union, -6 AN Silver
Methanol Fuel Line: AN Straight Union, -12 AN Blue
: AN 45° Union, -6 AN Blue
: NPT Plug, 1/4" NPT Silver
: AN Nut, -8 AN Silver
: NPT Plug, 1/4" NPT Blue
: NPT Plug, 1/4" NPT Black
Braided Stainless Steel Hose: AN Plug, -8 AN Blue
Methanol Fuel Line: AN Straight Union, -12 AN Black
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.0"
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -6 AN to 1/2" NPT Blue
: AN to NPT Adaptor, -4 AN to 1/4'' NPT Blue
: AN Nut, -10 AN Silver
Clutch Fluid Line: AN Plug, -10 AN Blue
: NPT Plug, 3/8" NPT Silver
: NPT Plug, 3/8" NPT Blue
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 2.25"
Water to air fittings: Brass 3/8" NPT Male to 6mm Barbed Straight
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Silver
: AN to NPT Adaptor, -6 AN to 1/8'' NPT Blue
: AN Tee, -4 AN Blue
: AN Tee, -4 AN Black
: AN to Barbed Fitting Adaptor, -4 AN to 4mm Silver
Custom Brake Lines: Stainless Steel Line Straight Adaptor, -8 AN Gold/Blue
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Blue
: AN to NPT Adaptor, -12 AN to 3/4'' NPT Black
: AN 45° Union, -10 AN Black
: AN 45° Union, -10 AN Silver
: AN 45° Union, -10 AN Blue
Liquid Air Adapter: Water I/O 90° 5/8" Adapter for Water to Air Intercoolers
: AN to NPT Adaptor, -6 AN to 1/4'' NPT Blue
: AN Nut, -12 AN Blue
: AN Nut, -12 AN Black
: AN to Barbed Fitting Adaptor, -6 AN to 4mm Silver
: AN Straight Union, -4 AN Silver
Methanol Fuel Line: AN Straight Union, -4 AN Blue
Methanol Fuel Line: AN Straight Union, -4 AN Black
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Black
: AN to NPT Adaptor, -8 AN to 1/4'' NPT Blue
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Black
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -6 AN to 1/2'' NPT Blue
: AN Bulkhead Adaptor, -6 AN Silver
Methanol Fuel Line: AN Straight Union, -10 AN Blue
: AN Plug, -12 AN Silver
: NPT Plug, 1/2" NPT Silver
: AN to NPT 45° Adaptor, -4 AN to 1/8'' NPT Silver
: AN Plug, -12 AN Black
: AN to NPT Adaptor, -8 AN to 3/8'' NPT Silver
: AN Bulkhead Adaptor, -4 AN Silver
: AN Bulkhead Adaptor, -4 AN Black
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Silver
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Silver
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Blue
: AN to NPT 45° Adaptor, -8 AN to 1/2'' NPT Black
Exhaust Band Clamp: Stainless Steel Exhaust Band Clamp, 3.0"
Methanol Fuel Line: AN Male to Male Reducer, -6 AN to -4 AN Blue
Methanol Fuel Line: AN Female to Female Union, -8 AN Silver
: AN 45° Union, -4 AN Blue
: AN 45° Union, -4 AN Black
: AN 45° Union, -4 AN Silver
: AN 90° Union,-4 AN to -4 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -8 AN to -6 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Black
: AN 45° Union, -8 AN Silver
: AN 45° Union, -8 AN Blue
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Silver
: AN to NPT 90° Adaptor, -8 AN to 1/2'' NPT Silver
: AN to NPT 45° Adaptor, -6 AN to 1/4'' NPT Blue
: AN to NPT 45° Adaptor, -10 AN to 1/2'' NPT Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -6 AN Silver
: NPT Plug, 3/4" NPT Blue
Methanol Fuel Line: AN Male to Male Reducer, -10 AN to -8 AN Silver
: NPT Plug, 3/4" NPT Silver
: AN Bulkhead Adaptor, -12 AN Black
: AN Bulkhead Adaptor, -12 AN Blue
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Silver
: AN Female to Female Union, -4 AN Silver
: AN Female to Female Union, -4 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -8 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -10 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -12 AN to -6 AN Black
Nitrous Oxide Braided Stainless Steel Adaptor: AN to NPT Adaptor, -12 AN to 1/2" NPT Blue
Gasket for V-Band Assembly: Gasket for 1.5" Aluminum V-Band Assembly
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Silver
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -10 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Blue
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Black
Methanol Fuel Line: AN Male to Male Reducer, -16 AN to -12 AN Silver
Coolant System and Head Gasket Pressure Test Valve: Standard 1-1/2" tire valve for 0.453" rim hole (TR414)
Methanol Fuel Line: AN Female to Female Union, -6 AN Silver
Gasket for V-Band Assembly: Gasket for 2.0" Aluminum V-Band Assembly
Water to air fittings: 12AN brass ring
Worm Gear Clamps: Stainless Steel 4.75" Worm Gear Clamp (103-127mm)
Worm Gear Clamps: Stainless Steel 6" Worm Gear Clamp (143-165mm)
Worm Gear Clamps: Stainless Steel 6.5" Worm Gear Clamp (155-178mm)
Coolant System and Head Gasket Pressure Test Valve: Standard 1-1/4" tire valve for 0.453" rim hole (TR413)